elektronische bauelemente S6JB80 voltage 800v 6.0 amp glass passivited bridge rectifiers 24-apr-2013 rev. a page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. rohs compliant product a suffix of -c specifies halogen & lead-free features ideal for printed circuit board low forward voltage drop, high current capability reliable low cost construction utilizing molded pla stic technique results in inexpensive product maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. s ingle phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) parameter symbol rating unit maximum recurrent peak reverse voltage v rrm 800 v t c =131c (with heat sink) 6 average rectified output current @60hz sine wave, r-load t a =25c (without heat sink) i o 1.8 a peak forward surge current @ 60h z sine wave, 1 cycle, t a =25c i fsm 100 a maximum peak forward voltage 3 v fm 1.05 v peak reverse current 2 i rrm 10 a rating for fusing@ 1ms Q t Q 8.3ms , per diode i 2 t 41.5 a 2 s mounting torque @ recommend torque:5kgcm tor 8 kg ? cm dielectric strength 1 vdis 2 kv typical thermal resistance (with heat sink) r jc 1.5 c/w typical thermal resistance(without heat sink) r ja 40 c/w typical thermal resistance(without heat sink) r jl 6.5 c/w operating and storage temperature range t j ,t stg -55~150 c notes 1. terminals to case ac 1 minute 2. v rm =v rrm , pulse measurement, rating of per diode. 3. i fm =3a, pulse measurement, rating of per diode jb millimeter millimeter ref. min. max. ref. min. max. a 24.7 25.3 g 2.5 2.9 b 10.0 10.6 h 0.9 1.1 c 1.4(typ.) i 0.4 0.6 d 13.0 14.0 j 3.0 3.4 e 7.3 7.7 k 3.2(typ.) f 4.0 4.4
elektronische bauelemente S6JB80 voltage 800v 6.0 amp glass passivited bridge rectifiers 24-apr-2013 rev. a page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. ratings and characteristic curves
|