8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 1 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? applications general purpose for if applications product features functional block diagram top view typical 3 db bandwidth of 1.1 mhz low loss high attenuation single - ended operation ceramic surface mount package (smp) small size dimensio ns: 19.00 x 6.50 x 1.75mm hermetically sealed rohs compliant, pb - free g eneral description pin configuration the 854652 is a high - performance if saw filter with a center frequency of 70 mhz and a 3 db bandwidth of 1.1 mhz. it features low loss with excellent attenuation, and is designed to be used with a single ended input and output. this device is rohs compliant and pb - free. pin # se description 10 input 5 output 1,6 ground 2,3,4 ,7,8,9 case ground ordering info rma tion part no. description 85 4652 packaged part 85 4652 - evb evaluation board standard t/r size = 2000 units/ reel. 10 9 8 7 6 5 4 3 2 1 input gnd output gnd gnd gnd gnd gnd gnd gnd
8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 2 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? specifications electrical specifications (1) specified t emperature range: (2) + 2 5 oc parameter (3) conditions min typical (4) m ax units center frequency 69.92 70 70.08 mhz insertion loss at 70 mhz - 7.3 8 db 1.0 db band width (5) 0.7 0.8 - mhz 3 .0 db band width (5) 1.0 1.1 - mhz 40 .0 db band width (5) - 2.8 3.0 mhz passband ripple (6) (60% of 3 db bandwidth ) - 0.7 1.0 db p - p phase linearity - 9.0 11.95 deg p - p group delay variation (60% of 3 db bandwi d th) - 375 500 ns p - p absolute group delay - 2.1 - s temperature coef f icient - - 23 - ppm/ oc source impedance (single - ended) ( 7 ) - - 50 - load impedance (single - ended) ( 7 ) - - 50 - notes: 1. all specifications are based on the triquint schematic for the main reference design shown on page 3 2. in production, devices will be tested at room temperature to a guardbanded specification to ensur e electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tol erances 4. typical values are based on average measurements at room temperature 5. relative to i nsertion loss at center frequency 6. passband ripple is defined as the worst case difference between a peak and an adjacent valley within defined frequency points 7. this is the optimum impedance in order to achieve the performance show n absolute maximum rat ings parameter rating operating temperature +25 o c storage temperature - 40 to +85 o c input power (at +55 c for 100 hours max) +10dbm operation of this device outside the parameter ranges given above may cause permanent damage.
8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 3 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? refer ence design C 50 se input, 50 se output schematic 50 single - ended input 2 50 single - ended output notes: 1. actual matching values may vary due to pcb layout and parasitic s pc board mounting configuration notes: t op, middle & bottom layer s : 1 oz copper substrat es: fr4 dielectric, .031 thick 1. all dimensions are in millimeters. 2. this footprint represents a recommendation only. bill of m aterial reference des g. value description manufacturer part number l1 120 nh coil wire - wound, 0 80 5 , 5% coilcraft 0805cs - 121xjlc l2 1 10 nh coil wire - wound, 0805 , 5% coilcraft 0805 cs - 111xjlc c1 100pf coil wire - wound, 0805, 5% murata grm40cog101j50v c2 22 pf coil wire - wound, 0805 5% murata grm40cog220j50v sma n/a sma connector radiall usa inc. 9602 - 1111 - 018 pcb n/a 3 - layer multiple 960656 1,2,3,4, 6,7,8,9 50 100pf 120nh 22pf 10 5 110nh 50 960656 xxxxxx sawtek 854652 l1 l2 c1 c2 2.51 6.70 8.86 .69 1.22 2.00
8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 4 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? typical performance (at room temperature)
8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 5 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? mechanical information package information, dime nsions and marking package style: smp - 75 dimensions: 1 9. 00 x 6.50 x 1. 75 mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 - 6m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm the date code consists of: day of the current year (julian, 3 digits), last digit of the yea r (1 digit) and m= manufacturing code tape and reel information standard t/r size = 2000 units/reel. all dimensions are in millimete rs date code id dot r0.51 1.91 2.31 1.02 1.80 0.76 19.0 6.50 1.75 nom. 1.96 max. xxxxxx sawtek 854652 id dot direction of travel ?330 ?102 2.7 ?13.0 ?20.2 2.0 32.8 ?1.5 12.0 2.3 4.0 0.3 2.0 0.20 section a-a 7.1 19.6 r0.75 1.75 ?1.5 14.2 28.4 32.0 a a
8 54652 70 mhz saw filter data sheet: rev a 4 / 0 7 /1 1 - 6 of 6 - disclaimer: subject to change without notice e ? 201 1 triquint semiconductor, inc. connecting the digital world to the global network ? product compliance information esd information esd rating: 2 value: passes 2100 v min. test: human body model (hbm) standard: jedec standard jesd22 - a114 esd rating: c value: passes 600 v min. test: machine model (mm) standard: jedec standard jesd22 - a115 solderability compatible with th e latest version of j - std - 020, l ead free solder, 260 c refer to soldering profile for recommended guidelines. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and elec tronic equipment). this product also has the following attributes: halogen free (chlorine, bromine) antimony free tbbp - a (c 15 h 12 br 4 0 2 ) free pfos free svhc free msl rating de vices are hermetic, therefore m s l is not applicable . contact information f or the latest specifications, additional product information, worldwide sales and distribution locations, and information abo ut triquint: web: www.triquint.com tel: +1. 407 . 886 . 8860 email: info - sales@tqs.com fax: +1. 407 . 886 . 7061 for technical questions and application information: email: applications.engineering@tqs.com important notice the information contained h erein is believed to be reliable . triquint makes no warranties regarding the information contain herein . triquint assumes no responsibility or liability whatsoever for any of the information contained her ein. triquint assumes no responsibility or liabil ity whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely wi th the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or impl icitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. caution! esd - sensitive device
|
