specif cations the cb style capstick capacitor is constructed non-inductively with metallized polyester dielectric. the low inductance and low esr construction makes it ideal for high frequency switching power supplies. cb type capacitors can be used with pick and place assembly and the -fs parts are fully rohs compliant and capable of high temperature lead free soldering. type cb capstick high frequency switching power supply capacitor - low impedance construction - self healing - low esr/esl - flat surface for pick and place - surface mount - high ripple current/high capacitance capacitance range (at 1 khz) 0.47 f to 10 f capacitance tolerance standard: 10 % (k) voltage range 100, 500 vdc dissipation factor (at 1khz/+25 c) 1.0% insulation resistance 1,000 megohms x uf need not exceed 1,000 megohms test voltage for 100 vdc rating : 10 vdc test voltage for 500 vdc rating : 100 vdc dielectric strength 1.3 x rated vdc for 2 seconds max. self inductance (typical) cb4 : < 4 nh temperature range 100vdc: -55 c to +125 c (derate voltage 1.25% / c above +85 c) 500vdc: -55 c to +125c (no derating) life test apply 1.25 x the rated dc voltage for 1000 hours at +85 c. after the test, the capacitance, df, and ir will meet the following: capacitance change: 5.0% df: will meet the initial specif cation insulation resistance: will meet the initial specif cation moisture test subject the capacitor to +85 c / 85% rh for 21 days without voltage. after the test, the capacitance, df, and ir will meet the following: capacitance change : 7.0% df : will meet the initial specif cation insulation resistance: 30% of the initial limit long term stability after 2 years of storage in a standard environment. capacitance change: 2.0% vibration mil std 202 method 204d solder resistance -g : peak ref ow +220 c, 30 sec. -g-fa: peak ref ow +220 c, 30 sec. -g-fs: peak ref ow +245 c, 30 sec. capacitance change : 2.0% outline drawing cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 lead size gull wing leads l1 = .040 .020 l2 = .040 .010 t = .010 .005 w = .020 .005 pin to pin = .100 l length w width s l2 l1 t specif cations
ratings cde part number capacitance (f) dimensions (in.) dimensions (mm) # leads per side esr @ 500khz () w max. t max. l max. s .020 w max. t max. l max. s .51 100 vdc / 80 vac 405k100cb4g 4.0 0.500 0.250 0.450 0.400 12.7 6.3 11.4 10.16 3 0.007 475k100cb4g 4.7 0.500 0.250 0.525 0.400 12.7 6.3 13.3 10.16 3 0.006 106k100cb4g 10.0 0.500 0.250 0.995 0.400 12.7 6.3 25.3 10.16 7 0.003 405k100cb4g-fa 4.0 0.500 0.250 0.450 0.400 12.7 6.3 11.4 10.16 3 0.007 475k100cb4g-fa 4.7 0.500 0.250 0.525 0.400 12.7 6.3 13.3 10.16 3 0.006 106k100cb4g-fa 10.0 0.500 0.250 0.995 0.400 12.7 6.3 25.3 10.16 7 0.003 405k100cb4g-fs 4.0 0.500 0.350 0.525 0.400 12.7 8.89 13.3 10.16 3 0.007 475k100cb4g-fs 4.7 0.500 0.350 0.525 0.400 12.7 8.89 13.3 10.16 3 0.006 106k100cb4g-fs 10.0 0.500 0.350 0.995 0.400 12.7 8.89 25.3 10.16 7 0.003 500 vdc / 250 vac 474K500CB6G-FS 0.47 0.700 0.460 0.625 0.600 17.78 11.68 15.88 15.24 4 0.011 type cb capstick high frequency switching power supply capacitor cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 part numbering system 405 k 100 cb 4g -fa -ct capacitance tolerance voltage type case size rohs indicates cut-tape 405 = 4.0 f k = 10% 100 = 100 vdc 4 = 0.4 lead spacing -fa = 6/6 compliant w sn plated lead frame -fs = 6/6 compliant w sn plated lead frame (high temp. soldering) (blank = 5/6 compliant w snpb lead frame fnish) maximum rms voltage vs frequency f vdc 1khz 10khz 100khz 500khz 1mhz 0.047 500 250 64 13.1 4.2 2.4 4.0 100 35 18 4.2 1 0.4 4.7 100 35 18 3.7 0.8 0.3 10.0 100 35 18 2.2 0.5 0.3 maximum rms current (amps) vs frequency f vdc 1khz 10khz 100khz 500khz 1mhz 0.047 500 0.8 1.9 3.9 6.2 7.1 4.0 100 1.9 4.2 10.2 11.5 12.0 4.7 100 2.0 4.5 10.8 12.2 12.6 10.0 100 4.3 9.9 14.1 15.3 15.6 type cb performance characteristics (-55 oc to +85 oc) * highlighted items stocked in cut-tape quantities 10 pcs mults.
type cb capstick high frequency switching power supply capacitor cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 part number a (in.) a (mm) # of leads per side 405k100cb4g, -fa, -fs 0.365" 9.27 3 475k100cb4g, -fa, -fs 0.365" 9.27 3 106k100cb4g, -fa, -fs 0.365" 9.27 7 474K500CB6G-FS 0.565" 14.35 4 land pattern construction non-inductive metallized polyester dielectric (pet) with aluminum metallization. case is ul94v-0 rated premolded shell. lead frame is tinned cu alloy. -g: snpb leadframe fnish -g-fa: sn leadframe fnish -g-fs: sn leadframe fnish packaging tape and reel. 13 reel with 250pcs/reel. dry packed with desiccant in moisture barrier bag. ipc/jedec j-std-20 msl 4. markings logo, type, capacitance code, tolerance code, voltage, and date code. soldering pre-conditioning: if needed, in packaging at +50 c for 48 hours, or out of packaging at +85 c for 12 hours at < 5%rh. solder paste thickness: 8 to 10 mils. refow soldering: ramp up rate: 3 c/second max. ( -g and -g-fa) preheat : 100 c to 150 c for 60 to 120 seconds soldering time: maximum of 90 seconds at or above +183 c peak refow temperature: 220 c time within 5 c of peak: 30 seconds time from +25 c to peak: 360 seconds ( -g-fs) preheat: 150 c to 200 c for 60 to 180 seconds soldering time: maximum of 90 seconds at or above +217 c peak refow temperature: 245 c time within 5 c of peak: 30 seconds time from +25 c to peak: 480 seconds ramp down rate: 6 c/second max. note: all left side capacitor leads are joined in common internal to the capacitor and all right side capacitor leads are also joined in common internal to the capacitor right left right left 0.110 0.110 0.100 0.040 - 0.060
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required.
|
