vs-hfa16pa60cpbf, VS-HFA16PA60C-N3 www.vishay.com vishay semiconductors revision: 10-jul-15 1 document number: 94056 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hexfred ? ultrafast soft recovery diode, 2 x 8 a features ? ultrafast and ultrasoft recovery ? very low i rrm and q rr ? designed and qualified according to jedec ? -jesd47 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 benefits ? reduced rfi and emi ? reduced power loss in diode and switching transistor ? higher frequency operation ? reduced snubbing ? reduced parts count description vs-hfa16pa60c... is a state of the art center tap ultrafast recovery diode. employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. with basi c ratings of 600 v and 8 a per leg continuous current, the vs-hfa16pa60c... is especially well suited for use as the companion diode for igbts and mosfets. in addition to ultrafast recovery time, the hexfred ? product line features extremely low values of peak recovery current (i rrm ) and does not exhibit any tendency to snap-off during the t b portion of recovery. the hexfred features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. these hexfred advantages can help to significantly reduce snubbing, component count and heatsink sizes. the hexfred vs-hfa16pa60c... is ideally suited for applications in power supp lies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. product summary package to-247ac i f(av) 2 x 8 a v r 600 v v f at i f 1.4 v t rr typ. 18 ns t j max. 150 c diode variation common cathode to-247ac 1 2 3 base common cathode common cathode 2 2 13 anode 1 anode 2 available absolute maximum ratings parameter symbol test conditions values units cathode to anode voltage v r 600 v maximum continuous forward current per leg i f t c = 100 c 8 a per device 16 single pulse forward current i fsm 60 maximum repetitive forward current i frm 24 maximum power dissipation p d t c = 25 c 36 w t c = 100 c 14 operating junction and storage temperature range t j , t stg -55 to +150 c
vs-hfa16pa60cpbf, VS-HFA16PA60C-N3 www.vishay.com vishay semiconductors revision: 10-jul-15 2 document number: 94056 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications per leg (t j = 25 c unless otherwise specified) parameter symbol test condition s min. typ. max. units cathode to anode breakdown voltage v br i r = 100 a 600 - - v maximum forward voltage v fm i f = 8.0 a see fig. 1 -1.41.7 i f = 16 a - 1.7 2.1 i f = 8.0 a, t j = 125 c - 1.4 1.7 maximum reverse leakage current i rm v r = v r rated see fig. 2 -0.35.0 a t j = 125 c, v r = 0.8 x v r rated - 100 500 junction capacitance c t v r = 200 v see fig. 3 - 10 25 pf series inductance l s measured lead to lead 5 mm from package body - 8.0 - nh dynamic recovery characteristics per leg (t j = 25 c unless otherwise specified) parameter symbol test condition s min. typ. max. units reverse recovery time see fig. 5, 6 and 16 t rr i f = 1.0 a, di f /dt = 200 a/s, v r = 30 v - 18 - ns t rr1 t j = 25 c i f = 8.0 a di f /dt = 200 a/s v r = 200 v -3755 t rr2 t j = 125 c - 55 90 peak recovery current see fig. 7 and 8 i rrm1 t j = 25 c - 3.5 5.0 a i rrm2 t j = 125 c - 4.5 8.0 reverse recovery charge see fig. 9 and 10 q rr1 t j = 25 c - 65 138 nc q rr2 t j = 125 c - 124 360 peak rate of fall recovery current during t b see fig. 11 and 12 di (rec)m /dt1 t j = 25 c - 240 - a/s di (rec)m /dt2 t j = 125 c - 210 - thermal - mechanical specifications parameter symbol test conditions min. typ. max. units lead temperature t lead 0.063" from case (1.6 mm) for 10 s - - 300 c junction to case, single leg conducting r thjc --3.5 k/w junction to case, both leg conducting - - 1.75 thermal resistance, junction to ambient r thja typical socket mount - - 40 thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased - 0.25 - weight -6.0- g -0.21- oz. mounting torque 6.0 (5.0) - 12 (10) kgf cm (lbf in) marking device case style to-247ac (jedec) hfa16pa60c
vs-hfa16pa60cpbf, VS-HFA16PA60C-N3 www.vishay.com vishay semiconductors revision: 10-jul-15 3 document number: 94056 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - maximum forward voltage drop vs. instantaneous forward current (per leg) fig. 2 - typical reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 94056_01 v fm - forward voltage drop (v) 0.4 0.1 10 100 1.2 1.6 2.0 2.8 2.4 i f - instantaneous forward current (a) t j = 150 c t j = 125 c t j = 25 c 1 3.2 0.8 0 v r - reverse voltage (v) i r - reverse current (a) 100 0.01 0.001 94056_02 0.1 1 10 100 400 1000 600 200 300 500 t j = 150 c t j = 125 c t j = 25 c 100 10 100 1000 10 v r - reverse voltage (v) c t - junction capacitance (pf) 94056_03 t j = 25 c 1 1 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal response 0.01 94056_04 single pulse (thermal response) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c 2 t 1 t p dm
vs-hfa16pa60cpbf, VS-HFA16PA60C-N3 www.vishay.com vishay semiconductors revision: 10-jul-15 4 document number: 94056 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical reverse recovery time vs. di f /dt (per leg) fig. 6 - typical recovery current vs. di f /dt (per leg) fig. 7 - typical stored charge vs. di f /dt (per leg) fig. 8 - typical di (rec)m /dt vs. di f /dt (per leg) fig. 9 - reverse recovery parameter test circuit 0 100 1000 di f /dt (a/s) t rr (ns) 20 60 40 80 94056_05 i f = 16 a i f = 8.0 a i f = 4.0 a v r = 200 v t j = 125 c t j = 25 c 0 100 1000 di f /dt (a/s) i rr (a) 4 12 8 16 94056_06 20 v r = 200 v t j = 125 c t j = 25 c i f = 16 a i f = 8.0 a i f = 4.0 a 0 100 1000 di f /dt (a/s) q rr (nc) 100 300 200 400 94056_07 v r = 200 v t j = 125 c t j = 25 c 500 i f = 16 a i f = 8.0 a i f = 4.0 a 0 100 1000 di f /dt (a/s) q rr (nc) 100 300 200 400 94056_07 v r = 200 v t j = 125 c t j = 25 c 500 i f = 16 a i f = 8.0 a i f = 4.0 a irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t
vs-hfa16pa60cpbf, VS-HFA16PA60C-N3 www.vishay.com vishay semiconductors revision: 10-jul-15 5 document number: 94056 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 10 - reverse recovery waveform and definitions ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-hfa16pa60cpbf 25 500 antistatic plastic tube VS-HFA16PA60C-N3 25 500 antistatic plastic tube links to related documents dimensions www.vishay.com/doc?95542 part marking information to-247acpbf www.vishay.com/doc?95226 to-247ac-n3 www.vishay.com/doc?95007 q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve defined by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr 1 - vishay semiconductors product 2 - hexfred ? family 3 - electron irradiated 4 - current rating (16 = 16 a) 5 - pa = to-247ac device code 5 1 3 2 4 6 7 8 hf vs- a 16 pa 60 pbf c 6 7 - circuit configuration - voltage rating: (60 = 600 v) c = common cathode 8 - environmental digit: pbf = lead (pb)-free and rohs-compliant -n3 = halogen-free, rohs-compliant, and totally lead (pb)-free
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95542 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f dimensions in millimeters and inches notes (1) dimensioning and tolerancing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) p (datum b) p1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
