| |
|
 |
DALLAS[Dallas Semiconductor]
|
| Part No. |
DS1227 DS1227S
|
| OCR Text |
...e primary +5V output, typically tied to the microcontroller's VCC pin, is "kickstarted" on in response to any one of several possible momentary, external signal transitions. Two auxiliary +5V power supply outputs can then be independently e... |
| Description |
KickStarter Chip
|
| File Size |
141.22K /
20 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
INTERSIL[Intersil Corporation]
|
| Part No. |
HC5517103 HC55171IM
|
| OCR Text |
...ogic control input that must be tied high for proper SLIC operation. TTL compatible logic control input that must be tied high for proper SLIC operation. Switch Hook Detection - An active low TTL compatible logic output. Indicates an off-ho... |
| Description |
5 REN Ringing SLIC for ISDN Modem/TA and WLL
|
| File Size |
379.15K /
20 Page |
View
it Online |
Download Datasheet |
| |
|
|
INTERSIL[Intersil Corporation]
|
| Part No. |
HIP408604 HIP4086APZ HIP4086 HIP4086AB HIP4086ABZ HIP4086AP
|
| OCR Text |
...le on previous page. If RDEL is tied to ground, dead time is disabled and the outputs follow the inputs. Care must be taken to avoid shoot-through in this application. DIS (Pin 10) also overrides the high side inputs. xHI can be driven by s... |
| Description |
Driver, Three Phase Bridge N-Channel MOSFET Driver
80V, 0.5A Three Phase Driver
|
| File Size |
175.66K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
INTERSIL[Intersil Corporation]
http://
|
| Part No. |
HIP901106 HIP9011ABZ HIP9011 HIP9011AB HIP9011ABT HIP9011ABZT
|
| OCR Text |
...e volt power input. This pin is tied to ground. This pin is connected to the internal mid-supply generator and is brought out for bypassing by a 0.022F capacitor. Buffered output of the integrator. Output signal is held by an internal Sampl... |
| Description |
Engine Knock Signal Processor
|
| File Size |
240.90K /
11 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
