photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) ? tt electronics plc issue c 05/2016 page 1 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. description: the opb760n , opb760t , opb770n and opb770t series of re ec ve assemblies feature photologic ? output. the electrical output can be speci ed as either ttl totem-pole or ttl open-collector, either of which can be supplied with inverter or bu ? er output polarity. opb760n and opb760t series devices are designed for pcboard moun ng and have 0.04? (10 mm) long leads. opb760t and opb770t series devices are designed for remote moun ng with two moun ng tabs. opb770nz and opb770tz series devices have 12? (305 mm) long, ul approved 26 awg wires. all devices in this series o ? er the added stability of a built-in hysteresis ampli er. custom electrical, wire and cabling and connectors are available. contact your local representa ve or optek for more informa on. applications: ? non-contact photologic? re?ective object sensor ? assembly line automation ? machine automation ? machine safety ? end of travel sensor ? door sensor features: ? choice of mounting con?gurations ? choice of four output con?gurations ? .040 (10.160 mm) pcboard mount (n and t series) ? 12 (304.800 mm) awg 26 wires (nz and tz series) opb760n opb775tz ordering information part number led peak wavelength sensor photologic? re?ection distance (inch) min / max mounting opb760n 890 nm totem-pole 0.080" / 0.220 pcboard .40 (10.160 mm) leads) opb761n open collector opb762n inv-totem-pole opb763n inv-open collector opb760t totem-pole opb761t open collector opb762t inv-totem-pole opb763t inv-open collector opb770nz totem-pole 12 (304.800 mm) 26 awg wire opb771nz open collector opb772nz inv-totem-pole opb773nz inv-open collector opb770tz totem-pole OPB771TZ open collector opb772tz inv-totem-pole opb773tz inv-open collector rohs
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 2 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com electrical speci?cations v cc out gnd v cc out gnd out gnd v cc out gnd v cc opb760, opb770 buffered totem-pole opb762, opb772 inverted totem-pole opb761, opb771 buffered open collector opb763, opb773 inverted open-collector
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 3 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com opb760 (n and t series) opb770 (nz and tz series) x = 0.08? [2.0mm] to 0.22? [5.6mm] dimensions are in: inches [ millimeters] color/pin# description red-4 anode black-5 cathode color/pin# white-1 blue-2 description v cc output green-3 ground pin # description 1 cathode 2 anode pin# 3 4 description ground output 5 v cc electrical speci?cations
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 4 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com electrical speci?cations absolute maximum ratings (t a =25c unless otherwise noted) supply voltage, v cc (not to exceed 3 seconds) 10 v storage temperature range -40 c to +85 c operating temperature range -40 c to +70 c lead soldering temperature (1/16 inch (1.6 mm) from case for 5 seconds with soldering iron) (1) 260 c input diode power dissipation (2) 100 mw output photologic? power dissipation (3) 200 mw total device power dissipation (4) 300 mw voltage at output lead (open collector output) 35 v diode forward dc current 40 ma diode reverse dc voltage 3 v electrical characteristics (t a = 25c unless otherwise noted) symbol parameter min typ max units test conditions input diode v f forward voltage - - 1.8 v i f = 40 ma, t a = 25 c i r reverse current - - 100 a v r = 2.0 v, t a = 25 c output photologic? sensor v cc operating dc supply voltage 4.75 - 5.25 v i ccl low level supply current: buffered totem-pole output (5)(6) buffered open-collector output (5)(6) - - - - 10 10 ma ma vcc = 5.25 v, if = 0 ma (output open) inverted totem-pole output (5) inverted open-collector output (5) - - - - 10 10 ma ma vcc = 5.25 v, if = 25 ma (output open) i cch high level supply current: buffered totem-pole output (5)(6) buffered open-collector output (5) - - - - 10 10 ma ma vcc = 5.25 v, if = 25 ma (output open) inverted totem-pole output (5)(6) inverted open-collector output (5)(6) - - - - 10 10 ma ma vcc = 5.25 v, if = 0 ma (output open) i oh high level output current: buffered open-collector output - - - - 100 100 a a vcc = 4.5 v, if = 25 ma, v oh = 30 v, t a =25c inverted open-collector output - - 100 a vcc = 4.5 v, if = 0 ma, v oh = 30 v, t a = 25c notes: (1) rma ?ux is recommended. duration can be exte nded to 10 seconds maximum when ?ow soldering. (2) derate linearly 2.22 mw/c above 25 c. (3) derate linearly 4.44 mw/c above 25 c. (4) derate linearly 6.66 mw/c above 25 c.normal applicat ion would be with light source blocked, simulated by i f =0 ma. (5) tested at d = 0.080 (mm) from a 90% diffuse white test surface. (6) normal application would be with light source blocked, simulated by i f = 0 ma. (7) all parameters tested using pulse technique.
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 5 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com notes: (1) tested at d = 0.080 (mm) from a 90% diffuse white test surface. (2) tested at d = 0.080 (mm), 0.150 (mm) an d 0.220 (mm) from a 90% diffuse white test surface. reference: eastman kodak, catalog #e 152 7795. (3) tested at d = 0.080 (mm), 0.150 (mm) and 0.22 0 (mm) from a 5% diffuse black test surface. (4) normal application would be with light source blocked, simulated by i f =0 ma. (5) opb760n through opb763n series devices are terminated with 0. 20 (mm) square leads designed for printed pcboard mounting. (6) opb770nz through opb773nz series devices are terminated with 12 inches (mm) of 7-strand 26 awg ul1429 insulated wire on each terminal. a standard amp no. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses. (7) opb760t through opb763t series devices are terminated wi th 0.020 (mm) square leads designed for printed pcboard mounting. (8) opb770tz through opb773tz series are terminated with 12 (mm) of 7-strand 26 awg ul1429 insulated wire on each terminal. a standard amp no. 640442-5 connector has been attached to the lead wires to ease conne ction to wire harnesses. (9) all parameters tested using pulse technique. electrical characteristics (t a = 25c unless otherwise noted) symbol parameter min typ max units test conditions output photologic? sensor (continued) i f(+) led positive-going threshold current (2) - - 25 ma vcc = 5 v, t a = 25 c i f(+) /i f(-) hysteresis (2) 1.1 - 2.0 - vcc = 5 v i os short circuit output current: buffered totem-pole output (1) -15 - -100 ma if = 25 ma, vcc = 5.25 v, output = grd inverted totem-pole output (1) -15 - -100 ma if = 0 ma, vcc = 5.25 v, output = grd v ol low level output voltage: buffered totem-pole output (1)(4) buffered open-collector output (1)(4) - - - - 0.4 0.4 v v v cc = 4.5 v, i ol = 12.8 ma, i f = 0 ma or i f = 30 ma inverted totem-pole output inverted open-collector output (1)(4) - - - - 0.4 0.4 v v v cc = 4.5 v, i ol = 12.8 ma, i f = 25 ma v oh high level output voltage: buffered totem-pole output (1) 2.4 - - v v cc = 4.5 v, i oh = -800 a, i f = 25 ma inverted totem-pole output (1)(4) 2.4 - - v v cc = 4.5 v, i oh = -800 a, i f = 0 ma inverted totem-pole output (3) inverted open-collector output (3) 2.4 2.4 - - - - v v v cc = 4.5 v, i oh = -800 a, i f = 30 ma electrical speci?cations
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 6 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com performance logic level vs distance 0 0 0 1 1 1 1 0.00.10.20.30.40.50.6 distance (inches) logic kodak 90% - towards kodak 90% - away logic level vs distance 0 0 0 1 1 1 1 0.00.10.20.30.40.50.6 distance (inches) logic copy paper - towards copy paper - awa y logic level vs distance 0 0 0 1 1 1 1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 distance (inches) logic kodak 19% - towards kodak 19% - away logic level vs distance 0 0 0 1 1 1 1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 distance (inches) logic avery labels - towards avery labels - away
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. photologic ? reflective object sensor opb760, opb761, opb762, opb763 (series n and t) opb770, opb771, opb772, opb773 (series nz and tz) issue c 05/2016 page 7 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com performance supply current vs ambient temperature 0 1 2 3 4 5 6 7 8 9 -40-20 0 20406080 ta -ambient temperature - (c) typical icc (ma) icch(ma) iccl(ma) typical trigger current and hysteresis ratio vs ambient temperature 0 2 4 6 8 10 12 14 -40-30-20-10 0 1020304050607080 ta - ambient temperature (c) i f (+), i f (-) and i f (+)/i f (-) - trigger current and hysteresis ratio if(+) ma if(-) ma hys output voltage vs ambient temperature 0 2 4 6 8 10 12 14 16 18 -40-20 0 20406080 ta -ambient temperature - (c) typical output voltage (v) voh (v) vol (v) logic level vs distance 0 0 0 1 1 1 1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 distance (inches) logic retro 3m 3870 - towards retro 3m 3870 - awa y
|
