View SIHJ7N65E_9077824.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 1 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 e series power mosfet features ? low figure-of- merit (fom) r on x q g ? low input capacitance (c iss ) ? reduced switching and conduction losses ? ultra low gate charge (q g ) ? avalanche energy rated (uis) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? switch mode power supplies (smps) ? flyback converter ? lighting - high-intensity discharge (hid) - fluorescent ballast lighting ? consumer - wall adaptors notes a. repetitive rating; puls e width limited by maximu m junction temperature. b. v dd = 120 v, starting t j = 25 c, l = 28.2 mh, r g = 25 ? , i as = 2.2 a. c. i sd ? i d , di/dt = 100 a/s, starting t j = 25 c. product summary v ds (v) at t j max. 700 r ds(on) typ. ( ? ) at 25 c v gs = 10 v 0.520 q g max. (nc) 44 q gs (nc) 6 q gd (nc) 9 configuration single n-channel mo s fet g d s powerpak ? s o-8l s ingle ordering information package powerpak so-8l lead (pb)-free and halo gen-free SIHJ7N65E-t1-ge3 absolute maximum ratings (t c = 25 c, unless otherwise noted) parameter symbol limit unit drain-source voltage v ds 650 v gate-source voltage v gs 30 continuous drain current (t j = 150 c) v gs at 10 v t c = 25 c i d 7.9 a t c = 100 c 5.0 pulsed drain current a i dm 17 linear derating factor 0.77 w/c single pulse avalanche energy b e as 68 mj maximum power dissipation p d 96 w operating junction and storage temperature range t j , t stg -55 to +150 c drain-source voltage slope t j = 125 c dv/dt 70 v/ns reverse diode dv/dt d 14 thermal resistance ratings parameter symbol typ. max. unit maximum junction-to-ambient r thja 52 65 c/w maximum junction-to-case (drain) r thjc 1.0 1.3
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 2 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. c oss(er) is a fixed capacitance that gives the same energy as c oss while v ds is rising from 0 % to 80 % v dss . b. c oss(tr) is a fixed capacitance that gives the same charging time as c oss while v ds is rising from 0 % to 80 % v dss . specifications (t j = 25 c, unless otherwise noted) parameter symbol test cond itions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a 650 - - v v ds temperature coefficient ? v ds /t j reference to 25 c, i d = 1 ma - 0.8 - v/c gate-source threshold voltage (n) v gs(th) v ds = v gs , i d = 250 a 2.0 - 4.0 v gate-source leakage i gss v gs = 20 v - - 100 na v gs = 30 v - - 1 a zero gate voltage drain current i dss v ds = 650 v, v gs = 0 v - - 1 a v ds = 520 v, v gs = 0 v, t j = 125 c - - 10 drain-source on-sta te resistance r ds(on) v gs = 10 v i d = 3.5 a - 0.520 0.598 ? forward transconductance g fs v ds = 30 v, i d = 3.5 a - 2.3 - s dynamic input capacitance c iss v gs = 0 v, v ds = 100 v, f = 1 mhz - 820 - pf output capacitance c oss -48- reverse transfer capacitance c rss -4- effective output capacitance, energy related a c o(er) v ds = 0 v to 520 v, v gs = 0 v -33- effective output capacitance, time related b c o(tr) - 118 - total gate charge q g v gs = 10 v i d = 3.5 a, v ds = 520 v -2244 nc gate-source charge q gs -6- gate-drain charge q gd -9- turn-on delay time t d(on) v dd = 520 v, i d = 3.5 a, v gs = 10 v, r g = 9.1 ? -1632 ns rise time t r -1836 turn-off delay time t d(off) -3060 fall time t f -1836 gate input resistance r g f = 1 mhz 0.4 0.8 1.6 ? drain-source body diode characteristics continuous source-drain diode current i s mosfet symbol showing the ? integral reverse ? p - n junction diode --7.9 a pulsed diode forward current i sm --17 diode forward voltage v sd t j = 25 c, i s = 3.5 a, v gs = 0 v - 0.9 1.2 v reverse recovery time t rr t j = 25 c, i f = i s = 3.5 a, di/dt = 100 a/s , v r = 25 v - 299 598 ns reverse recovery charge q rr -2.95.8c reverse recovery current i rrm -16-a s d g
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 3 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (25 c, unless otherwise noted) fi g . 1 - typical output characteristics fi g . 2 - typical output characteristics fi g . 3 - typical transfer characteristics fi g . 4 - normalized on-resistance vs. temperature fi g . 5 - typical capacitance vs. drain-to-source volta g e fi g . 6 - c oss and e oss vs. v ds 0 5 10 15 20 0 5 10 15 20 i d , drain-to- s ource current (a) v d s , drain-to- s ource voltage (v) t j = 25 c top 15 v 14 v 13 v 12 v 11 v 10 v 9 v 8 v 7 v 6 v bottom 5 v 0 3 6 9 12 0 5 10 15 20 i d , drain-to- s ource current (a) v d s , drain-to- s ource voltage (v) t j = 150 c top 15 v 14 v 13 v 12 v 11 v 10 v 9 v 8 v 7 v 6 v bottom 5 v 0 5 10 15 20 0 5 10 15 20 i d , drain-to- s ource current (a) v gs , g ate-to- s ource voltage (v) t j = 150 c t j = 25 c v d s = 30.6 v 0 0.5 1.0 1.5 2.0 2.5 3.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 r d s (on) , drain-to- s ource on-re s i s tance (normalized) t j , junction temperature ( c) i d = 3.5 a v gs = 10 v 1 10 100 1000 10 000 0 100 200 300 400 500 600 c, capacitance (pf) v d s , drain-to- s ource voltage (v) c i ss c o ss c r ss v gs = 0 v, f = 1 mhz c i ss = c g s + c gd , c d s s horted c r ss = c gd c o ss = c d s + c gd 0 1 2 3 4 5 6 10 100 1000 10 000 0 100 200 300 400 500 600 e o ss (j) c o ss (pf) v d s c o ss e o ss
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 4 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fi g . 7 - typical gate char g e vs. gate-to-source volta g e fi g . 8 - typical source-drain diode forward volta g e fi g . 9 - maximum safe operatin g area fi g . 10 - maximum drain curre nt vs. case temperature fi g . 11 - temperature vs. drain-to-source volta g e 0 4 8 12 16 20 24 0 10203040 v gs , g ate-to- s ource voltage (v) q g , total g ate charge (nc) v d s = 520 v v d s = 325 v v d s = 130 v 0.1 1 10 100 0.20.40.60.81.01.21.41.6 i s d , rever s e drain current (a) v s d , s ource-drain voltage (v) t j = 150 c t j = 25 c v gs = 0 v 0.01 0.1 1 10 100 1101001000 i d , drain current (a) v d s , drain-to- s ource voltage (v) * v gs > minimum v gs at which r d s (on) i s s pecified limited by r d s (on) * 1 m s i dm limited t c = 25 c t j = 150 c s ingle pul s e bvd ss limited 10 m s 100 s operation in thi s area limited by r d s (on) 0 2 4 6 8 10 25 50 75 100 125 150 i d , drain current (a) t c , ca s e temperature ( c) 625 650 675 700 725 750 775 800 825 850 -60 -40 -20 0 20 40 60 80 100 120 140 160 v d s , drain-to- s ource breakdown voltage (v) t j , junction temperature ( c) i d = 250 a
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 5 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fi g . 12 - normalized thermal transient impedance, junction-to-case fi g . 13 - normalized thermal transient impedance, junction-to-ambient fi g . 14 - switchin g time test circuit fi g . 15 - switchin g time waveforms 0.01 0.1 1 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 normalized effective tran s ient thermal impedance pul s e time ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e 0.0001 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 normalized effective tran s ient thermal impedance pul s e time ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e pulse width 1 s duty factor 0.1 % r d v gs r g d.u.t. 10 v + - v ds v dd v ds 90 % 10 % v gs t d(on) t r t d(off) t f
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 6 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fi g . 16 - unclamped inductive test circuit fi g . 17 - unclamped inductive waveforms fi g . 18 - basic gate char g e waveform fi g . 19 - gate char g e test circuit r g i as 0.01 t p d.u.t l v ds + - v dd 10 v var y t p to obtain required i as i as v ds v dd v ds t p q gs q gd q g v g charge 10 v d.u.t. 3 ma v gs v ds i g i d 0.3 f 0.2 f 50 k 12 v current regulator current sampling resistors same type as d.u.t. + -
SIHJ7N65E www.vishay.com vishay siliconix s16-0659-rev. a, 18-apr-16 7 document number: 91823 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fi g . 20 - for n-channel ? ? ? ? ? ? ? ? ? ? vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91823 . p.w. period di/dt diode recovery dv/dt ripple 5 % body diode forward drop re-applied voltage rever s e recovery current body diode forward current v gs = 10 v a i s d driver gate drive d.u.t. l s d waveform d.u.t. v d s waveform inductor current d = p.w. period + - + + + - - - peak dio d e recovery d v/ d t test circuit v dd ? dv/dt controlled by r g ? driver s ame type a s d.u.t. ? i s d controlled by duty factor d ? d.u.t. - device under te s t d.u.t. circuit layout con s ideration s ? low s tray inductance ? g round plane ? low leakage inductance current tran s former r g note a. v gs = 5 v for logic level device s v dd
package information www.vishay.com vishay siliconix revision: 16-may-16 1 document number: 69003 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 powerpak ? so-8l case outline for non-al parts b2 back s ide view (dual) b4 b3 b b1 e d d1 e e1 l1 to p s ide view a1 w l1 l 0.25 gauge line w3 w2 w1 e2 e2 d2 b3 b4 back s ide view ( s ingle) a c w3 w2 w1 k d2 d3 d3 f
package information www.vishay.com vishay siliconix revision: 16-may-16 2 document number: 69003 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? millimeters will gover dim. millimeters inches min. nom. max. min. nom. max. a 1.00 1.07 1.14 0.039 0.042 0.045 a1 0.00 - 0.127 0.00 - 0.005 b 0.33 0.41 0.48 0.013 0.016 0.019 b1 0.44 0.51 0.58 0.017 0.020 0.023 b2 4.80 4.90 5.00 0.189 0.193 0.197 b3 0.094 0.004 b4 0.47 0.019 c 0.20 0.25 0.30 0.008 0.010 0.012 d 5.00 5.13 5.25 0.197 0.202 0.207 d1 4.80 4.90 5.00 0.189 0.193 0.197 d2 3.86 3.96 4.06 0.152 0.156 0.160 d3 1.63 1.73 1.83 0.064 0.068 0.072 e 1.27 bsc 0.050 bsc e 6.05 6.15 6.25 0.238 0.242 0.246 e1 4.27 4.37 4.47 0.168 0.172 0.176 e2 3.18 3.28 3.38 0.125 0.129 0.133 f - - 0.15 - - 0.006 l 0.62 0.72 0.82 0.024 0.028 0.032 l1 0.92 1.07 1.22 0.036 0.042 0.048 k 0.51 0.020 w 0.23 0.009 w1 0.41 0.016 w2 2.82 0.111 w3 2.96 0.117 ? 0 - 10 0 - 10 ecn: t16-0221-rev. d, 16-may-16 dwg: 5976
pad pattern www.vishay.com vishay siliconix revision: 07-feb-12 1 document number: 63818 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 recommended minimum pad for powerpak ? so-8l single recommended mi nimum pad s dimen s ion s in mm (inche s ) 5.000 (0.197) 2.310 (0.091) 0.510 (0.020) 0.595 (0.023) 4.061 (0.160) 3.630 (0.143) 0.410 (0.016) 0.710 (0.028) 0.610 (0.024) 2.715 (0.107) 1.270 (0.050) 1.905 (0.075) 0.860 (0.034) 0.820 (0.032) 7.250 (0.285) 8.250 (0.325) 6.250 (0.246) 1.291 (0.051)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of SIHJ7N65E

	To Download SIHJ7N65E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .