View ZSFG469711_9080040.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? ps033604-0418 product specification zmotion ? pyroelectric sensors copyright ?2018 zilog, in c. all rights reserved. www.zilog.com
ps033604-0418 disclaimer zmotion ? pyroelectric sensors product specification ii do not use this product in life support systems. life support policy zilog's products are not authorized fo r use as critical components in life support devices or systems without th e express prior written approval of the president and general counsel of zilog corporation. as used herein life support devices or systems are devices which (a) ar e intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordan ce with instructions for use provided in the labeling can be re asonably expected to result in a significant injury to the user. a critical component is any component in a life suppor t device or system whose failure to perform can be reasonably expected to cause the fa ilure of the life support device or system or to affect its safety or effectiveness. document disclaimer ?2018 zilog, inc all rights reserved . information in this publication con cerning the devices, applications, or technology described is intend ed to suggest possible uses and ma y be superseded. zilog, inc. does not assume liability for or provide a representation of accuracy of the information, devices, or technology described in this document. zilog also does not assume liability for intellectual property infringement related in any manner to use of informati on, devices, or technology described herein or otherwise. the information contained w ithin this document has been verified according to the general principles of electrical and mechanical engineering. zmotion and z8 encore! xp are trademarks or re gistered trademarks of zilog, inc. (an ixys company). all other product or service names ar e the property of their respective owners. warning:
ps033604-0418 revision history zmotion ? pyroelectric sensors product specification iii revision history each instance in the revision history table re flects a change to this document from its pre- vious revision. for more details, refer to the corresponding pages or appropriate links pro- vided in the table below. date revision level description page apr 2018 04 added the ZSFG469711 py roelectric sensor to table 1 ; updated the pyro sensor specificat ions section to include ZSFG469711 configuration and characteristics. 2 , ? 15 jan 2018 03 added dimensions to the side view drawing in figure 4. 9 sep 2017 02 updated drawings for the zsbg323671 and zsbg446671 pyro sensors . 9 , 13 dec 2014 01 original issue, split into its own do cument from the former zmotion lens and pyroelectric sensor product specif ication (ps0286), which is now titled zmotion lenses product specification. all
ps033604-0418 table of contents zmotion ? pyroelectric sensors product specification iv table of contents revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv list of figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi list of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 zmotion pyroelectric sensor selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 zmotion pyroelectric sensor specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 zre200ge sensor specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 type of sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 physical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 electrical characteristics @ 25 5c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 optical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 rohs compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 zsbg323671 sensor specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 type of sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 physical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 electrical characteristics @ 25 5c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 optical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 rohs compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mechanical drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 zsbg446671 sensor specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 type of sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 physical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 electrical characteristics @ 25 5c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 optical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 rohs compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 mechanical drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ZSFG469711 sensor specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 type of sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 physical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 electrical characteristics @ 25 5c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 optical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ps033604-0418 table of contents zmotion ? pyroelectric sensors product specification v environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 rohs compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 mechanical drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 design restrictions and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 usage restrictions and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 assembly restrictions and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 handling and storage restrictions and precautions . . . . . . . . . . . . . . . . . . . . . . 22 restrictions on product use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 customer support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4
ps033604-0418 list of figures zmotion ? pyroelectric sensors product specification vi list of figures figure 1. zre200ge mechanical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 2. zre200ge circuit configura tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 3. zre200ge test setup block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 4. zsbg323671 mechanical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 figure 5. zsbg323671 circuit configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 figure 6. zsbg323671 test setup block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 10 figure 7. zsbg446671 mechanical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 8. zsbg446671 circuit configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 figure 9. zsbg446671 test setup block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 15 figure 10. ZSFG469711 mechanical configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 figure 11. ZSFG469711 circuit configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 figure 12. ZSFG469711 test setup block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 20 list of tables table 1. zmotion pyroelectric sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ps033604-0418 overview zmotion ? pyroelectric sensors product specification 1 overview zilog?s zmotion detection and control and intrusion detection product families pro- vide integrated and flexible solutions fo r passive infrared (pir)-based motion detection applications. these product families are based on the zmotion mcu, a high-perfor- mance microcontroller featuring integrated pi r motion detection algorithms. each family includes a selection of lenses and pir sensors to fit a wide range of application require- ments. each lens and sensor combination is op timized for its intended application by con- figuration settings loaded into the zmot ion mcu ensuring the best possible performance while significantly reducing deve lopment risk and minimizing time to mar- ket. zilog?s pir motion detect ion technology provides a dr amatic improvement in both sensitivity and stability over traditional designs and is scalable to many market segments including security/intrusion detection, li ghting control, hvac, access control, vend- ing, display, proximity, power management, occupancy sensing and many others. this document provides the optical, electrical, and mechan ical specifications for the zilog-supported pyroelectric sensors include d in the zmotion family. each supported lens and pyroelectric sensor co mbination is provided with an associated configuration file for the zmotion mcu. for more information on configuration files for specific lens and sensor combinations, refer to wp0018 zmotion detection lens and pyro electric sensor configuration guide . it is possible to use other lenses and pyroelectric sensors not directly supported by zilog by developing the appropriate configuration settings based on one of the existing files. all pyroelectric sensors liste d in this document are available from zilog or from their associated manufacturers. because zilog is regu larly adding new sensor support to these zmotion product families, please obtain the latest version of this document from our website at zilog.com/zmotion .
ps033604-0418 zmotion pyroelectric sensor selection guide zmotion ? pyroelectric sensors product specification 2 zmotion pyroelectric sensor selection guide table 1 presents a short list of available pyroelectr ic sensors that support applications that employ zmotion detection and control and zmotion intrusion detection mcus. select your pyroelectric sensor from this table based on your intended application. table 1. zmotion pyroelectric sensors part number description recommended applications recommended pir lens type(s) zre200ge basic dual-element sensor ? two sensitive areas, 1.0mm x 2.0mm, spaced 1.0mm apart ? low cost ? occupancy/vacancy sensors ? hvac/energy management sensors ? intrusion motion detectors ? smart appliances narrow- to wide- angle wall-mount fresnel lenses zsbg323671 premium dual-element sensor ? two sensitive areas, 1.0mm x 2.3mm, spaced 1.0mm apart ? internal emi protection ? intrusion motion detectors ? occupancy/vacancy sensors ? hvac/energy management sensors ? smart appliances narrow- to wide- angle wall-mount fresnel lenses zsbg446671 premium quad-element sensor ? four sensitive areas, 1.0mm x 1.0mm, spaced 1.0mm apart ? symmetrical sensor organization, optimized for ceiling-mount applications ? internal emi protection ? occupancy/vacancy sensors ? hvac/energy management sensors ? intrusion motion detectors circular ceiling- mounted fresnel lenses ZSFG469711 premium dual-element sensor with circular pattern ? two sensitive areas in a tapered circular shape ? optimized for ceiling mount applications ? internal emi protection ? occupancy/vacancy sensors ? ceiling mount 360 degree motion detectors ? lighting control ? hvac circular 360 degree lenses
ps033604-0418 zmotion pyroelectric sensor specifications zmotion ? pyroelectric sensors product specification 3 zmotion pyroelectric sensor specifications this chapter presents specifications for the pyroelectric sensors selected for the zmo- tion family of products. to see the specifi cations for lenses used in zilog?s zmotion detection and control and intrusion de tection applications, refer to the zmotion lenses specification (ps0286) . zre200ge sensor specification this section describes the spec ifications for the zre200ge p assive infrared pyroelectric sensor. type of sensor balanced differential (series-opposed type.) physical configuration electrical characteristics @ 25 5c package to-5 nickel-plated metal can with dimensions; see side view, figure 1 on page 5. element geometry two sensitive areas 2.0 mm long, 1.0 mm wide and spaced 1.0 mm apart. element orientation see top view, figure 1 on page 5. lead configuration see side and base views, figure 1 on page 5. circuit configuration three-terminal sensor with source follower; see figure 2 on page 6. operating voltage 3?10 v dc (rs = 47 k ? ). source voltage 0.3?1.5 v; v d = 5 v, rs = 47 k ? . signal output minimum 2.5 v p-p ; typically 4.0 v p-p . signal output is measured at a chopper frequency of 1 hz when connected to an amplifier with a gain of 72.5 db at 1 hz and submitted to an infrared energy emission of 13 microw/cm 2 from a 420 k black body. see figure 3 on page 6.
ps033604-0418 zre200ge sensor specification zmotion ? pyroelectric sensors product specification 4 optical characteristics environmental requirements rohs compliance the zre200ge sensor conforms to the rohs directive in force at the date of issuance of this specification. noise output max. 250 mv p-p ; typically 90 mv p-p . noise output should be measured for 20 seconds when co nnected to an amplifier with a gain of 72.5 db at 1 hz and shielded from infrared energy. see figure 3 on page 6. balance output max. 15%. [ bo / |sa + sb| 0.15, in which: ? bo = balance output ? sa = signal output on element a ? sb = signal output on element b balance output is measured at a chopper frequency of 1 hz when connected to an amplif ier with a gain of 72.5 db at 1 hz and submitted to an infrared energy em ission of 13 microw/cm2 from a 420 k black body. see figure 3 on page 6. frequency response 0.3 hz to 3.0 hz / 10 db. field of view 138 from center of element on axis x. 125 from center of element on axis y. see field of view, figure 1. filter substrate silicon. cut on (5 %t abs) 5.0 0.5 m. transmission 70%; average 7?14 m. operating temperature ?30c to +70c. storage temperature ?40c to +80c. relative humidity the sensor operates withou t an increase in noise output when continuously exposed to 90?95% rh at 30c. hermetic seal the sensor must be sealed to withstand a vacuum of 21.28 kpa.
ps033604-0418 zre200ge sensor specification zmotion ? pyroelectric sensors product specification 5 figures 1 and 2 present mechanical drawings of the zre200ge pyroelectric sensor. figure 1. zre200ge mechanical configuration 4 5 ? 9.2?0.2 8.3?0.2 0.45?3 1 1 1 -0g8b .0g8b window element - . 4. 0 3 . 0 138 ? 125 ? 4.50.2 13.51.0 pcd 5.08 1 1 optical height element height 3.30.1 3.70.1 2.0 42 6b example ofl ot number field of view (figure 1-a) top view (figure 1-b) side view (figure 1-c) base view (figure 1-d) 1: drain 2: source 3: ground unit : mm
ps033604-0418 zre200ge sensor specification zmotion ? pyroelectric sensors product specification 6 figure 2. zre200ge circuit configuration figure 3. zre200ge test setup block diagram 1 drain sensor recorder measurement amp. vd:5v 3 gnd source 2 + - (+) (-) (-) (+) - + - + rs:47k measurement amp.: non-inverted type, gain 72.5 db at 1 hz , 0.4 to 2.7 hz ? -3 db occluder position signal output balance output noise output heat source 420 k black body chopper shutter occluder sensor amp. recorder aperture 12mm :1hz chopping (for noise measurement) shutter,chopper occluder occluder
ps033604-0418 zsbg323671 sensor specification zmotion ? pyroelectric sensors product specification 7 zsbg323671 sensor specification this section describes the specifications fo r the zsbg323671 passive infrared pyroelec- tric sensor. type of sensor balanced differential (series-opposed type.) physical configuration electrical characteristics @ 25 5c package to-5 nickel-plated metal can w ith dimensions as shown in side view, figure 4 on page 9. element geometry two sensitive areas 2.3 mm long, 1.0 mm wide and spaced 1.0 mm apart. element orientation see top view, figure 4 on page 9. lead configuration see side and base views, figure 4 on page 9. circuit configuration three-terminal sensor with source follower; see figure 5 on page 10. operating voltage 3?10 v dc (rs: 470 k ? ). source voltage 0.35?1.4 v (v d : 5 v vs. 470 k ? ). signal output minimum 2.6 v p-p ; typically 4.0 v p-p . signal output is measured at a chopper frequency of 1 hz when connected to an amplifier with a gain of 72.5 db at 1 hz and submitted to an infrared energy emission of 13 microw/cm 2 from a 420 k black body. see figure 6 on page 10. noise output max. 250 mv p-p ; typically 90 mv p-p . noise output should be measured for 20 seconds when co nnected to an amplifier with a gain of 72.5 db at 1 hz and shielded from infrared energy. see figure 6 on page 10.
ps033604-0418 zsbg323671 sensor specification zmotion ? pyroelectric sensors product specification 8 optical characteristics environmental requirements rohs compliance the zsbg323671 sensor conforms to the rohs di rective in force at the date of issuance of this specification. balance output max. 10%. [ bo / |sa + sb| 0.10, in which: ? bo = balance output ? sa = signal output on element a ? sb = signal output on element b balance output is measured at a chopper frequency of 1 hz when connected to an amplif ier with a gain of 72.5 db at 1 hz and submitted to an infrared energy em ission of 13 microw/cm2 from a 420 k black body. see figure 6 on page 10. frequency response 0.3 hz to 3.0 hz / 10 db. field of view 134 from center of element on axis x. 120 from center of element on axis y. see field of view, figure 4. filter substrate silicon. cut on (5 %t abs) 5.5 0.5 m. transmission 70%; average 8?13 m. operating temperature ?30c to +70c. storage temperature ?40c to +80c. relative humidity the sensor operate withou t an increase in noise output when continuously exposed to 90?95% rh at 30c. hermetic seal the sensor must be sealed to withstand a vacuum of 21.28 kpa.
ps033604-0418 zsbg323671 sensor specification zmotion ? pyroelectric sensors product specification 9 mechanical drawings figures 4 through 6 present mechanical drawings of the zsbg323671 pyro sensor. figure 4. zsbg323671 mechanical configuration

! " # $ % & '()*+, ,-.-/( 0-)12( ,-.-/( 0-)12( 3( 4.5-6 field of view (figure 1-a) top view (figure 1-b) side view (figure 1-c) base view (figure 1-d) 1: drain 2: source 3: ground unit : mm s -s 0d[
ps033604-0418 zsbg323671 sensor specification zmotion ? pyroelectric sensors product specification 10 figure 5. zsbg323671 circuit configuration figure 6. zsbg323671 test setup block diagram '5$,1 6(1625 5(&25'(5 0($685(0(17 $03 9'9 *1' 6285&( &r &r 5v 56. measurement amp.: non-inverted type, gain 72.5 db at 1 hz, 0.4 to 2.7 hz >- C3 db occluder position signal output balance output noise output +($7 6285&( . %/$&. %2'< &+233(5 6+877(5 2&&/8'(5 6(1625 $03 5(&25'(5 $3(5785( -pp +] &+233,1* )25 12,6( 0($685(0(17 >? >@ >? >@ >? >@ 2&&/8'(5 2&&/8'(5 &+233(56+877(5
ps033604-0418 zsbg446671 sensor specification zmotion ? pyroelectric sensors product specification 11 zsbg446671 sensor specification this section describes the specifications fo r the zsbg446671 passive infrared pyroelec- tric sensor. type of sensor balanced differential (series-opposed type.) physical configuration electrical characteristics @ 25 5c package to-5 nickel-plated metal can w ith dimensions as shown in side view, figure 7 on page 13. element geometry four sensitiv e areas 1.0 mm * 1.0 mm and spaced 1.0 mm apart. element orientation see top view, figure 7 on page 13. lead configuration see side and base views, figure 7 on page 13. circuit configuration three-terminal sensor with source follower; see figure 8 on page 14. operating voltage 3?10 v dc (rs: 470 k ? ). element polarity element a,c:(+ ) b,d:(?) or a,c:(?) b,d:(+). source voltage 0.35?1.4 v (vd: 5v vs. 470 k ? ). signal output min. 4.5 vp-p; typically 6.5 vp-p. (s1, s2) signal output is measured at a chopper frequency of 1 hz when connected to an amplifier with a gain of 72.5 db at 1 hz and submitted to an infrared energy emission of 13 microw/cm 2 from a 420 k black body; see figure 9 on page 15. noise output max. 250 mv p-p ; typically 90 mv p-p . noise output should be measured for 20 seconds when co nnected to an amplifier with a gain of 72.5 db at 1 hz and shielded from infrared energy; see figure 9 on page 15.
ps033604-0418 zsbg446671 sensor specification zmotion ? pyroelectric sensors product specification 12 optical characteristics environmental requirements rohs compliance the zsbg446671 sensor conforms to the rohs di rective in force at the date of issuance of this specification. balance output max. 15%. [ |s1?s2| / |s1+s2| 0.15 ? s1 = signal output on elements a + c ? s2 = signal output on elements b + d balance output is measured at a chopper frequency of 1 hz when connected to an amplif ier with a gain of 72.5 db at 1 hz and submitted to an infrared energy em ission of 13 microw/cm2 from a 420 k black body. see figure 9 on page 15. frequency response 0.3 hz to 3.0 hz / 10 db. field of view 132 from center of element on axis x. 146 from center of element on 45. see field of view, figure 4. filter substrate silicon. cut on (5 %t abs) 5.5 0.5 m. transmission 70%; average 8?13 m. operating temperature ?30c to +70c. storage temperature ?40c to +80c. relative humidity the sensor operate withou t an increase in noise output when continuously exposed to 90?95% rh at 30c. hermetic seal the sensor must be sealed to withstand a vacuum of 21.28 kpa.
ps033604-0418 zsbg446671 sensor specification zmotion ? pyroelectric sensors product specification 13 mechanical drawings figures 7 through 9 present mechanical drawings of the zsbg446671 pyro sensor. figure 7. zsbg446671 mechanical configuration field of view (figure 1-a) top view (figure 1-b) element polarity side view (figure 1-c) base view (figure 1-d) 1: drain 2: source 3: ground unit : mm $ # "
! 78 9: ;
% .. <+' .. =>?@+a)b ;
& % 3( 4.5-6 '()*+, ,-.-/( 0-)12( ,-.-/( 0-)12(
ps033604-0418 zsbg446671 sensor specification zmotion ? pyroelectric sensors product specification 14 figure 8. zsbg446671 circuit configuration '5$,1 6(1625 5(&25'(5 0($685(0(17 $03 9'9 *1' 6285&( &r &r 5v 5vn measurement amp.: non-inverted type, gain 72.5 db at 1 hz , 0.4 to 2.7 hz >- C3 db
ps033604-0418 zsbg446671 sensor specification zmotion ? pyroelectric sensors product specification 15 figure 9. zsbg446671 test setup block diagram occluder position % ' $ % & ' $ % & ' ' % $ & 2&&/8'(5 2&&/8'(5 &+233(56+877(5 signal output 1 (s1) signal output 2 (s2) noise output +($7 6285&( . %/$&. %2'< &+233(5 6+877(5 2&&/8'(5 6(1625 $03 5(&25'(5 $3(5785( -pp +] &+233,1* )25 12,6( 0($685(0(17
ps033604-0418 ZSFG469711 sensor specification zmotion ? pyroelectric sensors product specification 16 ZSFG469711 sensor specification this section describes the specifications for the ZSFG469711 passive infrared pyroelectric sensor. type of sensor balanced differential (series-opposed type). physical configuration electrical characteristics @ 25 5c package to-5 metal can with dimensions shown in figure 1-c ? (ni-plated). element geometry two sensitive areas 7.24 mm2. element orientation see figure 10 on page 18. lead configuration see figure 10 on page 18. code lot number is marked on top surface of detector. to show last one digit of the a.d. year and week of the year of an inspection co mpletion identification code. circuit configuration three-termina l sensor with source follower. see figure 11 on page 19. operating voltage 1 ~ 15 v dc (rs: 470kohm). source voltage 0.3 ~ 1.4 v (vd: 5v, rs: 470kohm). signal output min. 3.0 vp-p (typ. 5.0 vp-p). ? signal output is measured at chopper frequency of 1 hz when connected to the amplifier of gain 72.5 db (at 1 hz) and submitted to the emission of infrared energy of 13 microw/cm2 from 420 k black body. see figure 12 on page 20.
ps033604-0418 ZSFG469711 sensor specification zmotion ? pyroelectric sensors product specification 17 optical characteristics environmental requirements rohs compliance the ZSFG469711 sensor conforms to the rohs directive in force at the date of issuance of this specification. noise output max. 200 mvp-p (typ. 60 mvp-p). ? noise output shall be measured fo r 20 seconds when connected to the amplifier of gain 72.5 db (a t 1 hz) and shut out from infrared energy. see figure 12 on page 20. balance output max. 20 % ? [bo / |sa+sb| 0.20. bo : balance output. ? sa : signal output on element a. ? sb : signal output on element b. balance output is measured at ch opper frequency of 1 hz when connected to the amplifier of gain 72.5 db (at 1 hz) and submitted to the emission of infrared energy of 13 microw/cm2 from 420 k black body. see figure 12 on page 20. frequency response 0.3 hz to 3.0 hz / (+/-) 10 db. field of view 132 from center of element on axis x. 146 from center of element on axis y. see figure 10 on page 18. filter substrate silicon. cut on (5 %t abs) 5 (+/-) 1 micron. transmission 70 % average 8 to 13 micron. operating temperature ?40 c to +85 c. storage temperature ?40 c to +85 c. relative humidity the sensor shall operate without increase in noise output when exposed to 90 ~ 95 % rh at 30 c continuously. hermetic seal the sensor shall be sealed to withstand a vacuum of 21.28 kpa.
ps033604-0418 ZSFG469711 sensor specification zmotion ? pyroelectric sensors product specification 18 mechanical drawings figures 10 through 12 present mechanical drawings of the ZSFG469711 pyro sensor. figure 10. ZSFG469711 mechanical configuration
ps033604-0418 ZSFG469711 sensor specification zmotion ? pyroelectric sensors product specification 19 figure 11. ZSFG469711 circuit configuration
ps033604-0418 ZSFG469711 sensor specification zmotion ? pyroelectric sensors product specification 20 figure 12. ZSFG469711 test setup block diagram
ps033604-0418 precautions zmotion ? pyroelectric sensors product specification 21 precautions this chapter presents restrictions and prec autions that apply to zmotion pyroelectric sensors. design restriction s and precautions this sensor is designed for indoor purposes in which secondary accidents due to operation failure or malfunctions can be anticipated; therefore, add appropriate fail-safe functional- ity to your design. if these sensors are intended for outdoor applications, be sure to apply suitable supplementary optical filters and design with dr ip-proof, anti-dew construction materials. usage restrictions and precautions to prevent sensor malfunctions, operational failu re, or any deterioration of their character- istics, do not operate these zmotion sensors under the follo wing, or similar, conditions: ? rapid environmental temperature changes ? strong shocks or vibrations ? in places where there are obstructing material s (glass, fog, etc.) through which infrared rays cannot pass within the detection area ? in fluids, corrosive gases, and sea breezes ? under continual high-humid ity atmospheric conditions ? when exposed to direct sunlig ht or automobile headlights ? when exposed to directly to forced-air currents from a heater or air conditioner assembly restriction s and precautions soldering: ? use soldering iron s when soldering ? avoid extended durations of heat on the sensors? pins, because excessive heat may cause deterioration of the sensor (e.g., durations beyond 5 seconds at 350c) ? washing: ? be sure to wash out all flux after solder ing, because remaining solder materials may cause malfunctions
ps033604-0418 precautions zmotion ? pyroelectric sensors product specification 22 ? use a brush when washing; washing with an ultrasonic cleaner may cause operational failure handling and storage rest rictions and precautions to prevent sensor malfunctions, operational failure, appearance damage, or any deteriora- tion of their characteri stics, do not expose these sensors to the following, or similar, han- dling and storage conditions: ? vibrations over extended periods ? strong shocks ? static electricity or strong electromagnetic waves ? high temperature and humidity over extended periods ? corrosive gases or sea breezes ? dirty and dusty environments that may contaminate the optical window restrictions on product use the products described in this document shall not be used or embedded into any down- stream products for which thei r manufacture, use, and/or sale are prohibited under any applicable laws and regulations. sensor troubles resulting from misuse and/or in appropriate handling or storage are not the manufacturer?s responsibility.
ps033604-0418 related documents zmotion ? pyroelectric sensors product specification 23 related documents additional information about the zmotion fa milies of motion detection mcus can be found in the following docu ments, which are available from the zilog website at www.zilog.com . document number description pb0225 zmotion detection and control family product brief pb0230 zmotion intrusion dete ction product brief ps0228 z8 encore! xp ? f082a series product specification ps0285 zmotion detection an d control family pr oduct specification ps0286 zmotion lenses product specification ps0288 zmotion intrusion detectio n product specification an0307 zmotion detection module application walkthrough an0309 zmotion high brightness white le d lighting application note wp0017 a new pir motion detection architecture white paper wp0018 zmotion detection lens and pyro sensor configuration guide other zmotion family products pb0244 zmotion detection modu le ii product brief ps0305 zmotion detection module ii product specification
ps033604-0418 customer support zmotion ? pyroelectric sensors product specification 24 customer support to share comments, get your technical questio ns answered, or report issues you may be experiencing with our products, please vi sit zilog?s technical support page at ? http://support.zilog.com . to learn more about this product, find add itional documentation, or to discover other fac- ets about zilog product offerings, please visit the zilog knowledge base at http:// zilog.com/kb or consider participating in the zilog forum at http://zilog.com/forum . this publication is subject to replacement by a later edition. to determine whether a later edition exists, please vis it the zilog website at http://www.zilog.com .

▲Up To Search▲

Price & Availability of ZSFG469711

	To Download ZSFG469711 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .