power inductors C agp4233 document 917-1 document 917-1 revised 12/12/14 core material ferrite core and winding loss see www.coilcraft.com/coreloss environmental rohs compliant, halogen free terminations rohs compliant tin-silver over copper shield tabs rohs compliant bright tin over nickel over stainless steel weight 135 g ambient temperature C40c to +125c with i rms current maximum part temperature +165c (ambient + temp rise). derating . storage temperature component: C40c to +165c. tray packaging: C40c to +80c moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 9 parts per tray pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . inductance 1 dcr (mohms) 2 srf typ i sat (a) 3 i rms (a) 4 part number 20% (h) nom max (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise agp4233-682me 6.8 2.80 2.95 21.7 92.0 97.8 101.8 24 34 agp4233-103me 10 2.80 2.95 18.8 56.0 60.0 63.0 24 34 AGP4233-153ME 15 2.80 2.95 15.2 45.0 47.0 49.0 24 34 agp4233-223me 22 2.80 2.95 12.0 32.8 35.4 36.6 24 34 agp4233-333me 33 2.80 2.95 10.0 22.5 24.7 25.8 24 34 agp4233-473me 47 2.80 2.95 8.5 16.0 17.6 18.6 24 34 agp4233-683me 68 2.80 2.95 6.4 10.6 12.2 13.0 24 34 agp4233-104me 100 2.80 2.95 5.2 6.88 7.80 8.36 24 34 agp4233-154me 150 2.80 2.95 4.2 4.18 4.96 5.40 24 34 agp4233-224me 220 10.5 11.5 5.0 6.40 7.20 7.60 12.4 17.5 agp4233-334me 330 10.5 11.5 4.1 4.20 4.70 5.00 12.4 17.5 agp4233-474me 470 10.5 11.5 3.6 2.60 3.20 3.40 12.4 17.5 1. inductance tested at 100 khz, 0.1 vrms on agilent/hp 4192a. 2. dcr measured on a keithley 580 micro-ohmmeter or equivalent. 3. dc current at 25c that causes the specifed inductance drop from its value without current. click for temperature derating information. 4. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maxi - mum ratings. click for temperature derating information . temperature rise of the core is usually less than that of the winding. when i rms is greater than i sat, i sat is the more critical specifcation and i rms is shown in gray type . 5. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. ? aec-q200 grade 1 qualifed ? designed for high current power supply applications ? flat wire windings provide extremely low dc and ac resistance. ? shield has solderable tabs for additional mounting stability.
document 917-2 document 917-2 revised 12/12/14 typical l vs current typical l vs frequency power inductors C agp4233 series
document 917-3 document 917-3 revised 12/12/14 dimensions are in inches mm a gp4233-xxxme xxxx x 1.41 0.04 35,8 1,0 inter nal code 1.66 0.04 42,2 1,0 0.150 3,80 0.032 0,82 0.246 6,25 0.209 5,3 max 1.10 28,0 max 0.689 17,5 0.689 17,5 0.413 10,5 0.413 10,5 0.156 3,95 0.266 6,75 0.061 1,54 0.039 1,00 recommended pc b oar d la y out 0.364 9,25 0.364 9,25 c l c l 220 ? 470 h 0.020 0,50 co ve rt abs pro vided fo r mounting stability only . a gp4233-xxxme xxxx x 1.41 0.04 35,8 1,0 intern al code 1.66 0.04 42,2 1,0 0.150 3,80 0.059 1,50 0.020 0,50 0.246 6,25 0.209 5,3 max co ve rt abs pro vided fo r mounting stability only . 1.10 28,0 max 0.689 17,5 0.689 17,5 0.443 11,25 0.443 11,25 0.156 3,95 0.266 6,75 0.079 2,00 0.039 1,00 recommended pc b oar d la y out 0.364 9,25 0.364 9,25 c l c l 6.8 ? 150 h dimensions are in inches mm power inductors C agp4233 series
|
