technical data sheet rosenberger micro rf? cable assembly lh1-053-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlic h geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h available variants interface according to 15c102-40mx-nm, micro clamp technical data connector 15z202-1h1xx-nm all dimensions are in mm; tolerances according to i so 2768 m-h material and plating connector parts material plating center contact beryllium copper 3-6m ag over 0,2-1 m cu outer contact spring bronze aurodur?, gold plated isolator lcp type cable length a [mm] weight [g] packing [pcs in plastic bag] lh1-053-80-nm h1 (rtk013) 80 5 0.4 25 LH1-053-100-NM h1 (rtk013) 100 5 0.5 25 lh1-053-120-nm h1 (rtk013) 120 5 0.6 25 lh1-053-140-nm h1 (rtk013) 140 5 0.7 25 lh1-053-180-nm h1 (rtk013) 180 5 0.9 25 lh1-053-200-nm h1 (rtk013) 200 5 1.0 25 lh1-053-500-nm h1 (rtk013) 500 5 tbm 10
technical data sheet rosenberger micro rf? cable assembly lh1-053-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlic h geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 w frequency dc to 6 ghz return loss (over 2 assemblies) 3 -26 db, dc to 2 ghz 3 -26 db, 2 to 4 ghz 3 -17 db, 4 to 8 ghz insertion loss (over 2 assemblies) 1 db, dc to 2 ghz 2 db, 2 to 4 ghz 5 db, 4 to 8 ghz insulation resistance 3 0.5 x10 3 m w center contact resistance 100 m w outer contact resistance 50 m w mechanical data mating cycles 50 unmating force 6 n environmental data temperature range -40c to +90c storage temperature -40c to +90c rohs compliant suitable cables rtk 013 cable group h1 micro coax cable ?=1.37mm, c enter conductor ?=0.3mm connector are only sold with cable. standard length available and customized length on request. picture on data sheet show an assembly example minimum bending radius repeated 8x ?, single 4x ? draft date approved date rev. engineering change n umber name date f. michelmann 09.11.05 s.murr 08.06.2015 700 15-07 19 p. schroeder 08.06.15 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representat ion or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|