1 g 5 r l - u / - k g5rl-u/-k pcb power relay 16 a high switching current, general-purpose latching relay ? creepage distance 8 mm between coil and contacts. ? 10 kv impulse withstand voltage. ? ambient operating temperature 85c ? suitable for tv-8 ra ting. (spst-no (1a)) model number legend application examples ? housing equipments ? building automation ? ups, fa equipment ? electric power meter ordering information note. when ordering, add the rated coil voltage to the model number. example: G5RL-U1A-E dc5 however, the notation of the coil voltage on the produc t case as well as on the packing will be marked as @@ vdc. ratings coil single-winding latching type double-winding latching type rohs compliant 1. relay function u : single-winding latching k : double-winding latching 2. number of poles 1:1-pole 3. contact form none: spdt (1c) a : spst-no (1a) 4. classification e : high-capacity g5rl- @@@ - @ 123 4 classification terminal shape contact form enclosure rating single-winding latching double-winding latching minimum packing unit model rated coil voltage model rated coil voltage high-capacity pcb terminals spst-no (1a) flux protection G5RL-U1A-E 3 vdc 5 vdc 6 vdc 12 vdc 24 vdc g5rl-k1a-e 5 vdc 12 vdc 24 vdc 100 pcs/tray spdt (1c) g5rl-u1-e g5rl-k1-e rated voltage rated current (ma) coil resistance ( ) must set voltage must reset voltage max voltage power consumption (w) % of rated voltage 3 vdc 200 15 70% max. 70% max. 130% approx. 0.6 5 vdc 120 41.7 6 vdc 100 60 12 vdc 50 240 24 vdc 25 960 rated voltage rated current (ma) coil resistance ( ) must set voltage must reset voltage max voltage power consumption (w) set coil reset coil set coil reset coil % of rated voltage set coil reset coil 5 vdc 150 33.3 70% max. 70% max. 130% approx. 0.75 12 vdc 62.5 192 24 vdc 35 686 approx. 0.84 rated coil voltage
2 g5rl-u/-k pcb power relay g 5 r l - u / - k note. the rated current and resistance are measured at a coil temperature of 23c with a tolerance of 10%.
3 g5rl-u/-k pcb power relay g 5 r l - u / - k contacts characteristics note. values in the above table are initial values. *1. the contact resistance is measured with 1 a ap plied at 5 vdc using a fall-of-potential method. *2. these are measured at a coil temperature of 23c and rated coil voltage. pulse duty factor should be 10% max. *3. the insulation resistance is measured between coil and c ontacts and between contacts of same polarity at 500 vdc. *4. operated with input pulse width ?30 ms?. engineering data load resistive load contact form spst-no (1a) spdt (1c) contact type single contact material ag alloy (cd free) rated load 16 a at 250 vac 16 a at 24 vdc 16 a at 250 vac (n.o) 5 a at 250 vac (n.c) 16 a at 24 vdc (n.o) 5 a at 24 vdc (n.c) rated carry current 16 a 16 a (n.o), 5a (n.c) max. switching voltage 250 vac, 24 vdc max. switching current 16 a 16 a (n.o), 5 a (n.c) classification spst-no (1a), spdt (1c) item relay function single-winding latching, double-winding latching contact resistance *1 100 m max. set time 10 ms max. reset time 10 ms max. minimum pulse width *2 30 ms maximum pulse width *2 1 min insulation resistance *3 1,000 m min. dielectric strength between coil and contacts 6,000 vac, 50/60 hz for 1 min between contacts of the same polarity 1,000 vac, 50/60 hz for 1 min impulse withstand voltage between coil and contacts 10 kv (1.2 50 s) insulation distance between coil and contacts clearance: 6.4 mm, creepage: 8 mm vibration sesistanse destruction 10 to 55 to 10 hz, 0.75 mm single amplitude (1.5 mm double amplitude) malfunction 10 to 55 to 10 hz, 0.75 mm single amplitude (1.5 mm double amplitude) at set status 10 to 55 to 10 hz, 0.75 mm single amplitude (1.5 mm double amplitude) at reset status (except spst-no) shock resistance destruction 1,000 m/s 2 malfunction 150 m/s 2 at set status 50 m/s 2 at reset status (except spst-no) durability mechanical *4 5,000,000 operations min. electrical *4 50,000 operations min. ambient operating temperature -40 to 85c (with no icing or condensation) ambient operating humidity 5% to 85% weight approx. 10 g maximum switching power ambient temperature vs. maximum coil voltage malfunction shock note. maximum voltage of set pulse and reset pulse at duty factor 10%. sample: g5rl-k1a-e 12vdc no. of relays: 5 pcs test conditions:shock is applied in x, y, and z directions three times each with set and reset status to check the number of contact malfunctions. standard value:50 m/s 2 with set status 100 m/s 2 with reset status switching current (a) switching v oltage (v) 50 10 5 1 0.5 0.1 1 10 24 100 250 1000 ac resisti v e load (n .c.) dc resistiv e load (n .c.) 16 140 120 100 80 60 40 20 0 130 ?40 ?20 0 20 40 60 80 85 100 maxim um v oltage (%) amb ient temperature (?c) z? z unit: m/s 2 shock direction y y y? y? x x? x? x no 1,000 1,000 800 600 400 200 200 400 600 800 z z?
4 g5rl-u/-k pcb power relay g 5 r l - u / - k dimensions (unit: mm) 20 5 29.0max. (28.8)* 0.43 0.33 7.5 12.7max. (12.5)* 1 @ 0.5 3.5 15.7max. (15.5)* ?u1a?e (2.3) 7.50.1 six, 1.30.1 dia. 200.1 50.1 ? r + + s ? 13 4 56 8 G5RL-U1A-E * average value pcb mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) note. check carefully the coil polarity of the relay. note. orientation marks are indicated as follows: 20 5 5 29.0max. (28.8)* 0.43 0.43 0.33 7.5 1 @ 0.5 3.5 15.7max. (15.5)* 12.7max. (12.5)* 50.1 50.1 (2.3) 7.50.1 200.1 eight, 1.30.1 dia. 34 56 2 7 ? r + + s ? 1 8 g5rl-u1-e ?u1?e * average value pcb mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) note. orientation marks are indicated as follows: note. check carefully the coil polarity of the relay. g5rl-k1a-e ?k1a?e 20 5 29.0max. (28.8)* 0.43 0.33 3.75 3.75 7.5 0.8 12.7max. (12.5)* 1 @ 0.5 3.5 15.7max. (15.5)* (2.3) 3.750.1 (3.75) 7.50.1 se v en, 1.30.1 dia. 200.1 50.1 34 56 ? r + s ? 1 8 9 * average value pcb mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) note. orientation marks are indicated as follows: note. check carefully the coil polarity of the relay. g5rl-k1-e ?k1?e 20 5 5 29.0max. (28.8)* 0.43 0.43 0.33 3.75 3.75 7.5 0.8 1 @ 0.5 3.5 15.7max. (15.5)* 12.7max. (12.5)* 50.1 50.1 ? r + s ? 13 4 56 2 7 8 9 (2.3) 3.750.1 (3.75) 7.50.1 200.1 n ine, 1.30.1 dia. * average value pcb mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) note. orientation marks are indicated as follows: note. check carefully the coil polarity of the relay.
5 g5rl-u/-k pcb power relay g 5 r l - u / - k approved standards ul recognized (file no. e41643) and csa certified (file no. lr31928) vde certified (en61810-1) (license no. 40007172) precautions please refer to ?pcb relays common precautions? for correct use. basic operation of latching relays ? in these relays, the input pulse of the set coil causes the operating condition to be maintained magnetically or mechanically, whereas the input pulse to the reset coil side puts the relay into the reset condition. coil temperature rise of long time continuous current to the coil ? when the coil is applied continuous current for a long time, the coil would be heat too much. please decide the coil input pulse width by ?heat and cold of coil temperature? wiring of high-capacity models (-e) ? high-capacity models (-e) have a structure that connects two terminals from one contact. when designing the circuit, use both terminals. if you use only one terminal, the relay may be unable to satisfy specified performance. precautions for correct use ? this product is not suitable for vehicles such as automobiles (including two-wheeled vehicles). ? if the product is used in the following applications, consult your omron sales representative to check the necessary items according to the specification sheets.also make sure the product is used within the specified ratings and performance ranges with an ample margin and implement safety measures, such as designing a safety circuit, to minimize danger should the product fail. a. outdoor use, uses involving potential chemical contamination or electrical interference. b. nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, safety equipment, and equipment that could present a risk to human life or body. c. equipment requiring a high level of reliability, such as gas, water, or electrical supply systems. model contact form coil ratings contact ratings number of test operations G5RL-U1A-E g5rl-k1a-e spst-no (1a) 5 to 24 vdc ( ?-u? models: 3 to 24 vdc) 16 a 277 vac (resistive) - no 85c 50,000 tv-5 - no 40c 25,000 tv-8 - no 40c 25,000 8 a 250 vac (ballast) - no 40c 6,000 2,000 w 250 vac (tungsten) 70c 6,000 g5rl-u1-e g5rl-k1-e spdt (1c) 16 a 277 vac (resistive) - no 85c 50,000 8 a 250 vac (ballast) - no 40c 6,000 2,000 w 250 vac (tungsten) - no 40c 6,000 5 a 250 vac (general) - nc 40c 50,000 model contact form coil ratings contact ratings number of test operations G5RL-U1A-E g5rl-k1a-e spst-no (1a) 5, 12, 24 vdc ( ?-u? models: 3, 5, 6, 12, 24 vdc) 16 a 250 vac (cos =1) - no 85c 30,000 240 vac 100 a (0-p) steady 10 a (rms) - no 85c 50,000 g5rl-u1-e g5rl-k1-e spdt (1c) 16 a 250 vac (cos =1) - no 85c 30,000 5 a 250 vac (cos =1) - nc 85c 30,000 correct use set input reset input no contact nc contact time (minute) coil temperature (?c) 100 80 60 40 20 0 0 5 10 15 20 25 30 35 40 45 50 55 60 heat and cold of coil temperature application examples provided in this document are for reference only. in actual applications, confirm equipment functions and safety before using the product. consult your omron representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. omron corporation electronic and mechanical components company contact: www.omron.com/ecb cat. no. k265-e1-06 0316(0913)(o) note: do not use this document to operate the unit.
|
