design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. electric double layer capacitors (gold capacitor) p 0 f d 0 p 1 f p 2 p 5.40.8 f d h 1 13.4 max. h 0 w w 1 w 2 w 0 h ? + ? + h 1 10.5 max. stacked coin type series : se dimensions in mm(not to scale) characteristics list (unit : mm) endurance : +70 c 1000 h automatic insertion available rohs compliant memory back-up for video and audio equipment,cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. +0.8 ?0.2 dimensions nominal tolerance 0 d 0.55 0.05 p 0 12.7 0.2 f 5.0 w 18.0 0.5 w 0 5.5 < ? w 1 9.0 0.5 w 2 0 to 3.0 ? h 0 16.4 0.5 0 d 0 4.0 0.2 p 12.7 1.0 p 1 3.85 0.50 p 2 6.35 1.00 h, h 1 0 1.0 h 1 30.3 > ? features recommended applications specifi cations category temp. range ?25 c to +70 c maximum operating voltage 5.5 v.dc nominal cap.range 0.22 f characteristics at low temperature capacitance change 30 % of initial measured value at +20 c (at ?25 c) internal resistance < 5 times of initial measured value at +20 c (at ?25 c) endurance after 1000 hours application of 5.5 v.dc at +70 c, the capacitor shall meet the following limits. capacitance change 30 % of initial measured value internal resistance < 4 times of initial speci? ed value shelf life after 1000 hours storage at +70 c without load, the capacitor shall meet the speci? ed limits for endurance. note: 1. when ordering please observe the minimum packaging quantity. 2. when the surface mount component goes through uv or a heat oven to af? x the adhesive glue, the capacitor?s surface temperature should not exceed 100 c for more than 60 seconds (maximum tem per a ture should not exceed 105 c) 3. do not use re? ow soldering. (ir, atmosphere heating methods, etc.) please refer to the page of ?application guidelines?. maximum op er at ing volt age (v.dc) capacitance (f) capacitance tolerance (f) internal resistance (initial speci? ed value) ( ) at 1khz recommended discharge current (a) part number mass (reference value) (g) min. packaging q?ty (pcs) 5.5 0.22 0.176 to 0.396 < 75 300 or less EECSE0H224 1.0 1000 jan. 2016 05
|
