b91 3.96mm pitch connector directly mounted on board df6 series features 1. service efficiency up conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. this product enhances soldering service efficiency. 2. miniaturization this product achieves miniaturization for thick cables. mounting height on board : 7.5mm width : 5.0mm 3. board prefixed mechanism since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. applications secondary power supply units for various equipment prefixed mechanism height: 7.5mm width: 4.6mm
b92 rating current rating (note 1) voltage rating awg 18 : 5a cable size awg 20 : 4a awg 22 : 3a 300v ac operating temperature range operating moisture range storage temperature range storage humidity range -35 to + 85 ? (note 1) 20 to 80% -10 to + 60 ? (note 2) 40 to 70% (note 2) note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note: hrs's tin plating process takes measures against whisker. item specification condition 1.insulation resistance 1000m ohms min. 500v dc 2.withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3.contact resistance 15m ohms max. 100ma 4.vibration no damage, cracks, or parts looseness. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) no damage, cracks, or parts looseness. 96 hours at temperature of 40? and humidity of 90% to 95% 6.temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 7. resistance to soldering heat no deformation of components affecting performance. flow: 250? for 10 seconds manual soldering: 300? for 3 seconds product part material finish remarks crimping plug insulator polyamide white ul94v-0 crimping contact for plug brass copper alley tin plated ________ * oo3oo4(*oo qe wrt r contact pitch: 3.96mm t c: crimping plug q series name : df 6 w number of contacts: 1 ~ 8, 10 e connector type p: plug qwe e packaging type pcf: plug contact, reel packaging sc: plug contact, bag packaging q applicable cable type none: ul 1007 a: ul 1015 w applicable cable size 1822: awg#18~#22
b93 precrimping plug photo: contact inserted crimping contact part number cl no. number of contacts ab df6- 1p-3.96c 546-0001-1 1 4.92 _____ df6- 2p-3.96c 546-0002-4 2 8.88 3.96 df6- 3p-3.96c 546-0003-7 3 12.84 7.92 df6- 4p-3.96c 546-0004-0 4 16.80 11.88 df6- 5p-3.96c 546-0005-2 5 20.76 15.84 df6- 6p-3.96c 546-0006-5 6 24.72 19.80 df6- 7p-3.96c 546-0007-8 7 28.68 23.76 df6- 8p-3.96c 546-0008-0 8 32.64 27.72 df6-10p-3.96c 546-0011-5 10 40.56 35.64 applicable cable part number cl no. packaging type quantity a b c ul style jacket dia. awg size contact construct df6 -1822pcf 546-0009-3 reel 5,000 1007 1.5 to 2.2mm awg 18 34 cores/0.18mm 10.2 1.5 1.2 df6 -1822pc 546-0010-2 bag 100 awg 20 21 cores/0.18mm df6a-1822pcf 546-0013-0 reel 3,000 1015 2.2 to 2.9mm awg 22 17 cores/0.16mm 10.5 1.7 1.4 df6a-1822pc 546-0014-3 bag 100 typeitem part number cl no. applicable contact applicator ap105-df6-1822p 901-4505-9 df6 -1822pcf ap105-df6a-1822p 901-4520-2 df6a-1822pcf press unit cm-105 901-0005-4 ________ manual crimping df6 -ta1822hc 550-0174-9 df6 -1822pc tool df6a-ta1822hc 550-0222-0 df6a-1822pc extraction tool df-c-po(a) 550-0170-8 df6/df6a-1822pc(f) contact view for insertion note: a packaging quantity is delivered by the bag unit (100 pcs.). note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hirose sales department. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose never guarantee any product s. slip length df6-1822pc (f): 2.1mm to 2.6mm df6a-1822pc (f): 2.3mm to 2.8mm applicable through-hole: 1.8 +0.15 0 b applicable crimping tools
b94 b precautions 1.recommended soldering condition 2.cleaning condition 3.connecting condition flow: 250? for 3 seconds manual soldering: 290? for 2 seconds after soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. after soldering, the operation should be performed, after connector returns to room temperature. refer to the "nylon connector use hand book". don't use solvent to degrade the cable jacket like trichloroethane. in addition, avoid heat cleaning with solvent. refer to the "nylon connector use hand book".
|
