series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 1 of 6 north america only features: models single output model max output power (w) output voltage range (v) output current ( a) input voltage (vac/hz) efficiency (%) ame r60 - 42130 z 54.6 24 - 42 1 . 3 90 - 305 /47 - 63 8 9 amer 6 0 - 42140 z 58 .8 24 - 42 1 . 4 90 - 305 /47 - 63 89 amer60 - 42150z 63 .0 24 - 42 1 . 5 90 - 305 /47 - 63 90 amer60 - 42160z 67.2 24 - 42 1 . 6 90 - 305 /47 - 63 90 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity <75%, nominal input voltage and at rated output load unless otherwise specified. i nput specifications parameters conditions typical maximum units input current 90 vac, full load 1.0 arms inrush current <2ms 115 vac, cold start 40 a 277 vac, cold start 60 leakage current 0.75 ma input dissipation no load 1.0 w output short 4.5 w power factor 115 vac, full load 0.98 277 vac, full load 0.9 2 input fuse 2a / 300vac start - up time 115 vac, full load 1.5 sec. 277 vac, full load 1 .0 sec. output specifications parameters conditions typical maximum units current accuracy 5 % line regulation l l to h l 3 % load regulation full output voltage range 5 % ripple & noise full load 3 v p - p output current ripple full load , 16.7 - 20 ms duration 1 . 8 a p - p current overshoot l l to h l , full load at cold start, % of rated output current 10 % hold - up time (min) 0 m s minimum load voltage see models table above isolation specifications parameters conditions typical rated units tested i/o voltage i/p C o/p 3750 vac i/p C fg 2000 o/p C fg 500 isolation resistance i/p C o/p, 500vdc >100m v ac isolation capacitance 2500 pf ? universal input: 90~305 vac ? ip65/67 design for outdoor application ? high efficiency: up to 90 % ? long life, high reliability ? active power factor correction ? meet ul, ce safety requirement ? short circuit / open circuit protection ? 5 - year limited warranty
series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 2 of 6 north america only general specifications parameters conditions typical maximum units switching frequency 150 khz over voltage protection 50 v dc over current protection constant current mode short circuit protection hiccup mode short ci rcuit restart auto recovery open circuit protection hiccup mode operating temperature with derating over o c - 4 0 to + 6 0 o c storage temperature - 4 0 to + 90 o c maximum case temperature 90 o c t emp era ture coefficient 0.0 3 % / o c cooling free air convection humidity 90 % rh c ase material metal (aluminum) potting material polysiloxane ip rating ip67 weight 460 g dimensions (l x w+ x h ) 6.89 x 1.91 x 1.31 inches 175.0 x 48.6 x 33.3 mm mtbf 400000 hrs (mil - hdbk - 217f at +25c) safety specifications parameters standards electromagnetic interfere nce en55015 / fcc part 15 , class b harmonic current emissions en61000 - 3 - 2, class b voltage fluctuations and flicker en61000 - 3 - 3 electrostatic discharge immunity en61000 - 4 - 2, 8kv air, 4kv contact, level 3, criteria a rf, electromagnetic field immunity en61000 - 4 - 3, test - rs level 3, criteria a electrical fast transient / burst immunity en61000 - 4 - 4, burst eft level 3, criteria a surge immunity en61000 - 4 - 5, line to neutral 4 kv , line/neutral to fg 6kv rf, conducted disturbance immunity en61000 - 4 - 6. test - cs level 3, criteria a power frequency magnetic field immunity en61000 - 4 - 8, test 3a/m, criteria a voltage dips, short interruptions immunity en61000 - 4 - 11, criteria b electromagnetic immunity requirements applies to lighting equipment en61547 pin definition application block diagram wire connection brown ac l blue ac n yellow/green fg red +v output black - v output ac _ l ac _ n led + led - ac fg
series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 3 of 6 north america only dimensions efficiency vs. input voltage & output v oltage amer60 - 42130z 65.00% 70.00% 75.00% 80.00% 85.00% 90.00% 95.00% 24 27 30 33 36 39 42 efficiency output voltage(v) 115vac 230vac 277vac
series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 4 of 6 north america only amer60 - 42140z amer60 - 42150z amer60 - 42160z 65.00% 70.00% 75.00% 80.00% 85.00% 90.00% 95.00% 24 27 30 33 36 39 42 efficiency output voltage(v) 115vac 230vac 277vac 65.00% 70.00% 75.00% 80.00% 85.00% 90.00% 95.00% 24 27 30 33 36 39 42 efficiency output voltage(v) 115vac 230vac 277vac 65.00% 70.00% 75.00% 80.00% 85.00% 90.00% 95.00% 24 27 30 33 36 39 42 efficiency output voltage(v) 115vac 230vac 277vac
series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 5 of 6 north america only pf v s. input voltage & output v oltage amer60 - 42130z amer60 - 42140z amer60 - 42150z 0.000 0.300 0.600 0.900 1.200 24 27 30 33 36 39 42 pf output voltage(v) 115vac 230vac 277vac 0.000 0.300 0.600 0.900 1.200 24 27 30 33 36 39 42 pf output voltage(v) 115vac 230vac 277vac 0.000 0.300 0.600 0.900 1.200 24 27 30 33 36 39 42 pf output voltage(v) 115vac 230vac 277vac
series am er60 - z up to 1600 ma | a c - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec ( 924 6832) f 052.1e r 4 6 of 6 north america only amer60 - 42160z note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety age ncy certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4 . all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5 . aimtec may not hav e conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary and may not be available for release. 6 . this produc t is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet . 7 . warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com . 0.000 0.300 0.600 0.900 1.200 24 27 30 33 36 39 42 pf output voltage(v) 115vac 230vac 277vac
|
