BYG22A-M3/hm3, byg22b-m 3/hm3, byg22d-m3/hm3 www.vishay.com vishay general semiconductor revision: 19-feb-15 1 document number: 89474 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast avalanche smd rectifier features ? low profile package ? ideal for automated placement ? glass passivated pellet chip junction ? low reverse current ? low forward voltage ? soft recovery characteristic ? ultra fast reverse recovery time ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. mechanical data case: do-214ac (sma) ? molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs-compliant, and commercial grade ? base p/nhm3 - halogen-free, rohs-compliant, and aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 2 whisker test, hm3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes the cathode end primary characteristics i f(av) 2.0 a v rrm 50 v, 100 v, 200 v i fsm 35 a i r 1.0 a v f 1.1 v t rr 25 ns e r 20 mj t j max. 150 c package do-214ac (sma) diode variatio ns single die do-214ac ( s ma) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol byg22a byg22b byg22d unit device marking code byg22a byg22b byg22d maximum repetitive peak reverse voltage v rrm 50 100 200 v average forward current i f(av) 2.0 a peak forward surge current 10 ms single half ? sine-wave superimposed on rated load i fsm 35 a pulse energy in avalanche mode, ? non repetitive (inducti ve load switch off) ? i (br)r = 1 a, t j = 25 c e r 20 mj operating junction and storage temperature range t j , t stg -55 to +150 c
BYG22A-M3/hm3, byg22b-m 3/hm3, byg22d-m3/hm3 www.vishay.com vishay general semiconductor revision: 19-feb-15 2 document number: 89474 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle ? notes (1) mounted on epoxy-glass hard tissue (2) mounted on epoxy-glass hard tissue, 50 mm 2 35 m cu (3) mounted on al-oxide-ceramic (al 2 o 3 ), 50 mm 2 35 m cu ? note (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol byg22a byg22b byg22d unit maximum instantaneous ? forward voltage i f = 1.0 a t j = 25 c v f (1) 1.0 v i f = 2.0 a 1.1 maximum reverse current v r = v rrm t j = 25 c i r 1 a t j = 100 c 10 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 25 ns thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol byg22a byg22b byg22d unit maximum thermal resistance , junction to lead, t l = const. r ? jl 25 c/w maximum thermal resistanc e, junction to ambient r ? ja (1) 150 c/w r ? ja (2) 125 r ? ja (3) 100 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode BYG22A-M3/tr 0.064 tr 1800 7" diameter plastic tape and reel BYG22A-M3/tr3 0.064 tr3 7500 13" di ameter plastic tape and reel byg22ahm3/tr (1) 0.064 tr 1800 7" diameter plastic tape and reel byg22ahm3/tr3 (1) 0.064 tr3 7500 13" diameter plastic tape and reel
BYG22A-M3/hm3, byg22b-m 3/hm3, byg22d-m3/hm3 www.vishay.com vishay general semiconductor revision: 19-feb-15 3 document number: 89474 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current vs. forward voltage fig. 2 - max. average forward current vs. ambient temperature fig. 3 - reverse current vs. junction temperature fig. 4 - max. reverse power diss ipation vs. junction temperature fig. 5 - diode capacitance vs. reverse voltage fig. 6 - max. reverse recove ry time vs. forward current 0.001 0.01 0.1 1 10 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1. 8 for w ard v oltage ( v ) for w ard c u rrent (a) t j = 150 c t j = 25 c 0 0.5 1.0 1.5 2.0 2.5 v r = v rrm half sine- w a v e am b ient temperat u re (c) a v erage for w ard c u rrent (a) 100 8 0 60 40 20 0 120 140 160 r ja 25 k/ w r ja 125 k/ w r ja 150 k/ w 1 10 100 25 50 75 100 125 150 re v erse c u rrent ( a) j u nction temperat u re ( c) v r = v rrm p r - limit at 100 % v r 0 10 20 30 40 50 25 50 75 100 125 150 re v erse po w er dissipation (m w ) j u nction temperat u re (c) v r = v rrm p r - limit at 8 0 % v r 0 10 20 30 40 50 60 70 0.1 1 10 100 f = 1 mhz re v erse v oltage ( v ) diode capac itance (pf) 0 0.2 0.4 0.6 0. 8 0 20 40 60 8 0 140 1.0 100 120 t a = 125 c i r = 0.5 a, i r = 0.125 a re v erse reco v ery time (ns) for w ard c u rrent (a) t a = 100 c t a = 75 c t a = 25 c t a = 50 c
BYG22A-M3/hm3, byg22b-m 3/hm3, byg22d-m3/hm3 www.vishay.com vishay general semiconductor revision: 19-feb-15 4 document number: 89474 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - max. reverse reco very charge vs. forward curr ent fig. 8 - thermal response package outline dimensions in inches (millimeters) t a = 125 c 0 0 10 20 30 40 60 0.2 0.4 0.6 0. 8 1.0 50 re v erse reco v ery charge (nc) for w ard c u rrent (a) i r = 0.5 a, i r = 0.125 a t a = 100 c t a = 75 c t a = 25 c t a = 50 c 1 10 100 1000 thermal resistance for p u lse cond. (k/ w ) p u lse length (s) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 single p u lse 125 k/ w dc t p /t = 0.5 t p /t = 0.2 t p /t = 0.1 t p /t = 0.02 t p /t = 0.05 t p /t = 0.01 0.008 (0.203) 0.194 (4.93) 0.208 (5.28) 0.157 (3.99) 0.177 (4.50) 0.100 (2.54) 0.110 (2.79) 0.078 (1.98) 0.090 (2.29) 0.006 (0.152) 0.012 (0.305) 0.049 (1.25) 0.065 (1.65) cathode band 0 (0) do-214ac ( s ma) mountin g pad layout 0.074 (1.88) max. 0.208 (5.28) ref. 0.066 (1.68) min. 0.060 (1.52) min. 0.030 (0.76) 0.060 (1.52)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
