technical data sheet draft micro rf cable assembly lh1-099-xxx rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 4 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to 15k101-40m iec 60169-15 suitable cables rtk 013, cable group h1 micro coax cable d=1.37mm, center conductor awg30 connector are only sold with cable minimum bending radius single 4x ? minimum bending radius repeated 8x ? available variants type cable length a [mm] weight [g] lh1-099-100 h1 100 4.6 LH1-099-115 h1 115 4.7 lh1-099-200 h1 200 5.0 lh1-099-300 h1 300 5.5 standard length available and customized length on request.
technical data sheet draft micro rf cable assembly lh1-099-xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 4 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg technical data 15s202-1h1 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to 15k101-40m rf test switch material and plating connector parts material plating center contact spring bronze 0.15m au over 2-3m ni outer contact spring bronze 0.15m au over 2-3m ni cover spring bronze 0.15m au over 2-3m ni isolator tpx electrical data impedance 50 w frequency dc to 6 ghz return loss 3 -26 db, dc to 2 ghz 3 -23 db, 2 to 4 ghz 3 -18 db, 4 to 6 ghz insulation resistance 3 0.5 x10 3 m w center contact resistance 50 m w outer contact resistance 100 m w working voltage 4 v
technical data sheet draft micro rf cable assembly lh1-099-xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 3 / 4 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg mechanical data mating cycles 25 mating force 45 n unmating force 2n mated height 2.4 mm environmental data temperature range -40c to +90c storage temperature -40c to +90c rohs compliant cable load after mating do not apply higher forces than define d in the picture below. max. 2n max. 2n max. 4n
technical data sheet draft micro rf cable assembly lh1-099-xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 4 / 4 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg mating and un-mating for the reliable un-mating of the cable connector a special tool is dedicated: un-mating tool 15w003-000 usage remarks: 1. the vertical mating axis of the pcb receptacle and the cable connector has to be aligned during the connecting and a click will confirm that the connec tors are mated correctly. 2. the disconnection of the 2 connectors is carried ou t vertically with the tool 15w003-000 in the mating axis of the 2 connectors. 3. the connectors should not be mated under an extreme angle. 4. avoid the forcefull twisting or deforming of the ca ble. m i s a l i g n m e n t m a x . 5 packing lh1-099-100 20 pcs in plastic bag LH1-099-115 xx pcs in plastic bag lh1-099-200 xx pcs in plastic bag lh1-099-300 10 pcs in plastic bag draft date approved date rev. engineering change n umber name date georg lapper 17/09/13 c. kainzmaier 04.08.15 500 1 5-v417 m. sch?nsmaul 04.08.15 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
