tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered - registration number 6830/2 for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com this specification is applied to the 860.5 mhz saw filter in a dcc6c package ( preliminary data sheet for actf860.5-33/ll/dcc6c ) 1. package dimensions (dcc6c) 2. marking 3. test circuit tbd no impedance matching required for operation at 50 . pin configuration 2 input / output 5 output / input others case ground sign data (unit: mm) sign data (unit: mm) a 0.6 e 1.1 b 1.5 f 3.0 c 1.5 g 3.0 d 1.8 issue : preliminary date 03/08/05
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered - registration number 6830/2 for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 4. frequency characteristics this is a typical frequency response of our standard 836.5mhz saw filter. only to show the intended typical frequency response of the 860.5mhz saw filter. 5. performance 5-1. maximum ratings rating value unit input power level 15 dbm dc voltage 12 v storage temperature range -40 to +100 c operating temperature range -30 to +85 c issue : preliminary date 03/08/05
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered - registration number 6830/2 for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 5-2. electronic characteristics parameter minimum typical maximum unit centre frequency f c -- 860.50 -- mhz 3db bandwidth bw 3 -- 17 -- mhz usable bandwidth bw ues -- 9.5 -- mhz insertion loss il 851.00 mhz ?. 870.00 mhz -- 2.5 3.0 db amplitude variation (p-p) 851.00 mhz ?. 870.00 mhz -- 0.80 1.5 db absolute attenuation dc ?. 650.00 mhz 650.00 mhz ?. 760.00 mhz 760.00 mhz ?. 815.00 mhz 905.00 mhz ?. 950.00 mhz 950.00 mhz ?. 2000.00 mhz 50 50 45 20 45 70 60 55 30 52 -- -- -- db input / output impedance 50 i caution: electrostatic sensitive device. observe precautions for handling! 1. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter centre frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 2. unless noted otherwise, specifications apply over the entire specified operating temperature range. 3. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 4. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 5. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. issue : preliminary date 03/08/05
|
