specification gc30u-0p1j gc30u-1p1j gc30u-11p1j gc30u-2p1j gc30u-4p1j gc30u-5p1j gc30u-6p1j order no. safety model no. rated current current range rated power ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) note.7 ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc working temp. working humidity storage temp., humidity temp. coefficient vibration dimension others note packing protection 4.2v 5.6v 7.2v 8.4v 14.3v 16.8v 28.6v gc30u-0 gc30u-1 gc30u-11 gc30u-2 gc30u-4 gc30u-5 gc30u-6 4a 3.99a 3a 3a 2.09a 1.6a 1.04a 0 ~ 4a 0 ~ 3.99a 0 ~ 3a 0 ~3a 0 ~ 2.09a 0 ~ 1.6a 0 ~ 1.04a 16.8w 22.38w 21.6w 25.2w 30w 27w 30w 50mvp-p 50mvp-p 80mvp-p 80mvp-p 100mvp-p 100mvp-p 150mvp- p line regulation note.5 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 200ms, 50ms, 16ms at full load 90 ~ 264vac 127 ~ 370vdc 47 ~ 63hz 55% 70% 74% 76% 78% 78% 80% 1a / 100vac 40a / 230vac 0.25ma / 240vac ul60950-1, csa22.2 approved withstand voltage isolation resistance i/p-o/p:3kvac i/p-o/p:100m ohms / 500vdc / 25 / 70% rh 0 ~ +50 (refer to output load derating curve) 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 108*67*36mm (l*w*h) connector plug cable standard type for stock ther type available by customer requested p1j: 2.1 * 5.5 * 11mm, tuning fork type center positive ; o standard type 18 and 4ft for 4.2v~8.4v output only for stock ther type avai lable by customer requested awg ul1185 6ft ; o 1.all parameters are specified at 115vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 0% loa d. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.output charging voltage range is measured from 0% to 100% rated load. 5.line regulation is measured from low line to high line at rated load. 16.8 ~ 30w ac-dc power adaptor with charger function g c 3 0 u s e r i e s features : compliance to en55014-1 class b, fcc part 15 class b compliance to en61000-3-2,3 compliance to en61000-4-2,3,4,5,6,11, l criteria a ight industry level, harmonic current ems immunity emi conduction & radiation overload over voltage 110 ~ 135% rated output voltage protection type : clamp by zener diode universal ac input / full range with usa type 6ft power cord(2pin) class power (without earth pin) no load power consumption <1.0w constant current and voltage(cc,cv mode) suitable for continue load for high surge current equipment protections: short circuit / overload / over voltage / over temp. 2 colors led indicate for charging status fully enclosed plastic case high reliability approvals: ul / cul / cb / fcc / ce 2 years warranty ic1tj130 over temperature protection type : shut down o/p voltage, recovers automatically after t emperature goes down dc voltage set at note.2 line regulation note.5 3.6 ~ 4.4v 5 ~ 5.8v 6.5 ~ 7.5v 7.7 ~ 8.6v 13.5 ~ 14.5v 16 ~ 17v 27.1 ~ 28.8v charging voltage range note.4 led indicator authorized distributor: total power international, inc. toll free: 877-646-0900 ph# 978-453-7272 www.total-power.com 405g; 36pcs / 16.5kg / carton green led on <150 ~ 200ma < red led on 90 ~ 110% constant current mode and over 300% pulsing mode protection type : constant current limiting, recovers automatical ly after fault condition is removed
mechanical specification derating curve authorized distributor: total power international, inc. toll free: 877-646-0900 ph# 978-453-7272 www.total-power.com unit:mm 10 20 30 50 40 time (v,i) constant current area constant voltage area i =rated current max stage 1 stage 2 v =rated voltage max ta ( ) load (%) 0 70 100 static characteristics input voltage load (%) 0 50 60 70 60 100 260 80 90 100 80 charging curve g c 3 0 u s e r i e s c"+" 11 106 108 id 2.1 x od 5.5 69.9 42 name plate 45 12.7 17.2 35.7 60 20 610 50 rubber footx4 67 18 33.5 power led c3 r1 ul1185 18awg 1830 50 for 14.3~28.6v ul1185 16awg 1230 50 for 4.2v~8.4v 16.8 ~ 30w ac-dc power adaptor with charger function v float charging battery voltage i plug assignment led display standard plug: p1j (option) p/n red led status output charging load condition p1j center green + float charging
|