for power line current value measurement (50/60 hz) clamp on probe 9132 -50 cat iii 600v max. circuit voltage 600v rms insulated wire 9704: use when the receiving connectors are banana-type terminals simply connect to a tester or reco rder to easily measure large currents ? ce mark compliant cat iii 600v ? choose from up to six general-purpose ranges ? for more accurate waveform recordin gs and analysis of harmonic signals, etc. basic specifications (accuracy guaranteed for 1 year, or opening an d closing of the clam p sensor 10,000 times) 9132-50 rated current ac 20/50/100/200/500/1000 a accuracy 3% rdg. 0.2% f.s. (45 to 66hz) frequency characteristics add to amplitude accuracy for frequencies from 40 to 1khz: 1% rdg. output rate 0.2v ac f.s. (f.s.=setting rage) (connect to a voltage input device providing a high input impedance of 1m ? ) max. current input (for 40hz to500 hz: 100%, and for 500hz to 1khz: within 90% of derating) 1000arms continuous (all ranges) max. circuit voltage 600vrms (insulated conductor) diameter ? 55mm (2.17in) , or 20mm (0.79in) 80mm (3.15in) busbar dimensions, mass 100mm (3.94in) w 224mm (8.82in) h 35mm (1.38in) d, 600g (21.2oz) , cord length: 3m (9.84ft)
|