designed & dimensioned in millimeters[inches] do not scale from this print "e" ref 3.35 .132 ref 1.32 ref .052 "a" "a" erf8-xxx-xx.x-dv-01 (see table 3) (see sht 2, table 4) "b" ref 3.36 .132 ref 5.60 .220 ref (see sht 2, table 4) "a" ref "c" (see sht 2, table 4) 0.800 (typ) .0315 (tol. non-accum) 02 60 59 01 c position #1 indicator c c erf8-xxx-xx.x-x-dv-xxxx-tr no of positions (per row) plating specification -l: 10" selective gold in contact area, matte tin on tail (use c-211-xx.x-l) -s: 30" selective gold in contact area, matte tin on tail (use c-211-xx.x-s) -dv: double vertical row specification option -005, -010, -011, -013, -020, -023, -025, -030, -035, -040, -049, -050, -060, -070, -075,-100 -k: polyimide film pad (see fig 2) -l: latches (-05.0 lead style only, see note 5, see fig 5) -egp: extended guide post (see note 6, see fig 3) -egps: extended guide post shield (only available in ***-10.0 lead style and only -10, -20, -25 & -30 positions see fig 6) -l2: latch with long weld tab (-05.0 & -07.0 lead style only, see fig 5) -e: extended guide post with long weld tab, see fig 3) -w: weld tab (-05.0 & -07.0 lead style only, see fig 10) -05.0 = 5mm -07.0 = 7mm **-10.0 = 10mm lead style af ** = not tooled *** = not released for production (-100 position available in -05.0 only see note 9) 1.50 .059 ref 0.800 (typ) .0315 (tol non-accum) "d" ref (see sht 2, table 4) (ref) "n" 0.23 .009 ref (see sht 2, table 4) "c" 3 max sway (typ) 'd' c l c c c l 5.40 ref .213 2.58 0.12 .101 .005 5.41 0.25 .213 .010 1.04 ref .041 (2 plcs) 1.24 ref .049 "f" (typ) (see sht 2, table 5) 0.90 ref .036 section "a"-"a" scale 5 : 1 c c-211-xx.x-x (see table 3) 0.50 [.020] x 45 ref c l c c c see table 1 1.32 .052 ref 1.10 .043 ref detail 'd' scale 4 : 1 c fig 1 (erf8-030-05.0-x-dv-xx shown) (center features removed for clarity) tape & reel (standard packaging) (not available in 100 pos) (see note 4 & 7) *** *** *** af sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.13 [.005] x.xxx: 0.050 [.0020] material: 0.8mm edge rate socket assembly by: erf8-xxx-xx.x-x-dv-xxxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 9/26/2005 6 1 sheet scale: 2:1 insulator: lcp, color: black contact & latches: becu shield: phos bronze f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: 0.038[.0015] max. 3. minimum pushout force: 2.22 n [.5 lb.] 4. for quantities up to 49 pieces, no leader, trailer, or eia-481-d reel will be supplied. for quantities of 50-124 pieces, no leader, trailor will be supplied. 5. not available with -egp, -e, -w, -l2 or -egps options. 6. option only available on -07.0 lead style. 7. -tr packaging not available on 100 position only available in trays. 8. note deleted. 9. not available with -l, -l2, -e, or -w options. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision af
6.00 .236 0.50[.020] "h" c l c l fig 2 -k option (use k-500-300) (erf8-030-xx.x-x-dv-k shown) "g" 0.20 - 0.2 + 0.5 (typ) .008 - .008 + .020 3 max sway (typ) c-211-xx.x-x in-process view c 0.11 0.076 .004 .003 "c" "c" 5.10 .201 ref 1.90 .075 ref "j" ref (see sht 3, table 6) 1.03 .040 ref 7.00 .276 ref (see sht 3, table 6) "l" 2 max sway (typ) section "c"-"c" scale 2.5 : 1 c wt-30-xx-t (see table 3) c see table 3 7.25 .285 ref "t" "u" c fig 3 -e and -egp option (erf8-030-07.0-x-dv-egp shown) (same as fig 1, except as shown) (available on -07.0 lead style only) (center features removed for clarity) (** = not tooled) c c c sheet of 0.8mm edge rate socket assembly by: erf8-xxx-xx.x-x-dv-xxxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 9/26/2005 6 2 sheet scale: 2:1 f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw revision af 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"j" ref "k" 0.25 "b" "b" "e" c l c 0.25 ref .010 "l" 2 max sway (typ) 'g' section "b"-"b" scale 3 : 1 c l c c wt-30-xx-f (see sht 2, table 3) 2.10 .083 ref detail 'g' scale 6 : 1 0.64 .025 ref "u" "t" 2.50 .098 c l c 6.00 .236 0.50[.020] "m" c l c l c 0.80 .031 detail "e" scale 6 : 1 c l fig 5 (erf8-025-05.0-x-dv-k-l shown) (same as fig 1 & 2, except as shown) (center features removed for clarity) c af sheet of 0.8mm edge rate socket assembly by: erf8-xxx-xx.x-x-dv-xxxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 9/26/2005 6 3 sheet scale: 2:1 f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw revision af 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
(see sht 2, table 3) "u" ref 0.64 .025 ref 6.200 .2441 6.80 .268 7.20 ref .283 (see sht 2, table 3) "t" c c l c 5.95 .234 ref c l c l c l 7.00 .276 ref 6.25 .246 "r" ref 0.64 .025 ref (typ) "s" ref "p" sh29-xx-xx-x (see sht 2, table 3) c l c "f" "f" c l "q" 0.25 .010 ref 2 max sway (typ) section "f"-"f" erf8-xxx-07.0-dv-egps (see sht 2, table 3) c l c c fig 6 (erf8-030-07.0-x-egps shown) (same as fig 3, except as shown) (available on -07.0 lead style only) (center features removed for clarity) sheet of 0.8mm edge rate socket assembly by: erf8-xxx-xx.x-x-dv-xxxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 9/26/2005 6 4 sheet scale: 3:1 revision af f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"d" ref (see sht 2, table 4) "j" ref (see sht 3, table 6) "h" "h" "j" "j" fig 7 (**erf8-030-10.0-x-dv shown) (center features removed for clarity) ** not tooled 2.58 0.12 .101 .005 5.40 ref .213 1.24 ref .049 "f" 5.41 - 0.13 + 0.18 .213 - .005 + .007 "e" 1.04 .041 ref section "h"-"h" c erf8-xxx-05.0-dv-s erf8h-xxx-05.0-dv c-314-01.0-x c c see sht 1, table 1 "l" (see sht 3, table 6) 2.10 ref .083 "k" "k" c fig 8 -egps options (**erf8-030-10.0-x-dv-l shown) (same as fig 7, except as shown) ** not tooled section "j"-"j" wt-67-02-x (2 plcs) 0.64 ref .025 0.80 .031 0.94 .037 ref section "k"-"k" wt-67-01-x (2 plcs) fig 9 (**erf8-030-07.0-x-dv-l shown) (same as fig 5, except as shown) (center features removed for clarity) ** not tooled wt-30-03-f sheet of 0.8mm edge rate socket assembly by: erf8-xxx-xx.x-x-dv-xxxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 9/26/2005 6 5 sheet scale: 2:1 revision af f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"j" ref "l" "l" c l c section "l"-"l" scale 3 : 1 wt-30-05-x (see table 3) -05.0 shown -07.0 shown -07.0 with egp shown -07.0 with egps shown **-10.0 with -l shown 't' (see sht 2, table 3) 'u' ref (see sht 2, table 3) fig 10 (erf8-025-05.0-x-dv-w shown) (same as fig 5 except as shown) (center features removed for clarity) c sheet of 0.8mm edge rate socket assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 6 6 sheet scale: 2:1 revision af f:\dwg\misc\mktg\erf8-xxx-xx.x-x-dv-xxxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 erf8-xxx-xx.x-x-dv-xxxx-tr 9/26/2005
|
