technical data sheet adaptor tnc 50 ? plug - bnc 50 ? jack 56S151-K00N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to bnc side iec 61169-8, mil-prf-39012, cecc 22120 tnc side iec 60169-17, mil-prf-39012, din en 122200 documents n/a material and plating connector parts material plating center contact bnc and tnc side cube aurodur?, gold plated outer contact bnc and tnc side brass flash white bronze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket neoprenecr 50c6
technical data sheet adaptor tnc 50 ? plug - bnc 50 ? jack 56S151-K00N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 35 db @ dc to 1 ghz ? 26 db @ 1 ghz to 2 ghz ? 18 db @ 2 ghz to 4 ghz insertion loss ? 0.05 x [ghz] f db, dc to 4 ghz insulation resistance ? 5 g ? center contact resistance ? 1.5 m ? bnc and tnc side outer contact resistance ? 1 m ? bnc and tnc side test voltage (at sea level) 1500 v rms working voltage (at sea level) 500 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz mechanical data bnc side tnc side mating cycles ? 500 ? 500 center contact captivation: axial ? 15 n ? 15 n coupling test torque n/a ? 1.7 nm recommended torque n/a 0.46 nm to 0.69 nm environmental data temperature range -65 c to +165 c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition g moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a weight weight 22.6 g/pce draft date approved date rev. engineering change number name date inge mhlauer 10.08.04 sa. krautenbacher 20.03.14 f00 14-0352 t. krojer 20.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
