View 152-005-5-12_8957247.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

april 2017 mil-dtl-5 5116 radio connectors and cables industry-standard qpl solutions plus hiper 55116 mcots versions with superior electrical, environmental, and mechanical performance qpl and high-performance mcots series 152 hiper 55116 with emi ground spring tactical interconnect solutions
t he mil-dtl -55116 audio frequency connector has been used in tactical radio systems for generations. now, this reliable, feld-cleanable interconnect has been specifed for use in the joint tactical radio systemthe next generation voice and data radio for u.s. military feld operations, ensuring its continued use and service to soldiers, sailors and airmen. glenair manufactures two versions of the mil-dtl-55116 connector: a standard-performance qpl solution, and an intermateable advanced-performance mcots derivative with: ? low contact resistance: less than 10 milliohms ? integrated emi ground spring provides improved 2.5 milliohm shell-to-shell conductivity performance ? ip68 rated sealing in mated and unmated condition ? 1,000 hour+ salt spray corrosion resistance ? integrated cable shield termination band porch ? superior 100 pound cable pull test rating series 151 and 152 series 151 (mil-dtl-55116 qpl standard- duty) and series 152 (high-performance) tactical radio connectors qpl standard and high- performance mcots for more information contact glenair at 818-247-6000 or visit our website at www.glenair.com u.s. cage code 06324
1 series 151 and 152 mil-dtl- 55116 radio connectors and cables selection guide series 152 hiper 55116 audio connectors ? pg. 2 152-002 hiper 55116 audio plug 157-010 hiper 55116 crimp-removable contact audio plug 152-005 hiper 55116 overmolded audio plug cordset 152-001 hiper 55116 audio plug with wire strain relief 157-009 hiper 55116 crimp-removable contact audio plug with wire strain relief 152-006 hiper 55116 audio plug cordset 152-004 hiper 55116 in-line audio receptacle 157-011 hiper 55116 crimp- removable contact in-line audio receptacle 152-007 hiper 55116 overmolded in-line audio receptacle cordset 152-003 hiper 55116 radio-mount jam nut audio receptacle 152-013 hiper 55116 audio receptacle with pc tails 152-012 hiper 55116 audio receptacle with pc tails and 3 ground pins 240-152-003 hiper 55116 fltered radio- mount jam nut audio receptacle, solder cups 240-152-013 hiper 55116 fltered radio- mount jam nut audio receptacle, pc tails series 151 standard mil-dtl-55116 qpl audio connectors ? pg. 18 151-001 mil-dtl-55116 qpl audio plug with wire strain relief 151-002 mil-dtl-55116 qpl audio plug with overmold adapter 151-003 mil-dtl-55116 qpl radio-mount jam nut audio receptacle 151-004 mil-dtl-55116 qpl in-line audio receptacle with wire strain relief 657-098 dummy receptacle for series 151 and 152 plugs 664-374 and 667-355 protective covers for series 151 and 152 connectors 151-008 rubber protective cover for series 151 and 152 receptacles series 151 mil-dtl-55116 type special connectors, adapters, and accessories ? pg. 24 151-015 mil- dtl-55116 type all-metal audio plug with wire strain relief 157-008 mil- dtl-55116 type audio plug with integral confgurable 90 backshell 151-005 mil- dtl-55116 type audio receptacle with pc tails 151-010 mil- dtl-55116 type audio receptacle with pc tails and 3 ground pins 157-005 audio connector feed-thru adapter, 55116 to d38999 157-012 audio connector feed-thru adapter, 55116 to mighty mouse 804 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
2 hiper 55116 tactical radio connectors and cables series 152 ? ? intermateable and interoperable with standard mil-dtl-55116 connectors ? ? low contact resistance: less than 10 milliohms ? ? integrated emi ground spring provides improved 2.5 milliohm shell-to-shell conductivity performance ? ? ip68 rated sealing in mated and unmated condition, prevents water ingress into radio equipment ? ? 1,000 hour+ salt spray corrosion resistance ? ? integrated cable shield termination band porch ? ? superior 100 pound cable pull test rating series 152 hiper 55116 connectors offer signifcant performance advantages for modern soldier communication systems integrated emi ground spring 1000 hour+ salt spray corrosion-resistant fully intermateable and interoperable with mil-dtl-55116 connectors integrated banding porch/shrink boot groove <10 mf contact resistance ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324
3 series 152 intermateable h iper 55116 radio connectors and cables selection guide ? performance specifcations series 152 hiper 55116 performance specifications complies with all mil-dtl-55116 specifcations and exceeds the following performance criteria: shell-to-shell conductivity 152-001 and -002 plugs: 2.5 milliohms max. 152-003 receptacle: 2.5 milliohms max when mated to glenair hiper 55116 plug 152-001 or -002 cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. water immersion (mated & un-mated): 152-002 plug, 152-003 receptacle: ip68 (10 meters standing water/1 hr.) air pressure: 15 psi salt spray: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 152-001 and -002 plugs: 100 lbs. (cable shield strength dependent) series 152 hi per 55116 selection guide part description glenair p/n corresponding mil p/n, u designator mates with page audio plug, feld serviceable, with wire strain relief and rigid contacts, crimp and solder cup 152-001 m55116/1 C /4 type u-229 152-003 hiper 55116 type jam nut receptacle 152-004 hiper 55116 type in-line receptacle 151-003 standard 55116 type jam nut receptacle 151-004 standard 55116 type in-line receptacle any m55116 receptacle 4 crimp-removable contact audio plug, feld- serviceable with wire strain relief 157-009 5 overmolded audio plug cordset with wire strain relief 152-006 6 audio plug with shield termination porch, overmolding adapter and rigid contacts, crimp and solder cup 152-002 m55116/5 C /8 type u-182 152-003 hiper 55116 type jam nut receptacle 152-004 hiper 55116 type in-line receptacle 151-003 standard 55116 type jam nut receptacle 151-004 standard 55116 type in-line receptacle any m55116 receptacle 7 crimp-removable contact audio plug with shield termination porch and overmolding adapter 157-010 8 overmolded audio plug cordset 152-005 9 in-line receptacle with shield termination porch, overmolding adapter, and non- rigid spring contacts, crimp and solder cup 152-004 m55116/11 C /14 type u-228 152-003 hiper 55116 type jam nut receptacle 152-004 hiper 55116 type in-line receptacle 151-003 standard 55116 type jam nut receptacle 151-004 standard 55116 type in-line receptacle any m55116 receptacle 10 crimp-removable contact in-line audio receptacle, shield termination porch and overmolding adapter 157-011 11 overmolded in-line audio receptacle cordset 152-007 12 radio-mount jam nut audio receptacle with non-rigid spring contacts 152-003 m55116/9 C /10 type u-183 152-001 hiper 55116 type plug 152-002 hiper 55116 type plug 151-001 standard 55116 type plug 151-002 standard 55116 type plug any m55116 plug 13 radio-mount jam nut audio receptacle with pc tails 152-013 14 radio-mount jam nut audio receptacle with pc tails and 3 ground pins 152-012 15 filtered radio-mount jam nut audio receptacle with non-rigid spring contacts, solder cup 240-152-003 16 filtered radio-mount jam nut audio receptacle with pc tails 240-152-013 17 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
4 hiper 55116 audio plug with wire strain relief 152-001 ground/emi spring (360 coverage) ? .836 .826 .750 flats .625 hex (2.310) .730 .720 (.250) (1.200) 1.018 48 how to order sample part number 152-001 -1 -3 series hiper 55116 audio plug with wire strain relief connector confguration (see table i) -1 = 5 pin, crimp -2 = 6 pin, crimp -3 = 5 pin, solder cup -4 = 6 pin, solder cup size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber other metals: aluminum alloy 6061 t6/hard anodized (dark gray) strain relief spring: steel corrosion resistant wire/chemical blackening contacts: copper alloy/gold plate notes plugs are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip67 (1 meter of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) table i: connector confguration 5 contacts 6 contacts 152-001-1 m55116/1 type (u-229) plug, 5 crimp sleeve terminals 152-001-2 m55116/2 type (u-229) plug, 6 crimp sleeve terminals 152-001-3 m55116/3 type (u-229) plug, 5 solder cup contacts 152-001-4 m55116/4 type (u-229) plug, 6 solder cup contacts composite version also available 152-014 (3.718) 2.638 max 1.080 48 1.018 .730 .720 .748 flats ? .836 .826 audio plug, composite thermoplastic, with ip67 watertight strain relief and crimp terminal or solder cup contacts consult factory for details audio plug, field-serviceable with wire strain relief and rigid crimp terminal or solder cup contacts mates with 152-003 and 152-004, 151-003 and 151-004, and standard mil-dtl-55116 receptacles integrated emi ground spring spring coil strain relief (user-serviceable) ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
5 hiper 55116 audio plug with wire strain relief, crimp-removable contacts 157-009 (2.410) .820 .790 (.250) (1.200) ? .836 .826 .625 hex .750 flats contact retainer disc crimp removable pin contact 48 1.018 ground/emi spring (360 coverage) contact retainer disc crimp-removable pin contact how to order sample part number 157-009 -1 -3 series hiper 55116 audio plug with wire strain relief connector confguration (see table i) -1 = 5 pin, crimp-removable contacts -2 = 6 pin, crimp-removable contacts size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber other metals: aluminum alloy 6061 t6/hard anodized (dark gray) strain relief spring: steel corrosion resistant wire/chemical blackening contacts: copper alloy/gold plate notes plugs are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip67 (1 meter of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) crimp-removable pin contacts and contact retainer disc are supplied loose. contact glenair for the crimp tool and locator. table i: connector confguration 5 contacts 6 contacts 157-009-1 m55116/1 type (u-229) plug, 5 crimp-removable contacts 157-009-2 m55116/2 type (u-229) plug, 6 crimp-removable contacts audio plug, field-serviceable with wire strain relief and crimp-removable contacts mates with 152-003 and 152-00, 151-003 and 151-00, and standard mil-dtl-55116 receptacles tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
6 hiper 55116 audio plug cordset with wire strain relief 152-006 5-pin connector features only a-e brn blk a b c wiring diagram p1 red 22 awg 22 awg 22 awg conductors per, m22759/11 braid per, glenair part no. 100-001a d e f orn yel grn22 awg 22 awg 22 awg tolerance is: (+1.80/-0.00) for "l" less than 60.00 inches. (+3%/-0.00) for "l" greater than 60.00 inches. 6-pin shown for refernce only glenair "part number" yyww 06324 overall length (see part number development) brady label lat-18 or eq. cable jacket, polyurethane conductive braid for emi shielding capability glenair connector, 152-001 p1 how to order sample part number 152-006 -6 -xx series hiper 55116 cordset with wire strain relief pin count 5 - 5-pin 6 - 6-pin length overall length in inches notes 100% electrical test, continuity, dwv (500 vac sea level) and insulation resistance (200 megohms minimum) unit pack: 1 ea. 4 mil poly bag, heat-sealed. includes dust cap. refer to part no. 152-001 for connector materials, fnishes, and dimensions. wire corresponding to contact f to be trimmed and insulated with m23053/8 shrink tubing if 5-pin connector is specifed. audio plug cordset with wire strain relief, factory terminated pigtail ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
7 hiper 55116 audio plug with termination porch and overmolding adapter 152-002 shrink boot with epoxy adhesive shrink boot groove 48 1.018 .720 .690 ? .836 .826 ground/emi spring (360 coverage) 1.590/1.560 how to order sample part number 152-002 -1 -3 series hiper 55116 audio plug with overmold adapter connector confguration (see table i) -1 = 5 pin, crimp -2 = 6 pin, crimp -3 = 5 pin, solder cup -4 = 6 pin, solder cup size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate notes plugs are identifed with glenairs name, part number and date code meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) table i: connector confguration 5 contacts 6 contacts 152-002-1 m55116/5 type (u-182) plug, 5 crimp sleeve terminals 152-002-2 m55116/6 type (u-182) plug, 6 crimp sleeve terminals 152-002-3 m55116/7 type (u-182) plug, 5 solder cup contacts 152-002-4 m55116/8 type (u-182) plug, 6 solder cup contacts audio plug with integrated emi ground spring, shield termination porch, integrated overmolding/sealing boot feature and rigid crimp terminal or solder cup contacts mates with 152-003 and 152-004, 151-003 and 151-004, and standard mil-dtl-55116 receptacles integrated emi ground spring ip68 rated sealing tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
8 hiper 55116 audio plug with band/overmold adapter, crimp-removable contacts 157-010 table i: connector confguration 5 contacts 6 contacts 157-011-1 m55116/1 type (u-182) plug, 5 crimp-removable contacts 157-011-2 m55116/2 type (u-182) plug, 6 crimp-removable contacts 48 1.018 ground/emi spring (360 coverage) contact retainer disc crimp-removable pin contact .820 .790 1.690/1.660 ? .836 .826 shrink boot groove shrink boot with epoxy adhesive crimp removable pin contact contact retainer disc how to order sample part number 157-010 -1 -3 series hiper 55116 audio plug with overmold adapter connector confguration (see table i) -1 = 5 pin, crimp-removable contacts -2 = 6 pin, crimp-removable contacts size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate notes plugs are identifed with glenairs name, part number and date code meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) crimp-removable pin contacts and contact retainer disc are supplied loose. contact glenair for the crimp tool and locator. audio plug with integrated emi ground spring, shield termination porch, integrated overmolding/sealing boot feature and crimp-removable contacts mates with 152-003 and 152-00, 151-003 and 151-00, and standard mil-dtl-55116 receptacles ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
9 hiper 55116 overmolded audio plug cordset 152-005 5-pin connector features only a-e brn blk a b c wiring diagram p1 red 22 awg 22 awg 22 awg conductors per, m22759/11 braid per, glenair part no. 100-001a d e f orn yel grn22 awg 22 awg 22 awg p1 glenair connector, 152-002 overmold, polyurethane cable jacket, polyurethane conductive braid for emi shielding capability brady label lat-18 or eq. overall length (see part number development) glenair "part number" yyww 06324 6-pin shown for refernce only tolerance is: (+1.80/-0.00) for "l" less than 60.00 inches. (+3%/-0.00) for "l" greater than 60.00 inches. how to order sample part number 152-005 -6 -xx series hiper 55116 overmolded cordset pin count 5 - 5-pin 6 - 6-pin length overall length in inches notes 100% electrical test, continuity, dwv (500 vac sea level) and insulation resistance (200 megohms minimum) unit pack: 1 ea. 4 mil poly bag, heat-sealed. includes dust cap. refer to part no. 152-002 for connector materials, fnishes, and dimensions. wire corresponding to contact f to be trimmed and insulated with m23053/8 shrink tubing if 5-pin connector is specifed. overmolded audio plug cordset, factory terminated pigtail tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
10 hiper 55116 in-line audio receptacle 152-004 shrink boot groove shrink boot with epoxy adhesive ? .594 .590 .510 .480 1.850 max ? .836 .826 .386 how to order sample part number 152-004 -1 -3 series hiper 55116 in-line receptacle connector confguration (see table i) -1 = 5 pin, crimp -2 = 6 pin, crimp -3 = 5 pin, solder cup -4 = 6 pin, solder cup size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate notes connectors are identifed with glenairs name, part number and date code meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) table i: connector confguration 5 contacts 6 contacts 152-004-1 m55116/11 type (u-228) receptacle, 5 crimp sleeve terminals 152-004-2 m55116/12 type (u-228) receptacle, 6 crimp sleeve terminals 152-004-3 m55116/13 type (u-228) receptacle, 5 solder cup contacts 152-004-4 m55116/14 type (u-228) receptacle, 6 solder cup contacts short-length in-line receptacle with shield termination porch, integrated overmolding/sealing boot feature and non-rigid spring contacts, crimp terminal and solder cup mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
11 hiper 55116 in-line audio receptacle with crimp-removable contacts 157-011 how to order sample part number 157-011 -1 -3 series hiper 55116 in-line receptacle connector confguration (see table i) -1 = 5 pin, crimp-removable contacts -2 = 6 pin, crimp-removable contacts size (cable accommodation) -1 = .165 .010 -2 = .228 .010 -3 = .250 .010 -4 = .290 .010 -5 = .320 .010 materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate notes connectors are identifed with glenairs name, part number and date code meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) crimp-removable pin contacts and contact retainer disc are supplied loose. contact glenair for the crimp tool and locator. table i: connector confguration 5 contacts 6 contacts 157-011-1 m55116/11 type (u-228) receptacle, 5 crimp-removable contacts 157-011-2 m55116/12 type (u-228) receptacle, 6 crimp-removable contacts short-length in-line receptacle with shield termination porch, integrated overmolding/sealing boot feature and crimp-removable contacts mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs .386 ? .836 .826 1.950 max .510 .480 ? .594 .590 shrink boot with epoxy adhesive shrink boot groove crimp-removable pin contact contact retainer disc contact retainer disc crimp-removable pin contact tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
12 hiper 55116 overmolded in-line audio receptacle cordset 152-007 22 awg 22 awg 22 awg grn yel orn f e d braid per, glenair part no. 100-001a conductors per, m22759/11 22 awg 22 awg 22 awg red j1 wiring diagram c b a blk brn 5-pin connector features only a-e tolerance is: (+1.80/-0.00) for "l" less than 60.00 inches. (+3%/-0.00) for "l" greater than 60.00 inches. 6-pin shown for refernce only glenair "part number" yyww 06324 overall length (see part number development) brady label lat-18 or eq. cable jacket, polyurethane overmold, polyurethane glenair connector, 152-004 type j1 how to order sample part number 152-007 -6 -xx series hiper 55116 cordset with wire strain relief pin count 5 - 5-pin 6 - 6-pin length overall length in inches notes 100% electrical test, continuity, dwv (500 vac sea level) and insulation resistance (200 megohms minimum) unit pack: 1 ea. 4 mil poly bag, heat-sealed. includes dust cap. refer to part no. 152-004 for connector materials, fnishes, and dimensions. wire corresponding to contact f to be trimmed and insulated with m23053/8 shrink tubing if 5-pin connector is specifed. overmolded in-line audio receptacle cordset, factory terminated pigtail ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
13 hiper 55116 radio-mount jam nut audio receptacle 152-003 .653 .657 .755 .765 ? recommended panel hole (standard per mil-dtl-55116) .953 .963 ? .640 .650 .590 .594 ? .905 .915 .220 ref .782 .792 .077 ref .750-20 unef-2a .653 .657 .755 .765 ? recommended panel hole (standard per mil-dtl-55116) .953 .963 ? .640 .650 .590 .594 ? .905 .915 .220 ref .782 .792 .077 ref .750-20 unef-2a how to order sample part number 152-003 -1 series hiper 55116 radio-mount jam nut receptacle connector confguration (see table i) -1 = 5 pin, solder cup -2 = 6 pin, solder cup materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate notes connectors are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) cable pull-out force (unmated): 100 lbf. (cable shield strength dependent) radio-mount jam nut receptacle with non-rigid spring contacts, solder cup mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs table i: connector confguration 5 contacts 6 contacts 152-003-1 m55116/9 type (u-183) receptacle, 5 solder cup contacts 152-003-2 m55116/10 type (u-183) receptacle, 6 solder cup contacts all dimensions are compliant with mil-dtl-55116/9 and /10 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
14 hiper 55116 radio mount audio receptacle with pc tails 152-013 materials and finishes shell and nut: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate contact spring: cres/passivated notes connectors are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water / 1 hr.) salt atmosphere: 1,000 hours (mil-std-202, method 101e) radio mount jam nut receptacle with non-rigid spring contacts, pc tail mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs table ii: pc tail dimensions dash no. ? a ? b c d -1 .040 .089 .115 .169 -2 .040 / / .437 -3 .028 .089 .188 .590 -4 .028 .089 .125 .194 -5 .028 .089 .208 .257 -6 .040 / / .110 -7 .028 .089 .150 .437 -8 .030 / / .120 -9 .028 .089 .140 .390 -10 .040 / / .744 -11 .030 .564 -12 .040 .110 -13 .040 .900 -14 .040 .257 how to order sample part number 152-013 -2 -4 product series hiper 55116 radio-mount jam nut receptacle with pc tail contacts connector style -1 = u-183 type 5-pin -2 = u-183 type 6-pin pc tail type see table ii .653 .657 recommended panel hole ? .765 .755 z z y x m .008 y x ?.281 5 or 6 x ? .063 .059 4x 72 pcb hole layout (152-013-2-x shown) angular position of pcb tails is 2. pcb layout will accommodate this tolerance. d c ? b ? a ? .963 .953 .650 .640 ? .594 .590 .915 .905 .792 .782 .077 ref .750-20 unef-2a o-ring 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
15 hiper 55116 radio mount audio receptacle with pc tails and 3 ground pins 152-012 materials and finishes shell and nut: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: ethylene propylene rubber contacts: copper alloy/gold plate contact spring: cres/passivated notes connectors are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116 type c, and exceeds the following: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. contact resistance (mated): 15 milliohms max. average; 20 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water / 1 hr.) salt atmosphere: 1,000 hours (mil-std-202, method 101e) radio mount jam nut receptacle with non-rigid spring contacts, pc tail, with 3 ground pins mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs table ii: pc tail dimensions dash no. ? a ? b c d -1 .040 .089 .115 .169 -2 .040 / / .437 -3 .028 .089 .188 .590 -4 .028 .089 .125 .194 -5 .028 .089 .208 .257 -6 .040 / / .110 -7 .028 .089 .150 .437 -8 .030 / / .120 -9 .028 .089 .140 .390 -10 .040 / / .744 -11 .030 .564 -12 .040 .110 -13 .040 .900 -14 .040 .257 how to order sample part number 152-012 -2 -4 product series hiper 55116 radio-mount jam nut receptacle with pc tail contacts and 3 ground pins connector style -1 = u-183 type 5-pin -2 = u-183 type 6-pin pc tail type see table ii ? .765 .755 recommended panel hole .657 .653 ?.625 4x 72 125 125 9x ? .063 .059 ?.281 x y .008 m x y z z pcb hole layout (152-012-2-x shown) angular position of pcb tails is 2. pcb layout will accommodate this tolerance. .915 .905 .792 .782 125 125 .750-20 unef-2a d c 3x ?.039 ?b ?a ? .594 .590 .650 .640 ? .963 .953 angular position of pcb tails is 2. pcb layout will accommodate this tolerance. ground pin 3x plcs. on a ?.625 pin circle 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
16 hiper 55116 filtered audio receptacle, radio mount with solder cup contacts 240-152-003 ?.755/.765 .653/.657 recommended panel hole how to order sample part number 240-152-003 -1 zmt -c a series hiper 55116 fltered receptacle, solder cups connector confguration (see table i) -1 = 5 pin, solder cup -2 = 6 pin, solder cup shell / nut finish zmt = nickel-ptfe filter type c = c-filter p = pi filter filter capacitance see table iii materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: eth ylene propylene rubber contacts: copper alloy/gold plate contac t spring: cres/passivated notes connectors are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116, and exceeds: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) filters meet the requirements of mil-std-2120 electrical performance filter topology and capacitance: see table iii insulation resistance = 1000 meghoms min at 200 vdc dwv = 500 vdc contact resistance (mated): 15 mf max average, 20 mf max curr ent rating: 0.5 amp filtered radio-mount jam nut receptacle with non-rigid spring contacts, solder cup mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs table i: connector confguration 5 contacts 6 contacts 240-152-003-1 m55116/9 type (u-183) receptacle, 5 solder cup contacts 240-152-003-2 m55116/10 type (u-183) receptacle, 6 solder cup contacts 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles .640/.650 flats ?.953/.963 ?.590/.594 .782/.792 c-filter = 1.175 max pi-filter = 1.310 max (.220) typ ?.750 max .750-20unef-2a .125 max panel table iii: capacitor array code/ capacitance range class pi - circuit (pf) c - circuit (pf) x 160,000 - 240,000 80,000 - 120,000 y 80,000 - 120,000 40,000 - 60,000 z 60,000 - 90,000 30,000 - 45,000 a 38,000 - 56,000 19,000 - 28,000 b 32,000 - 45,000 16,000 - 22,500 c 18,000 - 33,000 9,000 - 16,500 d 8,000 - 12,000 4,000 - 6,000 e 3,300 - 5,000 1,650 - 2,500 f 800 - 1,300 400 - 650 g 400 - 600 200 - 300 j 70-120 35-60 ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions in inches (millimeters) are subject to change without notice.
17 hiper 55116 filtered audio receptacle, radio mount with pc tails 240-152-013 ?.755/.765 .653/.657 recommended panel hole how to order sample part number 240-152-013 -1 zmt -c a series hiper 55116 fltered receptacle, pc tails connector confguration (see table i) -1 = 5 pin, solder cup -2 = 6 pin, solder cup shell / nut finish zmt = nickel-ptfe filter type c = c-filter p = pi filter filter capacitance see table iii materials and finishes shells and backshells: stainless steel/ ptfe -nickel plated (matte fnish) inserts: diallylphthalate resin type sdg-f seals: eth ylene propylene rubber contacts: copper alloy/gold plate contac t spring: cres/passivated notes connectors are identifed with glenairs name, part number and date code. meets interface confgurations and iaw specifcations of mil-dtl-55116, and exceeds: shell-to-shell conductivity: 2.5 milliohms max. cable shield-to-shell conductivity: 2.5 milliohms max. pressure sealing (mated & un-mated): ip68 (10 meters of standing water for 1 hour) salt atmosphere: 1,000 hours (mil-std-202, method 101e) filters meet the requirements of mil-std-2120 electrical performance filter topology and capacitance: see table iii insulation resistance = 1000 meghoms min at 200 vdc dwv = 500 vdc contact resistance (mated): 15 mf max average, 20 mf max curr ent rating: 0.5 amp table i: connector confguration 5 contacts 6 contacts 240-152-013-1 m55116/9 type (u-183) receptacle, 5 pc tail contacts 240-152-013-2 m55116/10 type (u-183) receptacle, 6 pc tail contacts 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles filtered radio-mount jam nut receptacle with non-rigid spring contacts, pc tail mates with 152-001 and 152-002, 151-001 and 151-002, and standard mil-dtl-55116 plugs 4x 72 pcb hole layout (240-152-013-2-*-* shown) ?.281 5 or 6 holes as required c-filter = 1.175 max pi-filter = 1.310 max .782/.792 ?.590/.594 ?.953/.963 .640/.650 flats ?.040 .002 typ ?.750 max .125 typ .750-20unef-2a .125 max panel table iii: capacitor array code/ capacitance range class pi - circuit (pf) c - circuit (pf) x 160,000 - 240,000 80,000 - 120,000 y 80,000 - 120,000 40,000 - 60,000 z 60,000 - 90,000 30,000 - 45,000 a 38,000 - 56,000 19,000 - 28,000 b 32,000 - 45,000 16,000 - 22,500 c 18,000 - 33,000 9,000 - 16,500 d 8,000 - 12,000 4,000 - 6,000 e 3,300 - 5,000 1,650 - 2,500 f 800 - 1,300 400 - 650 g 400 - 600 200 - 300 j 70-120 35-60 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
18 series 151 mil-dtl-55116 qpl mil-dtl- 55116 qpl audio frequency connectors selection guide mil-dtl-55116 qpl series 151 standard version connectors plus special-purpose derivatives and connector accessories series 151 mil-dtl-55116 selection guide part description glenair p/n mil p/n, u designator mates with page audio plug, feld-serviceable with wire strain relief and rigid contacts, crimp (cots) and solder cup 151-001 m55116/1 C /4 u-229 152-003 hiper 55116 type jam nut receptacle 152-004 hiper 55116 type in-line receptacle 151-003 standard 55116 type jam nut receptacle 151-004 standard 55116 type in-line receptacle any m55116 receptacle 20 audio plug with overmold adapter and rigid contacts, crimp (cots) and solder cup 151-002 m55116/5 C /8 u-182 21 radio-mount jam nut receptacle with non-rigid spring contacts 151-003 m55116/9 C /10 u-183 152-001 hiper 55116 type plug 152-002 hiper 55116 type plug 151-001 standard 55116 type plug 151-002 standard 55116 type plug any m55116 plug 22 in-line receptacle with wire strain relief and non-rigid spring contacts, crimp (cots) and solder 151-004 m55116/11 C /14 u-228 23 series 151 mil-dtl-55116-type special connectors, adapters, and accessories selection guide part description glenair p/n corresponding mil p/n, u designator mates with page all-metal audio plug with wire strain relief 151-015 m55116/1 C /4 type u-229 152-003 hiper 55116 type jam nut receptacle 152-004 hiper 55116 type in-line receptacle 151-003 standard 55116 type jam nut receptacle 151-004 standard 55116 type in-line receptacle any m55116 receptacle 24 audio plug with integral confgurable 90 backshell 157-008 n/a 25 radio-mount jam nut audio receptacle with pc tails 151-005 m55116/9 C /10 type u-183 152-001 hiper 55116 type plug 152-002 hiper 55116 type plug 151-001 standard 55116 type plug 151-002 standard 55116 type plug any m55116 plug 26 radio-mount jam nut audio receptacle with pc tails and 3 ground pins 151-010 27 audio connector feed-thru adapter, 55116 to d38999 157-005 n.a adapts any 151- or 152- series 55116 type plug or any m55116 plug to 09-35 d38999 series iii threaded plug. 28 audio connector feed-thru adapter, 55116 to mighty mouse 804 157-012 n/a adapts any 151- or 152- series 55116 type plug or any m55116 plug to 6-6 series 804 mighty mouse plug 29 dummy receptacle for series 151 and 152 plugs 657-098 n/a any 151- or 152- series plug any m55116 plug 30 protective covers for series 151 and 152 connectors 664-374 667-355 n/a any 151- or 152- series connector any m55116 connector 31 rubber protective cover for series 151 and 152 receptacles 151-008 n/a any 151- or 152- series receptacle any m55116 receptacle 32 glenair ofers a series of qualifed mil-dtl-55116 audio plugs and receptacles in all standard confgurations: feld-servicable plug, plug with overmold adapter, in-line receptacle with wire strain relief, and radio-mount jam nut receptacle. our family of special-purpose derivatives features performance iaw m55116 specifcations with options not available in the mil-spec, and a complement of connector accessories is available including adapters, dummy receptacles, and protective covers. ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
19 series 151 mil-dtl-55116 qpl mil-dtl- 55116 qpl audio frequency connectors performance specifcations series 151 performance specifcations test description performance requirements/specifcations procedure per mil-dtl-55116 or other standard dielectric withstanding voltage no arcing or dielectric breakdown. sea level: 500 v rms between each contact, remaining contacts connected together, and to the shell. one minute dwell. high altitude: barometric pressure 3.4 in of mercury, 300 v rms applied as described above. 4.7.1 insulation resistance not less than 1000 megohms (not less than 100 megohms for unmated connectors following the immersion test). measured between each contact, remaining contacts connected together, and to the shell. 4.7.2 contact resistance terminal-to-terminal resistance of mated connector contacts shall not exceed 0.050 ohms. 4.7.3 contact depression force required to depress contacts .080 inches from the normal plane of the contact face: individual contacts: 1.25 lbs. C 1.75 lbs. 5 contacts: 6.25 lbs. C 8.75 lbs. 6 contacts: 7.5 lbs. C 10.5 lbs. 4.8.1 air pressure no evidence of leakage through the connector under 2.5 psi applied to contact face and rear of the plug or receptacle 4.8.2 mating durability 3000 cycles with no mechanical damage. dielectric, contact resistance and air pressure requirements as described above shall be met after 3000 mating cycles. 4.8.3 contact retention individual contacts capable of withstanding at least 10 pounds axial load applied uniformly at one pound per second. 4.8.4 compression no distortion or damage that would afect form, ft, or function at 500 pounds applied to axis. 4.8.6 pull test connectors shall withstand an abrupt axial force of 40 lbs. applied to the shell, and 25 lbs. applied to the cable with no visible damage, and lock and unlock without difculty. 4.8.7 bounce test on package testing table, operating at 2842 rpm for 3 hours, circular-synchronous motion in a vertical plane with a one in dia. orbital displacement. connectors show no evidence of cracking, breaking, or loosening. connectors will meet electrical and leakage requirements following test. 4.9.1 vibration plugs and receptacles mounted to vibration table, subjected to a simple harmonic motion with amplitude of 0.03 inch (0.06 maximum), frequency varied uniformly from 10-55 hz., entire range traversed in approximately one minute, for two hours in each of three perpendicular directions. no evidence of cracking, breaking or loosening of parts, and the plug shall not become disengaged from the receptacle. 4.9.2 and mil-std-202g, method 201a drop connectors dropped six times at random from a height of six feet to two inch fr foor backed with concrete or rigid steel frame shall show no degradation in performance, no physical damage that would afect mateability, and no loose parts. following the test, connectors shall meet electrical and air leakage requirements described above. 4.9.3 temperature cycling -55c to +85c, 5 cycles. connectors are capable of mating and unmating during ffth cycle, and meet electrical and air leakage requirements described above. mil-std-202, method 107, test condition a salt spray 48 hours, 5% solution, 35c 3c. no evidence of base metal corrosion. mil-std-202, method 101e, test condition b humidity 50% mated and 50% unmated, cycled between 25c at 80% C 98% relative humidity to 65c at 90% C 98% relative humidity. ramp time = 2.5 hrs. dwell time = 3 hrs., 10 cycles, 240 hrs. total. following test, connectors meet electrical and air leakage requirements described above. 4.9.6 and eia-364-31, method iv (step 7a not required) water immersion plugs assembled to test cables and each other, and to receptacles, immersed in tap water to a depth of six feet for 48 hours. no evidence of leakage into the body of unmated connectors or into the body or contact-face area of mated connectors. 4.9.7 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
20 series 151 mil-dtl-55116 qpl field-serviceable audio plug with wire strain relief 151-001 ? m55116/3 - /4 ? u-229 no. of contacts contact type ? cable .010 mil spec part number glenair part number mates with 5 crimp (cots) .165 n/a 151-001-1-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 n/a 151-001-1-2 .250 n/a 151-001-1-3 .290 n/a 151-001-1-4 .320 n/a 151-001-1-5 6 crimp (cots) .165 n/a 151-001-2-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 n/a 151-001-2-2 .250 n/a 151-001-2-3 .290 n/a 151-001-2-4 .320 n/a 151-001-2-5 5 solder cup (qpl) .165 m55116/3-1 151-001-3-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 m55116/3-2 151-001-3-2 .250 m55116/3-3 151-001-3-3 .290 m55116/3-4 151-001-3-4 .320 m55116/3-5 151-001-3-5 6 solder cup (qpl) .165 m55116/4-1 151-001-4-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 m55116/4-2 151-001-4-2 .250 m55116/4-3 151-001-4-3 .290 m55116/4-4 151-001-4-4 .320 m55116/4-5 151-001-4-5 u-229 plug, 5 crimp contacts u-229 plug, 6 crimp contacts u-229 plug, 5 solder cup contacts u-229 plug, 6 solder cup contacts series 151 mil-dtl-55116 qpl audio plugs are designed for high-reliability, severe environment radio communications equipment. they are available in both 5 pin and 6 pin confgurations, with either crimp sleeve (cots) or solder cup terminals (qpl). all feature versatile wire strain relief to protect cable conductors from damage. shells are made of nylon overmolded passivated stainless steel, contacts are gold plated copper alloy. plug connector contacts are sealed in the unmated condition. flat in knurling ref ref ref 1.200 .250 1.308 ? .836 .826 .360 ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
21 series 151 mil-dtl-55116 qpl molded audio plug 151-002 ? m55116/7 - /8 ? u-182 no. of contacts contact type ? cable .010 mil spec part number glenair part number mates with 5 crimp .165 n/a 151-002-1-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 n/a 151-002-1-2 .250 n/a 151-002-1-3 .290 n/a 151-002-1-4 .320 n/a 151-002-1-5 6 crimp .165 n/a 151-002-2-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 n/a 151-002-2-2 .250 n/a 151-002-2-3 .290 n/a 151-002-2-4 .320 n/a 151-002-2-5 5 solder cup .165 m55116/7-1 151-002-3-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 m55116/7-2 151-002-3-2 .250 m55116/7-3 151-002-3-3 .290 m55116/7-4 151-002-3-4 .320 m55116/7-5 151-002-3-5 6 solder cup .165 m55116/8-1 151-002-4-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 m55116/8-2 151-002-4-2 .250 m55116/8-3 151-002-4-3 .290 m55116/8-4 151-002-4-4 .320 m55116/8-5 151-002-4-5 series 151 mil-dtl-55116 qpl molded audio plugs are designed for overmolding in cable cordsets for high-reliability, severe environment radio communications equipment, and are not feld-serviceable. they are available in 5 pin and 6 pin confgurations, with crimp sleeve (cots) or solder cup (qpl) terminals. shells are made of nylon overmolded passivated stainless steel, contacts are gold plated copper alloy. plug connector contacts are sealed in the unmated condition. u-182 plug, 5 crimp contacts u-182 plug, 6 crimp contacts u-182 plug, 5 solder cup contacts u-182 plug, 6 solder cup contacts flat in knurling .095 ref 1.308 ref ? .836 .826 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
22 series 151 mil-dtl-55116 qpl radio-mount jam nut audio receptacle 151-003 ? m55116/9 - /10 ? u-183 series 151 mil-dtl-55116 qpl panel mount jam nut receptacles are designed for high- reliability, severe environment communications equipment. they are available in either a 5 pin or 6 pin confguration. receptacles are equipped with solder cup spring terminals and a jam nut for panel mounting. shells and nuts are made of passivated stainless steel, contacts are gold plated copper alloy. receptacle connector contacts are sealed in the unmated condition. no. of contacts contact type mil spec part number glenair part number mates with 5 solder cup m55116/9-0 151-003-1 152-001-1 152-001-3 152-002-1 152-002-3 152-005-5 152-006-5 151-001-1 151-001-3 151-002-1 151-002-3 6 solder cup m55116/10-0 151-003-2 152-001-2 152-001-4 152-002-2 152-002-4 152-005-6 152-006-6 151-001-2 151-001-4 151-002-2 151-002-4 u-183 jam nut receptacle, 5 solder cup contacts u-183 jam nut receptacle, 6 solder cup contacts .657 .653 ? .765 .755 recommended panel hole ? .963 .953 .650 .640 ? .594 .590 .915 .905 .220 ref .792 .782 .077 ref .750-20 unef-2a 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
23 series 151 mil-dtl-55116 qpl in-line audio receptacle with wire strain relief 151-004 ? m55116/13 - /14 ? u-228 series 151 mil-dtl-55116 qpl in-line audio receptacles are designed for high-reliability tactical communications equipment. they are available in both 5 pin and 6 pin confgurations, with either crimp sleeve (cots) or solder cup (qpl) pogo pin terminals. all feature wire strain relief to protect cable conductors from damage. shells are made of passivated stainless steel, contacts are gold plated copper alloy. receptacle connector contacts are sealed in the unmated condition. no. of contacts contact type ? cable .010 mil spec part number glenair part number mates with 5 crimp .165 n/a 151-004-1-1 152-001-1 152-001-3 152-002-1 152-002-3 152-005-5 152-006-5 151-001-1 151-001-3 151-002-1 151-002-3 .228 n/a 151-004-1-2 .250 n/a 151-004-1-3 .290 n/a 151-004-1-4 .320 n/a 151-004-1-5 6 crimp .165 n/a 151-004-2-1 152-001-2 152-001-4 152-002-2 152-002-4 152-005-6 152-006-6 151-001-2 151-001-4 151-002-2 151-002-4 .228 n/a 151-004-2-2 .250 n/a 151-004-2-3 .290 n/a 151-004-2-4 .320 n/a 151-004-2-5 5 solder cup .165 m55116/13-1 151-004-3-1 152-001-1 152-001-3 152-002-1 152-002-3 152-005-5 152-006-5 151-001-1 151-001-3 151-002-1 151-002-3 .228 m55116/13-2 151-004-3-2 .250 m55116/13-3 151-004-3-3 .290 m55116/13-4 151-004-3-4 .320 m55116/13-5 151-004-3-5 6 solder cup .165 m55116/14-1 151-004-4-1 152-001-2 152-001-4 152-002-2 152-002-4 152-005-6 152-006-6 151-001-2 151-001-4 151-002-2 151-002-4 .228 m55116/14-2 151-004-4-2 .250 m55116/14-3 151-004-4-3 .290 m55116/14-4 151-004-4-4 .320 m55116/14-5 151-004-4-5 u-228 receptacle, 5 crimp contacts u-228 receptacle, 6 crimp contacts u-228 receptacle, 5 solder cup contacts u-228 receptacle, 6 solder cup contacts ? .631 .627 1.200 ref .250 ref .360 ref 1.579 ref ? .908 .898 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
24 series 151 mil-dtl-55116 type all-metal audio plug with wire strain relief 151-015 no. of contacts contact type ? cable .010 mil spec part number glenair part number mates with 5 crimp (cots) .165 n/a 151-015-1-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 n/a 151-015-1-2 .250 n/a 151-015-1-3 .290 n/a 151-015-1-4 .320 n/a 151-015-1-5 6 crimp (cots) .165 n/a 151-015-2-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 n/a 151-015-2-2 .250 n/a 151-015-2-3 .290 n/a 151-015-2-4 .320 n/a 151-015-2-5 5 solder cup (qpl) .165 n/a 151-015-3-1 152-003-1 152-004-1 152-004-3 152-007-5 151-003-1 151-004-1 151-004-3 .228 n/a 151-015-3-2 .250 n/a 151-015-3-3 .290 n/a 151-015-3-4 .320 n/a 151-015-3-5 6 solder cup (qpl) .165 n/a 151-015-4-1 152-003-2 152-004-2 152-004-4 152-007-6 151-003-2 151-004-2 151-004-4 .228 n/a 151-015-4-2 .250 n/a 151-015-4-3 .290 n/a 151-015-4-4 .320 n/a 151-015-4-5 u-329 plug, 5 crimp contacts u-329 plug, 6 crimp contacts u-329 plug, 5 solder cup contacts u-329 plug, 6 solder cup contacts series 151 mil-dtl-55116 type all-metal audio plugs are designed for high-reliability, severe environment radio communications equipment. they are available in both 5 pin and 6 pin confgurations, with either crimp sleeve (cots) or solder cup terminals (qpl). all feature versatile wire strain relief to protect cable conductors from damage. shells are made of passivated stainless steel, contacts are gold plated copper alloy. plug connector contacts are sealed in the unmated condition. 1.20 ref .25 ref .36 ref 1.308 ? .836 .826 flat in knurling ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
25 series 151 mil-dtl-55116 type audio plug with 8-position confgurable 90 cable entry 157-008 1.311 ?.831 1.170 ?.168 .002 opening accepts 6 conductors with max insulation of ?.045 each. ?.266 45 8 wire entry positions at 45 intervals how to order sample part number 157-008 -2 product series mil-dtl-55116 type audio plug with 90 cable entry connector style -1 = 5 pin -2 = 6 pin 157-008 mil-dtl-55116 type audio plugs feature 90 cable entry with an integrated, confgurable 8-position backshell. 6 conductors accommodation with max ? .045" insulation each. available in both 5 pin and 6 pin confgurations. shells are made of passivated stainless steel, contacts are gold plated copper alloy. plug connector contacts are sealed in the unmated condition. exploded view alignment flat set screws, 3 places 90 backshell o-ring seal cable assembly instructions for 157-008 1. strip the cable back 2.125" C 2.375" in and cut back the shield to leave .750" C .875" from the cable jacket. 2. strip the end of the wires back .15" C .19" and pre-tin the ends. 3. slide the adhesive-lined shrink tubing over the cable to shrink later. 4. insert the 5 or 6 wires into the ferrule and out the front of the backshell, guiding the shield over the ferrule to provide sufcient wire to exit the backshell. 5. a short piece of shrink tubing may be applied to each of the individual wires to shrink after soldering. if used, slide shrink tubing down each wire before soldering. 6. solder the pre-tinned wires to the appropriate contact position. 7. shrink the individual shrink sleeves over the solder bucket and wires. 8. position the fat relative to the desired ferrule exit angle. rotate the connector to form a service loop and push into the backshell until the alignment keys come close to the keyways. then rotate the connector back to the desired angle and push into the backshell until seated. 9. lock down each of the 3 set screws while holding the backshell tight against the plug connector. apply locktite theadlocker 290 and torque the screws 3.2 in lbs. 10. push the cable against the end of the ferrule and wind the constant force spring (3m cfs 59, not supplied) over the shield. slide the shrink sleeve over the ferrule and constant force spring. shrink down and observe that the adhesive exits on each end. your assembly is now complete. tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
26 series 151 mil-dtl-55116 type jam nut audio receptacle with pc tails 151-005 151-005 mil-dtl-55116 type receptacles available in 5 or 6 pin confguration, equipped with pc tails. shell and nut is stainless steel with passivated/light sand blasted fnish iaw mil-f-14072 type f300. also available with nickel-ptfe fnish. contacts are gold plated copper. table ii: pc tail dimensions dash no. ? a ? b c d -1 .040 .089 .115 .169 -2 .040 / / .437 -3 .028 .089 .188 .590 -4 .028 .089 .125 .194 -5 .028 .089 .208 .257 -6 .040 / / .110 -7 .028 .089 .150 .437 -8 .030 / / .120 -9 .028 .089 .140 .390 -10 .040 / / .744 -11 .030 .564 -12 .040 .110 -13 .040 .900 -14 .040 .257 .657 .653 ? .765 .755 recommended panel hole how to order sample part number 151-005 -2 -4 -zmt product series mil-dtl-55116 type jam nut audio receptacle with pc tail contacts connector style -1 = u-183 type 5-pin -2 = u-183 type 6-pin pc tail type see table ii finish option -zmt = nickel-ptfe fnish. leave blank for standard passivated fnish ? .963 .953 .650 .640 ? .594 .590 .915 .905 .792 .782 .077 ref .750-20 unef-2a d c ? b ? a 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
27 series 151 mil-dtl-55116 type jam nut audio receptacle with pc tails and 3 ground pins 151-010 151-010 mil-dtl-55116 type receptacles available in 5 or 6 pin confguration, equipped with pc tails and 3 shell ground contacts. shell and nut are stainless steel with passivated/light sand blasted fnish iaw mil-f-14072 type f300. contacts are gold plated copper. table ii: pc tail dimensions dash no. ? a ? b c d -1 .040 .089 .115 .169 -2 .040 / / .437 -3 .028 .089 .188 .590 -4 .028 .089 .125 .194 -5 .028 .089 .208 .257 -6 .040 / / .110 -7 .028 .089 .150 .437 -8 .030 / / .120 -9 .028 .089 .140 .390 -10 .040 / / .744 -11 .030 .564 -12 .040 .110 -13 .040 .900 recommended panel hole ? .765 .755 .657 .653 ?.625 4x 72 125 125 9x ? .063 .059 ?.281 x y .008 m x y z z pcb hole layout (151-010-2-x shown) angular position of pcb tails is 2. pcb layout will accommodate this tolerance. angular position of pcb tails is 2. pcb layout will accommodate this tolerance. ground pin 3x plcs. on a ?.625 pin circle .915 .905 .792 .782 .750-20 unef-2a ? .594 .590 .650 .640 ? .963 .953 125 125 d c ?.039 ?b ?a how to order sample part number 151-010 -2 -4 product series mil-dtl-55116 type jam nut audio receptacle with pc tail contacts and 3 shell ground contacts connector style -1 = u-183 type 5-pin -2 = u-183 type 6-pin pc tail type see table ii 600-196 spanner tool spanner tool with socket drive attachment for all series 151 and 152 55116 receptacles tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
28 series 151 mil-dtl-55116 type audio connector feed-thru adapter, 55116 to d38999 157-005 157-005 is a wall/panel-mount, square-fange feed-thru adapter. mil-dtl-55116 type receptacle on one side, mil-dtl-38999 series iii threaded plug on the other, shell size 09, insert arrangement 09-35. stainless steel passivated shells, gold-plated copper alloy contacts. 4 6 5 3 2 1 .6250-.1p-.3l-ts-2a 1.819 ref ?.666 ?.629 ?.592 .450 .250 .732 .268 .819 2x .938 2x .719 4x ?.128 4x .070 x 45 (36) master keyway how to order sample part number 157-005 product series mil-dtl-55116 to d38999 series iii adapter contact assignments mil-dtl-55116 mil-dtl-38999 a 1 b 2 c 3 d 4 e 5 f 6 ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
29 series 151 mil-dtl-55116 type audio connector feed-thru adapter, 55116 to mighty mouse 157-012 157-012 jam nut adapter mates to any m55116 /2, /4, /6, or /8 audio plug on one end, and a series 804 mighty mouse push-pull connector with a 6-6 arrangement on the other, such as 804-001 or 804-002, z1 material/fnish code. stainless steel passivated shell/jam nut, gold- plated copper contacts and copper alloy contact springs. how to order sample part number 157-012 product series mil-dtl-55116 to series 804 mighty mouse adapter contact assignments mil-dtl-55116 series 804 mighty mouse a 2 b 1 c 5 d 4 e 3 f 6 1 2 3 4 5 6 804 series 6-6 arrangement ?.575 .542 .538 recommended panel cutout ?.938 (36) .732 .450 .250 .358 .832 (1.922) .625 max panel thickness .5625-32un-2a thread .532 .528 tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
30 series 151 mil-dtl-55116 type dummy receptacle for series 151 and 152 plugs 657-098 how to order sample part number 657-098 product series mil-dtl-55116 type dummy receptacle 657-098 dummy receptacle mates with all glenair series 151 and 152 mil-dtl-55116 plugs. stainless steel construction with black oxide fnish per mil-c-13924, class 4. .09 .625 alignment mark, color, orange 16 14 r .040 .030 .252 .248 ? .631 .627 ? .594 .590 a a 135 105 ? .456 .450 4x ? .149 .143 36 .724 .714 sq ?1.281 1.031 sq 3x .058 .054 ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
31 series 151 mil-dtl-55116 type protective covers for 151 and 152 series plugs/receptacles 667-374 and 667-355 table 1 plug cover dash no. dash number a dia b dia 1 .516 (13.11 .891 (22.63) 2 .587 (14.91) .805 (20.45) 3 .587 (14.91) .805 (20.45) 4 .646 (16.41) 1.016 (25.81) 5 .713 (18.11) .995 (25.27) how to order sample part number 667-374 zmt -3 cover confguration 667-374 = plug cover 667-355 = receptacle cover finish zmt = nickel tefon over passivated stainless steel (omit for stainless steel, passivated) dash number (plug cover only) see table i 667-374/355 protective covers are designed for high-reliability, severe environment communications series 151 mil-dtl-55116 type connectors and meet the interface confgurations and specifcations of mil-dtl-55116c. (?b) (?a) ?.840 max over knurl rivet ring wire rope, nylon jacket, color clear lug terminal lug terminal 4.00.25 .760 max alignment mark filled with orange paint 4.00.25 lug terminal lug terminal wire rope, nylon jacket, color clear ring rivet .50 max ?.840 max over knurl o-ring seal (?77) (?1.14) alignment mark filled with orange paint material/finish/notes shell: stainless steel/passivated ring, rivets, terminals and nylon-jacketed wire rope: stainless steel/passivated assemblies are identifed with glenairs name, part number and date code, space permitting. 667-374 plug cover 667-355 receptacle cover tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
32 series 151 mil-dtl-55116 type rubber protective cover for sr. 151/152 receptacles 151-008 how to order sample part number 151-008 -g 4 -ws product series rubber cover for 151 series receptacles nylon cord attachment -g = basic nylon cord attachment ( omit for none) attachment length in inches, .25 (6.35) attachment dash no. 00 = no terminal ws = with strap scs = slip/crimp sleeve see table i 151-008 rubber protective covers are designed for high-reliability, severe environment communications series 151 mil-dtl-55116 type receptacles, and meet the interface confgurations and specifcations of mil-dtl-55116c. material/finish/notes cover: neoprene, no fnish cord: 1/16" diameter nylon tie-wrap strap: black nylon screw and locknut: cres, passivated slip/crimp sleeve: copper/black chromate over zinc cobalt assemblies are identifed with glenairs name, part number and date code, space permitting. slip/crimp sleeve (-scs) attachment provides an adjustable slip-knot style termination. altarnatively, after positioning cord onto a cable, it can be crimped with pliers to attach permanently. table 1 dash number c dia .010 (0.3) d dia .010 (0.3) 01 .126 (3.2) .30 (7.6) 02 .140 (3.6) .30 (7.6) 03 .145 (3.7) .30 (7.6) 04 .156 (4.0) .30 (7.6) 05 .167 (4.2) .30 (7.6) 06 .188 (4.8) .30 (7.6) 07 .197 (5.0) .30 (7.6) 08 .766 (19.5) 1.14 (29.0) ?.72 ?.60 ?.56 .63 .31 .38 .17 length length measured at .50 diameter ?.50 ref slip / crimp sleeve (-scs see table i) no lug, fused end (-00 table i) with strap termination (-ws) lug termination (see table i) ? c (see table i) ? d (dash no. 08) ? c (see table i) solid ring (see part number development) (dash 01 - 07) ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
33 band-master ats ? emi/rfi shield termination nano banding tool and bands for series 151 and 152 connectors with banding platforms band-master ats? nano band selection length part number fits diameter bands in. mm. flat pre-coiled in. mm. short nano 6.0 152.4 601-500 601-501 .60 15.2 medium nano 9.0 228.6 601-504 601-505 .94 23.9 long nano 14.0 355.6 601-508 601-509 1.8 45.7 weighs 1.15 lbs., and is designed for nano fat .075" width clamping bands in a tension range from 20 to 50 lbs. calibrate at 50 lbs. 3 lbs. for most shield terminations. tool and band should never be lubricated. the 601-108 band-master ats nano tool with counter for nano bands cable pull strength for band-master ats? nano bands name material type band width band thick- ness tool setting cable pull strength in. mm. in. mm. nano 300 ss 0.075 1.91 .009 .23 50 3 lbs 50 lbs* * nano bands are work hardened to achieve higher cable pull force color-coded tool handle: = nano; green medium flat 601-504 medium precoiled 601-505 nano bands are precision constructed of work hardened, 300 series sst passivate iaw ams 2700. medium nano bands are 9.00 inches (228.6) in length and designed for use with the 601-108 band-master? ats hand banding tool or the 601-118 pneumatic banding tool . bands should always be double wrapped and will accommodate diameters up to approximately .94 inches (23.9). short flat 601-500 short precoiled 601-501 nano bands are precision constructed of work hardened, 300 series sst passivate iaw ams 2700. short nano bands are 6.00 inches (152.4) in length and designed for use with the 601-108 band-master? ats hand banding tool or the 601-118 pneumatic banding tool . bands should always be double wrapped and will accommodate diameters up to approximately .60 inches (15.2). long flat 601-508 long precoiled 601-509 nano bands are precision constructed of work hardened, 300 series sst passivate iaw ams 2700. long nano bands are 14.25 inches (361.95) in length and designed for use with the 601-108 band-master? ats hand banding tool or the 601-118 pneumatic banding tool . bands should always be double wrapped and will accommodate diameters up to approximately 1.8 inches (45.7). tail length indicator mark .124 (3.1) ref. .009 (0.2) ref. 6.0 .030 (152.4 0.8) .056 (2.29) ref. .038 (0.9) ref. .075 (1.9) ref. tail length indicator mark .124 (3.1) ref. .009 (0.2) ref. 9.0 .030 (228.6 0.8) .038 (0.9) ref. .075 (1.9) ref. .056 (2.29) ref. tail length indicator mark .124 (3.1) ref . .009 (0.2) ref. 14.00 .030 (361.95 0.8) .038 (0.9) ref. .075 (1.9) ref . .056 (2.29) ref. tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
34 star-pan ? multiport power and data hubs for soldier personal area networks r uggedized soldier-worn electronics have revolutionized mission efectiveness. but the evolution of advanced radio communications, tactical video, night vision technologies, gps/navigation, blue force tracking, personal computing and smart phones have added signifcant mission weight to the dismounted soldier ensemble. battery power management for this broad range of electronic gear is a signifcant challenge in terms of mission time, weight and supply logistics. the glenair star-pan? data hub and power distribution system enables soldiers to make the most of personal area network (pan) devices improving situational awareness, surveillance, intelligence and reconnaissancewhile optimizing power monitoring, conditioning, and distribution performance. importantly, all star-pan? technologies, from feld-proven glenair connectors and cables to the low-profile hub enclosures are designed for optimal size, weight, and ruggedized mil- spec performance. glenair star-pan? hubs feature integrated connectors and brazed construction: no bulky bolt-on connectors to vibrate loose, no tongue-and-groove construction leading to poor environmental or emc performance. ? ? versatile 2, 4, and 6-port usb high-speed hub configurations ? ? compatible with usb 1.1, usb 2.0, and smbus ? ? embedded power charging/conditioning electronics in all designs ? ? smart power monitoring for longer mission life ? ? robust circuit protection ? ? sealed and iaw mil-std-810 harsh- environment standard warfighter tough glenairs tactical interconnect solutions team is backed by six decades of proven, made-in-america interconnect industry performance in service of us and allied armed forces star-pan? packaging reduces heat and increases power efciency and battery life export of star-pan? usb hub/power distribution systems is restricted and/or controlled by u.s. department of commerce export administration regulations ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324
35 warfighter tough star-pan ? multiport usb hub / power distribution technology for c4isr systems star-pan? hub and board technologies glenair multiport star-pan? usb hub and power distribution systems are engineered and manufactured under one iso 9001:2008 and as9100c certifed quality system in our 1,000,000 sq. ft southern california factory. all components, from the i/o interconnects to the precision-machined enclosures are produced in-house by glenair. the star-pan? system is designed for maximum compatibility with non-proprietary ethernet* and usb data interfaces, and is capable of smart charging and power distribution for the broad range of military batteries, as well as from direct current (dc) power sources including vehicle power, solar panels, kinetic energy devices and fuel cells. * requires star-pan? ethernet adapter star-pan? iv ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? star-pan? vi ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? star-pan? ii ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ultraminiature form factor: .50" thick, 3.75" wide, 4.25" tall lightweight, non-refective, power and data hub for tactical radios and peripheral devices the ultimate data backplane, power monitoring and distribution hub for tactical soldier systems tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
36 star-pan? system host, peripheral, radio, and hub charging cable assemblies general-purpose star-pan? system cables nett warrior (c1) extension cable host usb-a cable c4 micro usb eud host cable 808-047 808-079 808-046 star-pan? power adapters cigarette lighter power adapter ac/dc power adapter bb5590 / 2590 battery adapter hand-held radio battery adapter 808-059 808-064 808-048 808-066 star-pan? peripheral device cables tacrover-e cable radio adapter cable usb 2.0 adapter cable 808-043 808-080 808-053 dagr gps/navigation cable tacrover-p isr receiver cable plrf-15c/25c laser range finder cable 808-040 808-045 808-049 star-pan? radio data / power cables and adapters microlight radio data cable prc-117g radio data cable harris radio adapter cable prc-148 radio data adapter prc-152a radio data adapter prc-154 rifeman radio data adapter 808-044 808-035 808-088 808-039 808-032 808-051 warfighter tough star-pan system host, peripheral, radio, and hub charging cable assembly showcase ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
tactical interconnect solutions for more information contact glenair at 818-247-6000 or visit our website at www.glenair.com u.s. cage code 06324 the glenair tactical interconnect solutions team is backed by a company of scale with over 3000 technical employees, 1,000,000 sq. feet of manufacturing space, and over 60 years of experience designing and building interconnect solutions for military customers. here is a quick tour of some of our core capabilities. our connector machining and box milling facilities are the largest in the interconnect industry, with ample capacity for both small and large production runs. just a small slice of the engineering talent at work at glenair. in addition to their interconnect design work, the team generates acceptance test requirements for printed circuit boards as well as complete systems. in-house clean room facilities for pcb and flex circuit fabrication as well as emi/rfi filter array assembly distinguish glenair from virtually every other supplier of tactical hubs and interconnect power systems. glenair star-pan? hub assemblies feature integrated / welded i/o interconnectsthe ultimate in low-profile, rugged design. the tactical interconnect team runs its own dedicated star-pan? termination, assembly, and overmolded cable cell. tactical interconnect solutions ? 2017 glenair, inc ? 1211 air way, glendale, ca 91201 ? 818-247-6000 ? www.glenair.com ? u.s. cage code 06324 ? qpl and hiper mil-dtl-55116 dimensions are subject to change without notice.
glenair, inc. 1211 air way ? glendale, california ? 91201-2497 telephone: 818-247-6000 ? fax: 818-500-9912 ? sales@glenair.com www.glenair.com telephone: +44-1623-638100 facsimile: +44-1623-638111 sales@glenair.co.uk glenair uk ltd 40 lower oakham way oakham business park mansfeld, notts ng18 5by england telephone: 06172 / 68 16 0 facsimile: 06172 / 68 16 90 info@glenair.de glenair electric gmbh schaberweg 28 61348 bad homburg germany telephone: +33-5-34-40-97-40 facsimile: +33-5-61-47-86-10 sales@glenair.fr glenair france sarl 7, avenue parmentier immeuble central parc #2 31200 toulouse france telephone: 847-679-8833 facsimile: 847-679-8849 glenair microway systems 7000 north lawndale avenue lincolnwood, il 60712 telephone: +46-8-50550000 sales@glenair.se glenair nordic ab gustav iii : s boulevard 46 se-169 27 solna sweden ? 2017 glenair, inc. prin ted in u.s.a. cat-147 telephone: +34-925-89-29-88 facsimile: +34-925-89-29-87 sales@glenair.es glenair iberica c/ la vega, 16 45612 velada spain telephone: 203-741-1115 facsimile: 203-741-0053 sales@glenair.com glenair power products group 860 n. main street extension wallingford, ct 06492 telephone: +39-051-782811 facsimile: +39-051-782259 info@glenair.it telephone: +82-31-8068-1090 facsimile: +82-31-8068-1092 sales@glenair.kr glenair italia s.p.a. via del lavoro, 7 40057 quarto inferiore C granarolo dellemilia bologna, italy glenair korea b-1304 gunpo it valley 148 gosan-ro, gunpo-si kyunggi-do, korea 435-733 inte r co nn e ct so lut io ns out of this world
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: glenair: ? 152-002-2-5? 152-003-1? 152-007-5-12? 152-004-2-5? 152-005-5-12? 152-001-1-5

▲Up To Search▲

Price & Availability of 152-005-5-12

	To Download 152-005-5-12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .