1/3 www.rohm.com c 2009 rohm co., ltd. all rights reserved. 2009.10 - rev.b thick film thermal printhead (300dpi) KD3004-DC10A KD3004-DC10A is developing type of gl40 series which are developed mainly for label printers. we have adopted low coefficient of abrasi on and conductive protection coat to gl40 se ries which are possible for high speed and good printing quality. that is KD3004-DC10A which is 24v standard thick film thermal print head with high speed, high quality of printing, high durability, long life, and strong resistance to abrasion. z applications high speed label printer food label printer high speed ticket printer high speed terminal printer z features 1) perform 150km life time adopting new protective coat. (perform three times life time by coefficient of abrasion wh ich is about is about 1/10 of current mass-producing coat.) 2) build in thermal high speeded heater and perform high printing 4 ips. (100mm / s) 3) available for thermal transfer printing by adopting specific partial glaze. z dimensions (unit : mm) jst b6ps-vh hirose hif3fc-20pa-2.54ds (19) 150.3 15.30.317.80.2 7.30.3 800.3 3-m3(effective depth 3) 950.3 (20.8) 250.5 (effective depth 3) 3h10 length 4 14.2080.2 (effective depth 3) 3h10 40 0.3 118 max. 20 max.5.5 dot #1 dot #1280 (4.792) (3) max.36 max.45 #1 #6 #20 #19 #2 #1 max.10 (5) 6.10.4 type of printhead 108.416(effetive print width) downloaded from: http:///
2/3 www.rohm.com c 2009 rohm co., ltd. all rights reserved. 2009.10 - rev.b data sheet KD3004-DC10A z inner circuit vh latch register thermistor30k ? b : 3950k connector #385 #640 #384 #1 gnd v dd /lat clk di4 do4 di1 s tb2 s tb3 s tb4 s tb1 vsf #641 #896 #897 #1280 shift register shift register shift register shift register do1 tmtm di3 do3 di2 do2 dot #1280 dot #1 di no. di1 1 to 384 1 to 384 385 to 640641 to 896 897 to 1280 385 to 640641 to 896 897 to 1280 di2di3 di4 dot no. stb no. stb1stb2 stb3 stb4 dot no. fig. 1 l/s vsf : usually vsf and vh are connected. when measuring r value of heat-element , vsf and vh should be separated. z pin configuration tmtm di3 do3 di2 do2 stb2stb1 di1 do1 vhvh vh gndgnd gnd 1112 13 14 15 16 17 18 19 20 no. circuit no. 12 3 4 5 6 circuit gnd vsf gnd v dd stb4 clk di4 do4 stb3 lat no. 12 3 4 5 6 7 8 9 10 circuit connector a connector b downloaded from: http:///
3/3 www.rohm.com c 2009 rohm co., ltd. all rights reserved. 2009.10 - rev.b data sheet KD3004-DC10A z timing chart c lock (clk) max.10 s min.300ns min.50ns min.200ns min.10ns min.30ns min.30ns max.120ns min.100ns max.10 s d ata in (di) " high" : black " low" : white d ata out (do) " high" : black " low" : white l atch (lat) s trobe (stb) d river out fig.2 " high" : hold " low" : through z characteristics effective printing widthdot pitch total dot number average resistance value applied voltage applied power print cycle maximum number of dots energized simultaneously maximum clock frequency maximum roller diameter running life / pulse life operating temperature parameter rave v h p o slt 108.420.0847 12801000 24 0.510.83 1280 12 20.0 150 / 1 10 8 5 to 45 mmmm dots ? v w / dot ms dots mhz mm km / pulses c symbol typ. unit z data sheet 0 0.50 0.10 0.15 0.20 0.25 0.30 0.35 0.40 02 2 .5 0.5 1 1.5 slt : (ms / line) energy : (mj / dot) fig.3 maximum energy curve 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.1 8 energy : (mj / dot) o.d fig.4 representative density curv e speed : 4ips fig.5 thermistor curve 0 20 40 60 80 100 120 140 160 180 20 10 10 30 50 7 0 02 04 06 0 temperature : (?c) resistance : ( k ? ) downloaded from: http:///
r0039 a www.rohm.com ? 2009 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in who le, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without not ice. the content specied herein is for the purpose of introducing rohm's prod ucts (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specicatio ns, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other inf ormation contained herein illustrate the standard usage and operations of the products. the periphe ral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in t his document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typic al functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or oth er rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispu te arising from the use of such technical information. the products specied in this document are intended to be used with g eneral-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment , commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolera nt. while rohm always makes efforts to enhance the quality and reliability of its pro ducts, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to g uard against the possibility of physical injury, re or any other damage cause d in the event of the failure of any product, such as derating, redundancy, re control an d fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of th e prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or ma lfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medic al instrument, transportation equipment, aerospace machinery, nu clear-reactor controller, fuel-controller or other safety device). rohm shall bear no res ponsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used fo r any such special purpose, please contact a rohm sales representative befor e purchasing. if you intend to export or ship overseas any product or technology specied h erein that may be controlled under the foreign exchange and the foreign trade law, you w ill be required to obtain a license or permit under the law. downloaded from: http:///
|
