www.roithner - laser.com 1 cw 532 - 0 1 0 f ? green dpss laser module ? 532 nm , 1 0 mw ? focusable acryl lens ? automatic power control ? 3 vdc input voltage ? ir filter d escription cw 532-0 1 0 f is a compact size focusable diode pumped solid state (dpss) nd:yvo4+ktp laser module with a typical emission wavelength of 532 nm , and an optical output power of 1 0 mw . it features automatic power control (apc) driving el ectronics for stable operation, an ir filter to block residue ir radiation, and is designed for 3 vdc supply voltage . cw 532- 0 1 0 f comes equipped with a coaxial power connector. a matching power supply is optionally available for quick setup and convenient operation (see page 3 for details) . maximum rating s (t case = 25c) parameter values unit min. max. operating t emperature + 15 + 30 c storage t emperature - 2 0 + 80 c electro - optical characteristics (t case = 25c ) parameter values unit min. typ. max. peak wavelength 531 532 533 nm radiated power 1 0 mw beam diameter at a perture 1.5 mm transverse m ode tem 00 warm up time < 3 s operating current 2 00 ma supply voltage 2.2 3 3.2 vdc material b ody b rass material l ens acryl dimensions ? 13 x 3 7 ( 5 5 ) mm connector iec 60130 - 10, type a, 5.5/2.1 mm mttf 3000 h rev . 2 . 0 18.1 1 .15
www.roithner - laser.com 2 outline dimensions a ll dimensions in mm electrical connection (iec 60130 - 10, type a, 5.5/2.1 mm) precautions static electricity: precautions against electrostatic discharge (esd) must be taken when handling or operating the module. surge voltage or electrostatic discharge can result in complete failure of the laser diode . heat sinking : in order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. for long time stable operation proper contact between laser module and heat sink is mandatory. safety: this laser module emits highly concentrated visible light which can be hazardous to the human eye and skin . it is classified as class 3b laser product according to iec 60825 -1 and 21 cfr part 1040.10 safety standards . actual laser light emitted and precautions necessary strongly depend on mode of operation. 37 .0 1 8 .0 ?13 .0 ?4 .0 + vdc gnd ?12.0
www.roithner - laser.com 3 accessories laser power supply lps3 1 ? 110- 230 vac universal input voltage ? small ripple (<80 mv) ? ac europlug (cee7/16) ? on/off switch ? iec 60130 - 10 type a connector ? output 3 vdc, max. 1 a ? all rights reserved the above specifications are for reference purpose only and subjected to change without prior notice
|
