u30xct-e3, ub30xct-e3 www.vishay.com vishay general semiconductor revision: 30-oct-13 1 document number: 89015 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual common cathode ultrafast plastic rectifier features ? power pack ? oxide planar chip junction ? ultrafast recovery time ? soft recovery characteristics ? low switching losses, high efficiency ? high forward surge capability ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath temperature 275 c maximum, 10 s per jesd 22-b106 (for to-220ab package) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in low voltage, high frequency rectifier of switching power supplies, freewheeling di odes, dc/dc converters or polarity protection specifically for ccm application. mechanical data case: to-220ab and to-263ab molding compound meets ul 94v-0 flammab ility rating base p/n-e3 - rohs-co mpliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 ? e3 suffix meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs max. primary characteristics i f(av) 2 x 15 a v rrm 100 v to 200 v i fsm 160 a trr 17 ns v f at i f = 15 a 0.892 v t j max. 150 c package to-220ab, to-263ab diode variations dual common cathode to-220ab 1 2 3 1 2 k to-263ab case pin 2 pin 1 pin 3 u30xct ub30xct k pin 1 pin 2 heatsink maximum ratings (t c = 25 c unless otherwise noted) parameter symbol u(b)30bct u(b)30cct u(b)30dct unit max. repetitive peak reverse voltage v rrm 100 150 200 v max. average forward rectified current (fig. 1) total device i f(av) 30 a per diode 15 peak forward surge current single half sine-wave ? superimposed on ra ted load per diode 8.3 ms i fsm 160 a 10 ms 150 electrostatic discharg e capacitor voltage, ? human body model: c = 150 pf, r = 1.5 k ? (contact mode) v c 8kv operating junction and storage temperature range t j , t stg -55 to +150 c
u30xct-e3, ub30xct-e3 www.vishay.com vishay general semiconductor revision: 30-oct-13 2 document number: 89015 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms ? ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - max. forward current derating curve fig. 2 - forward power loss characteristics per diode electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage per diode (1) i f = 7.5 a t j = 25 c v f 0.875 - v i f = 15 a 0.964 1.05 i f = 7.5 a t j = 100 c 0.800 - i f = 15 a 0.892 0.95 reverse current per diode (2) rated v r t j = 25 c i r 1.3 20 a t j = 100 c 200 600 reverse recovery time per diode i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 17 25 ns reverse recovery time per diode i f = 15 a, di/dt = 200 a/s, ? v r = 200 v, i rr = 0.1 i rm t rr 36 45 ns stored charge per diode q rr 110 - nc forward recovery time per diode i f = 15 a, di/dt = 120 a/s, ? v f = 1.1 x v f max. t fr 175 - ns peak forward voltage per diode v fp 3.1 - v thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol u30xct ub30xct unit typical thermal resistance per diode r ? jc 2.4 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab u30dct-e3/4w 1.87 4w 50/tube tube to-263ab UB30DCT-E3/4w 1.37 4w 50/tube tube to-263ab UB30DCT-E3/8w 1.37 8w 800/reel tape and reel 20 15 25 30 35 10 5 0 0 25 50 75 100 125 150 average forward cu rrent (a) case temperature (c) u30xct ub30xct resistive or inductive load 12 14 16 18 10 8 6 4 2 0 0 2 4 6 8 1012141618 average power loss (w) average forward current (a) d = 0.1 d = 0.3 d = 0.5 d = 0.8 d = 1.0 d = 0.2 d = t p /t t p t
u30xct-e3, ub30xct-e3 www.vishay.com vishay general semiconductor revision: 30-oct-13 3 document number: 89015 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse characteristics per diode fig. 5 - typical junction capacitance per diode fig. 6 - typical junction capacitance per diode 100 10 1 0.1 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 instantaneous forward voltage (v) instantaneous forward current (a) t j = 50 c t j = 75 c t j = 100 c t j = 125 c 1000 100 10 10 20 30 40 50 60 70 80 90 100 1 percent of rated peak reverse voltage (%) instantaneous reverse current (a) t j = 50 c t j = 125 c t j = 100 c t j = 75 c 100 10 0.1 1 10 100 reverse voltage (v) junction capaci tance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mvp-p 100 0.1 1 0.1 0.01 0.001 1 10 100 t - pulse duration (s) transient thermal imped ance ( c/w)
u30xct-e3, ub30xct-e3 www.vishay.com vishay general semiconductor revision: 30-oct-13 4 document number: 89015 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pi n 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) to-263ab mounting pad layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) mi n . 0.15 (3.81) mi n . 0.33 (8.38) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) mi n .
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
