high efficiency, class a, 1 watt amplifier 10 to 500 mhz technical data uto/utc-565 features ? 1 watt output power ? low current: 450 ma ? high gain: 19.5 db typ ? 18 volt bias ? guaranteed performance -55 to 85 c ? hermetic to-3 package ? sma connectored case option applications ? uhf/vhf transmitters ? communication circuits ? mobile radio ? bench top ? radar systems ? ecm systems description the uto/utc-565 is a high gain, high efficiency, class a, 1 watt amplifier, designed to provide broadband power for a wide variety of applications. the amplifier uses all silicon bipolar transistors to provide ultra reliable performance over the full military temperature range. applications include bench top test sets, transmitter driver and output stages, and other applica- tions that require high intercept points. inputs and outputs are matched to 50 w for easy integra- tion into new and existing sys- tems. available packaging for this unit is a hermetic to-3 or the connectorized ucs-1p case. pin configuration utoto-3 v ground (case) rf out rf in + ground utcucs-1p rf v + in rf out maximum ratings parameter maximum dc voltage +20 volts continuous rf power (cw or pulse) +17 dbm operating case temperature range uto/utc -55 to +85 c storage temperature -62 to +150 c r series burn-in temperature (t c ) +85 c schematic rf in
rf out
v +
thermal characteristics 1 q jc 45 c/w, 45 c/w 2 active transistor power dissipation 1.1 w, 1.3 w 2 junction temperature above case temperature 50 c, 59 c 2 notes: 1. values refer to first and second stages, respectively. weight: (typical) uto 14.5 grams; utc 281 grams
2 electrical specifications (measured in 50 w system, v cc = +18 v unless otherwise noted) symbol unit t c = -55 to +85 c 1 10-500 17 1.0 12.5 +26.5 2.0 2.0 ? ? ? ? ? mhz db db db dbm ? ? dbm dbm dbm ma dbc/hz t c = 0 to 50 c guaranteed specifications typical t c = 25 c 10-500 19.5 0.3 8 +30.5 1.3 1.3 +41 +51.0 +57.0 450 -165 10-500 17.5 0.7 11.5 +28 2.0 2.0 ? ? ? ? ? frequency range small signal gain (min.) gain flatness (max.) noise figure (max.) power output @ +1 db comp. (min.) input vswr (max.) output vswr (max.) two tone 3rd order intercept point two tone 2nd order intercept point one tone 2nd harmonic intercept pt. dc current phase noise @ 500 mhz; 1 khz offset bw gp ? nf p 1db vswr vswr ip 3 ip 2 hp 2 i d ? characteristic note 1: uto version only typical performance over temperature (@ +18 vdc unless otherwise noted) key: +25 c +85 c -55 c noise figure nf, db 11
10
9
8
7
6 frequency, mhz 10 100 200 300 400 600 500 800 700 output vswr vswr 2.0
1.8
1.6
1.4
1.2
1.0 frequency, mhz 10 100 200 300 400 600 500 800 700 input vswr vswr 2.0
1.8
1.6
1.4
1.2
1.0 frequency, mhz 10 100 200 300 400 600 500 800 700 ip 3 ip 3 , dbm 55
50
45
40
35
30 frequency, mhz 0 100 200 300 400 600 500 800 700 ip 2 ip 2 , dbm 80
70
60
50
40
30 frequency, mhz 10 100 200 300 400 600 500 800 700 hp 2 hp 2 , dbm 90
80
70
60
50
40 frequency, mhz 10 100 200 300 400 600 500 800 700 typical phase noise
@ 500 mhz log (f), dbc/hz -140
-150
-160
-170
-180
-190 fourier frequency, hz 1 10 100 10000 1000 100000 gain gain, db 22
20
18
16
14
12 frequency, mhz 10 100 200 300 400 600 500 800 700 output power po-1, dbm 33
32
31
30
29
28
27
26 frequency, mhz 10 100 200 300 400 600 500 800 700
3 automatic network analyzer measurements (typical production unit @ +25 c ambient) separameters and numerical readings bias = 18.00 volts freq. mhz 1.0 .58 -43.0 -5.46 -174.3 -34.87 -12.5 .90 -84.2 139.83 ? 2.0 .58 -95.2 16.50 134.4 -34.57 160.3 .48 -170.3 139.83 ? 3.0 .34 -125.2 18.85 83.3 -33.77 95.6 .18 160.4 142.43 ? 5.0 .18 -144.4 19.34 46.4 -33.75 53.3 .08 -175.7 51.34 ? 10.0 .11 -161.0 19.44 20.4 -33.69 25.7 .09 -166.0 14.46 12.50 20.0 .10 -173.5 19.51 5.4 -33.62 12.0 .10 -173.4 4.17 1.50 30.0 .09 -179.1 19.57 -2.0 -33.54 7.0 .10 -177.8 2.05 -1.88 50.0 .08 175.1 19.64 -12.3 -33.45 1.5 .11 176.5 1.44 -4.22 100.0 .08 168.4 19.73 -32.9 -33.31 -5.9 .10 166.3 1.15 -4.87 150.0 .07 165.3 19.76 -52.0 -33.16 -11.9 .10 157.0 1.06 04.03 200.0 .07 162.7 19.76 -70.6 -33.01 -17.7 .10 147.4 1.04 -2.75 250.0 .07 158.9 19.76 -89.1 -32.85 -23.4 .09 137.0 1.03 -1.34 300.0 .07 154.7 19.78 -107.7 -32.65 -29.4 .08 126.1 1.03 .05 350.0 .07 150.5 19.82 -126.4 -32.50 -35.9 .07 114.7 1.04 1.22 400.0 .06 147.0 19.88 -145.8 -32.32 -42.3 .06 104.8 1.07 1.81 450.0 .06 147.8 19.94 -165.9 -32.15 -49.1 .04 102.9 1.12 1.65 500.0 .05 159.6 19.94 172.9 -31.93 -55.9 .04 123.7 1.18 .36 550.0 .07 176.1 19.77 150.6 -31.65 -62.9 .06 140.1 1.24 ? 600.0 .10 177.2 19.34 127.6 -31.29 -70.8 .10 129.3 1.28 ? 700.0 .20 152.5 17.59 83.3 -30.60 -91.3 .21 87.4 ? ? 800.0 .30 122.7 15.32 45.0 -30.86 -116.9 .32 47.2 ? ? 900.0 .40 96.7 13.31 10.7 -32.15 -137.3 .42 14.0 ? ? 1000.0 .53 73.0 11.62 -24.2 -34.38 -154.1 .49 -10.8 ? ? 1200.0 .82 21.1 6.80 -99.9 -33.54 -161.0 .65 -44.2 ? ? 1400.0 .89 -20.0 -.03 -159.9 -33.18 157.0 .79 -73.5 ? ? 1600.0 .91 -46.2 -7.00 153.7 -36.00 124.3 .86 -94.1 ? ? s 11 mag ang phase dev (deg) gpdel (ns) s 21 db ang s 12 db ang s 22 mag ang linearization range: 10 to 500 mhz uto e 509r screening option
blank = no screening
r = r-series screening
for more information on r-series screening,
see reliability screening, pub. 5963-3240e. model number prefix
uto-
utm-
ppa- model number utc e 509-1 connector option
for tc-1 case the only connector option
available is the -1. the -1 option consists
of a sma female connector on both the
input and output (see note). model number prefix
utc- model number note: r-series screening is not available in the tc-1 case as the case is non-hermetic. product options
case drawings to-3 v 40
typ 1.187 1.000 .593 ground
(case) rf .175r typ..155 dia.
(2x) 80
typ .22 min 1.537 .910
dia .765
dia .040
pin dia .090 .355 max out rf in + approximate weight 14.5 grams v control or ground 60
typ .100 dia glass ring (typ)
4 plcs on .500 dia
pin circle notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010 3. the connector option available for the ucs-1p case is the -1, sma female connectors at both input and output ports. notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010 .375 sma jack (female) (2) pl 2.5 max .754 2.125 .610 1.050 1.86 .785 .485 3.20 .110 .187 .125 thru holes (4 plcs) 2.02 rf in rf out v+ ground approximate weight 281 grams 1.69 ucs-1p contact teledyne microwave solutions: 650-691-9800 650-962-6845 fax check for updates: www.teledynemicrowave.com
|
