page 1 of 3 dc/dc converters thd 10n series, 10 watt ul 60950-1 order code input voltage output voltage output current effciency typ. range max. thd 10-1210n 3.3 vdc 2700 ma 86 % thd 10-1211n 5.1 vdc 2000 ma 85 % thd 10-1212n 9 C 18 vdc 12 vdc 833 ma 88 % thd 10-1213n (12 vdc nominal) 15 vdc 666 ma 89 % thd 10-1222n 12 vdc 416 ma 88 % thd 10-1223n 15 vdc 333 ma 89 % thd 10-2410n 3.3 vdc 2700 ma 86 % thd 10-2411n 5.1 vdc 2000 ma 85 % thd 10-2412n 18 C 36 vdc 12 vdc 833 ma 89 % thd 10-2413n (24 vdc nominal) 15 vdc 666 ma 89 % thd 10-2422n 12 vdc 416 ma 88 % thd 10-2423n 15 vdc 333 ma 89 % thd 10-4810n 3.3 vdc 2700 ma 86 % thd 10-4811n 5.1 vdc 2000 ma 85 % thd 10-4812n 36 C 75 vdc 12 vdc 833 ma 87 % thd 10-4813n (48 vdc nominal) 15 vdc 666 ma 88 % thd 10-4822n 12 vdc 416 ma 87 % thd 10-4823n 15 vdc 333 ma 88 % models features wide 2:1 input voltage range internal emi-flter meets en 55022, class a without external components high effciency up to 89% operating temperature range C40c to +85c no minimum load required i/o isolation 1500 vdc overload protection 3-year product warranty the thd 10n series is designed for an optimized cost/performance ratio of dc/dc converters with output power of 10 watt. they come with an internal emi-flter to meet en55022, class a without external components. general features like no minimum load requirement, overload protec - tion and high effciency make these converters easy to design in. with the popular dip-24 standard package they are also a drop in replacement for many cost critical applications. http://www.tracopower.com pending
page 2 of 3 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. dc/dc converters thd 10n series 10 watt input specifications input current at no load 12 vin models: 20 ma typ. 24 vin models: 15 ma typ. 48 vin models: 10 ma typ. start-up voltage / under voltage shut down 12 vin models: 9 vdc / 8.5 vdc (or lower) 24 vin models: 18 vdc / 17 vdc (or lower) 48 vin models: 36 vdc / 34 vdc (or lower) surge voltage (1 sec. max.) 12 vin models: 25 v max. 24 vin models: 50 v max. 48 vin models: 100 v max. conducted noise en 55022 class a without external components esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 10 v/m, perf. criteria a fast transient / surge en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 1 kv perf. criteria a with external capacitor chemi-con ky 220 f, 100 v conducted immunity en 61000-4-6, 10 vrms, perf. criteria a output specifications voltage set accuracy 2 % max. regulation C input variation vin min. to vin max. 1.0 % max. C load variation 0 C 100 % single output models: 1.2 % max. dual output models balanced load: 2.0 % max. minimum load not required temperature coefficient 0.02 %/k ripple and noise (20 mhz bandwidth) 100 mvp-p typ. transient recovery time (25% load step change) 300 s response time typ. transient response deviation (25% load step change) 5 % max. short circuit protection hiccup, automatic recovery over load protection 150 % of iout max. typ. capacitive load 3.3 & 5.1 vdc models: 1000 f max. 12 vdc models: 470 f max. 15 vdc models: 330 f max. 12 vdc models: 220 f max. (each output) 15 vdc models: 150 f max. (each output) general specifications temperature ranges C operating (natural convection 20 lfm) C40c to +85c C case temperature +105c max. C storage C50c to +125c derating 2.9 %/k above +70c humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) > 1 mio h isolation voltage (input/output 60 sec., rated) 1500 vdc isolation capacitance (input/output , 100 khz, 1 v) 1500 pf max. isolation resistance (input/output, 500 vdc) >1000 m ohm http://www.tracopower.com
page 3 of 3 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com dc/dc converters thd 10n series 10 watt outline dimensions pin single dual 1 remote on/off remote on/off 2 Cvin (gnd) Cvin (gnd) 3 Cvin (gnd Cvin (gnd 9 no pin common 11 no function Cvout 14 +vout +vout 16 Cvout common 22 +vin (vcc) +vin (vcc) 23 +vin (vcc) +vin (vcc) pin-out ev. octoer 26. 2015 general specifications remote on/off C on 3.5 ... 12 vdc or open circuit C off 0 ... +1.2 vdc or short circuit pin 1 and pin 2 C off idle current 10 ma max. switching frequency 330 khz typ. safety standards ul/cul 60950-1, iec/en 60950-1 safety approvals C csa certificate according ul 60950-1 www.tracopower.com/products/thd10n-csa.pdf environmental compliance C reach www.tracopower.com/overview/thd10n C rohs rohs directive 2011/65/eu physical specifications casing metal with non conductive baseplate pin copper alloy with gold plated nickel subplate weight 17.3 g ( 0.61 oz ) soldering temperature (1.5mm from case for 10 sec.) max. 260c 91 1 22 23 23 16 14 bottom view 15.22 2.54 20.3 (0.10) (0.60) (0.80) 10.2 (0.40) 4.1 (0.16) 2.54 15.24 5.08 4.5 31.8 (0.10) (0.60) (0.20) (0.18) (1.25) 1 2.54 5.08 4.5 (0.20) (0.18) 15.24 (0.60) (0.10) dimensions in mm, () inch pin diameter 0.5 0.05 (0.02 0.002) tolerances 0.5 (0.02) pin pich tolerances 0.25 (0.01) application note: www.tracopower.com/products/thd10n-application.pdf pending pending
|