rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 141128 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks, and registered trademarks are the property of their respective owners. ?2013, rf micro d evices, inc. 1 of 3 RFPP3180 gaas push pull hybrid 45 mhz to 1 218m hz the RFPP3180 is a hybrid push pull amplifier module. the part employs gaas die and is operated from 45 mhz to 1 218m hz. it provides excellent linearity and superior return loss performance with low noise and optimal reliability. input output v + package: sot - 115j features excellent linearity superior r eturn loss performance extremely low distortion optimal reliability extremely low noise unconditionally stable under all terminations 34.0 db min. gain at 1 218m hz 2 80 ma max. at 24v dc applications 4 5 mhz to 1 .218 g hz cat v amplifier systems docsis 3.1 applications ordering information RFPP3180 box with 50 piece s absolute maximum rat ings parameter rating unit rf input voltage (single tone) 70 dbmv dc supply over - voltage (5 minutes) 30 v storage temperature - 40 to +100 c operating mounting base temperature - 30 to + 85 c caution! esd sensitive device. rohs (restriction of hazardous substances): compliant per eu directive 2011/65/eu. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum r ating conditions is not implie d. RFPP3180
RFPP3180 2 of 3 rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 141128 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of p atents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. nominal operating parameters parameter specification unit condition min typ max general performance v+ = 24v; t mb = 30c; z s = z l = 75 power gain 33. 5 db f = 50 mhz 34. 0 36. 0 db f = 1 218 mhz slope [ 1 ] 0.5 1.5 2.5 db f = 45 mhz to 1 218 mhz flatness of frequency response 1.0 db f = 45 mhz to 1 218 mhz input return loss 20.0 db f = 45 mhz to 160 mhz 17.0 db f = 160mhz to 870 mhz 16.0 db f = 870mhz to 1 218 mhz output return loss 20.0 db f = 45mhz to 160 mhz 17.0 db f = 160mhz to 870 mhz 16.0 db f = 870mhz to 1000 mhz 15.0 db f = 1000mhz to 1218 mhz noise figure 4.5 db f = 50mhz to 1 218 mhz total current consumption (dc) 240.0 280.0 ma distortion data 40mhz to 550 mhz v+ = 24v; t mb = 30c; z s = z l = 75 ctb - 66 - 6 2 dbc v o = 4 6 dbmv , flat, 79 analog channels plus 75 digital channels ( - 6db offset) [ [2] [4] xmod - 6 2 - 58 dbc cso - 72 - 6 8 dbc cin 60 6 4 db distortion data 40mhz to 550 mhz v+ = 24v; t mb = 30c; z s = z l = 75 ctb - 69 dbc v o = 45dbmv, flat, 79 analog channels plus 111 digital channels ( - 6db offset) [3][4] xmod - 64 dbc cso - 72 dbc cin 65 db 1. the slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 79 analog channels, ntsc frequency raster: 55.25mhz to 745.25mhz, +46dbmv flat output level, plus 75 digital channels, - 6db offset relative to the equivalent analog carrier. 3. 79 analog channels, ntsc frequency raster: 55.25mhz to 547.25mhz, +45 dbmv flat output level, plus 111 digital channels, - 6db offset relative to the equivalent analog carrier. 4. composite second order (cso) - the cso parameter (both sum and difference products) is defined by the ncta. composite triple beat (ctb) - the ctb parameter is defined by the ncta. cross modulation (xmod) - cross modulation (xmod) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested. carrier to intermodulation noise (cin) - the cin parameter is defined by ansi/scte 17 (test procedure for carrier to noise).
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 141128 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of p atents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3 RFPP3180 package drawing (dimensions in millimeters) 1 2 3 5 7 8 9 r o q m 5 10mm 0 scale b n l f a d h ? g t s p j u i e c k european projection n o m i n a l m i n m a x a 4 4 , 6 0 , 2 4 4 , 4 4 4 , 8 b 1 3 , 6 0 , 2 1 3 , 4 1 3 , 8 c 2 0 , 4 0 , 5 1 9 , 9 2 0 , 9 d 8 0 , 1 5 7 , 8 5 8 , 1 5 e 1 2 , 6 0 , 1 5 1 2 , 4 5 1 2 , 7 5 f 3 8 , 1 0 , 2 3 7 , 9 3 8 , 3 g 4 + 0 , 2 / - 0 , 0 5 3 , 9 5 4 , 2 h 4 0 , 2 3 , 8 4 , 2 i 2 5 , 4 0 , 2 2 5 , 2 2 5 , 6 j u n c 6 - 3 2 - - k 4 , 2 0 , 2 4 , 0 4 , 4 l 2 7 , 2 0 , 2 2 7 , 0 2 7 , 4 m 1 1 , 6 0 , 5 1 1 , 1 1 2 , 1 n 5 , 8 0 , 4 5 , 4 6 , 2 o 0 , 2 5 0 , 0 2 0 , 2 3 0 , 2 7 p 0 , 4 5 0 , 0 3 0 , 4 2 0 , 4 8 q 2 , 5 4 0 , 3 2 , 2 4 2 , 8 4 r 2 , 5 4 0 , 5 2 , 0 4 3 , 0 4 s 2 , 5 4 0 , 2 5 2 , 2 9 2 , 7 9 t 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 u 5 , 0 8 0 , 2 5 4 , 8 3 5 , 3 3 p i n n a m e 1 i n p u t 2 - 3 g n d 4 5 v + 6 7 - 8 g n d 9 o u t p u t pinning: notes:
|
