.046 compliant pin typ. 84 plcs. tin plated see note 3 2. bag (2) m2 x 8 pan head phillips screw & (2) m2 hex nuts included with header 5. see sheet 2 for note. of nickel 3. header contact pins plated 30 min. microinches of gold over 100 min. microinches of nickel. the compliant pins plated 100-200 microinches of tin over 50 min. microi nches 6. see sheet 2 for note. 4. continuous max. carry current 5 amps dwg.no. rev description revisions date engr a do not scale drawing b c d a b c d 4 3 2 1 4 3 2 1 b notes: 1. for application use & care information consult v pc users guide @www.vpc.com j shand 9/9/2014 ecn #5477 10/12/2009 c inches dimensions are shown as: 510109204 sheet 1 of 2 rev provided. consult with virginia panel corporation e ngineering if more detail is required. 510109204 customer drawing www.vpc.com b module hdr 84 position 18117 cage code size virginia panel corporation 3:1 scale: or disclosed in whole or in part for any purpose ot her than to maintain the equipment and is submittedfor use by the customer only. the d ata shall not be duplicated, used, the information contained herein is the exclusive p roperty of virginia panel corporation [millimeters] rt ang comp pin 1.12 28.40 .59 14.86 3.12 .12 typ. .70 17.65 .10 2.54 .12 3.05 thru .09 2 plcs. typ. 2.38 46.86 1.85 .53 37.97 1.50 13.46 .05r 1.27 typ. 42.39 1.67 17.27 .68 .15 3.81 locator boss dim. @base typ. 2 plcs 1.85 .56 14.10 3.18 .13 .07 1.74 44.07 contact pins .025 [0.64] sq. posts gold plated see note 3
1 pcb layout and mounting compliant pin module header 84 positon right angle with complian t pin ab e df c 14 18117 a b c d a b c d 4 3 2 1 4 3 2 1 rev b 2 of 2 and is submitted for use by the customer only. the data shall not be duplicated, used, or 510109204 510109204 dwg.no. cage code sheet 2:1 scale: size c 5. for application use and care information consult vpc users guide @ www.vpc.com the information contained herein is the exclusive p roperty of virginia panel corporation disclosed in whole or in part for any purpose other than to maintain the equipment provided. do not scale drawing customer drawing - customer drawing - custome r drawing notes: 6. recommended pcb layout connector mounts this side board thickness = [1.57] .062 or [2.29] .090 dimension tolerance = .[.13].005 unless otherwise specified location optional screening and optional marking outline header perimeter b a c b a .006 c 13.41 .528 + 2 plcs. mounting boss unplated thru hole typ. .002 .072 0.05 2 plcs. unplated mounting screw typ. thru hole .100 .001- 0.05 3.12 3.76 .148 42.39 1.669 44.07 1.735 46.86 1.845 .002 .123 3.76 5.51 typ. .217 .148 .050r 0.97 1.09 (hasl) tin/lead plated typ. 84 plcs. plated thru hole .038 .043 1.300 33.02 13 eq. spcs@.100[2.54] 17.78 .700 both sides pad .002 .062 14.05 .002 .500 5 eq. spcs. @ .100 [2.54] 12.70 .553 .033 0.84 2 module layout for 310130101 receiver 1.950 49.53
|