1-29 dialight corporation 1501 route 34 south farmingdale, nj 07727 tel: (732) 919-3119 fax: (732) 751-5778 www.dialight.co m 1 solder adherence per mil-std-202e, method 208c s u r f a c e m o u n t l e d r i g h t a n g l e t y p e p a c k a g e 5 9 7 - 2 x x 1 - 4 x x 2.0 [.079] 2.0 [.079] 1.0 [.039] clear epoxy lens substrate glass fiber laminate direction of light led die 3.0 [.118] 2x .30 [.012] 1.00 [.039] pwb center .90 [.036] .20 [.008] 2.0 [.079] 5.0 [.197] direction of light anode mechanical soldering reinforcemen t pad cathode cathode identification mark 2x .25 [.010] .88 [.035] p a r t n o . * c o l o r 597-2002-4xx red 597-2111-4xx red 597-2201-4xx orange 597-2212-4xx orange 597-2222-4xx green 597-2311-4xx green 597-2401-4xx yellow dimensions in mm[inches] * o r d e r i n g i n f o r m a t i o n 5 9 7 - 2 x x 1 - 4 x x packaging option 02 20 pieces on tape 07 7" reel, 3000 pcs/reel red red orange orange amber green yellow absolute maximum ratings (t a =25c) - 2 2 0 2 - 2 1 1 1 - 2 2 0 1 - 2 2 1 2 - 2 2 2 2 - 2 3 1 1 - 2 4 0 1 power dissipation (mw) 81 57.5 70 81 81 70 70 forward current (ma) 25 25 25 25 25 25 25 derating (ma/c) above 25c .43 .36 .36 .43 .43 .36 .36 peak current (ma) 30 60 60 30 30 60 60 pulse width = 100 s 100 ` 100 100 operating temperature (c) -40/+85 -30/+85 -30/+85 -40/+85 -40/+85 -30/+85 -30/+85 storage temperature (c) -40/+100 -40/+100 -40/+100 -40/+100 -40/+100 -40/+100 -40/+100 soldering temperature 260c, 5 seconds max red red orange orange amber green yellow operating characteristics (t a =25c) - 2 2 0 2 - 2 1 1 1 - 2 2 0 1 - 2 2 1 2 - 2 2 2 2 - 2 3 1 1 - 2 4 0 1 luminous intensity (mcd) min. 16 6.2 1.5 16 16 2.6 1.5 i f =20ma typical 50 12.4 3 65 65 5.2 3 peak wavelength (nm) typical 630 660 605 609 592 560 580 peak viewing angle (2 1/2 ) typical 130 130 130 130 130 130 130 forward voltage (v) typical 1.9 1.7 2.2 1.9 1.9 2.1 2.2 i f =20ma max. 2.4 2.3 2.8 2.4 2.4 2.8 2.8 reverse current ( a) max 100* 100 100 100 100* 100 100 (v r = 4v) *(v r = 5v) 1 1 / / 2 2 is the off axis angle at which the luminous intensity is half the axial luminous intensity ? f e a t u r e s compatible with automatic placement equipment compatible with infrared reflow processes packaged on 8mm tape, 7" reels (meets eia-481-1 standard) helps to eliminate mixed technology pc board processing 4.0 .1 [.157 .004] cathode ? 1.5 .1 [.059 .004] typ 3.50 .05 [.138 .002] 8.0 .2 [.315 .008] 2.30 [.091] 4.0 .1 [.157 .004] feed direction 1.75 .10 [.069 .004] t a p i n g s p e c i f i c a t i o n s
|