View B39881B8576P810_8701163.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer cellular / wcdma band 5 series/type: ordering code: b8576 B39881B8576P810 date: version: february 9, 2015 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application multimode saw duplexer for mobile telephonecellular / wcdma band 5 systems low insertion attenuation low amplitude ripple high tx band isolation single ended to balanced transformation inantenna - rx path impedance transformation from 50 w to 100 w in antenna - rx path features package size 1.8 x 1.4 mm 2 max. package height 0.475 mm rohs compatible approx. weight 0.0042g package for s urface m ount t echnology ( smt ) ni, au-plated terminals e lectrostatic s ensitive d evice ( esd ) m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.475 max. 0.7 pin configuration 3 tx input 1,8 rx output (balanced) 6 antenna 2, 4, 5, 7 to be grounded 4,5 1 3 8 2,7 6
3 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to + 90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. center frequency f c 836.5 mhz maximum insertion attenuation a max 824.0 ... 849.0 mhz 1.5 2.3 db @f carrier 826.4... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 1.3 2.1 db amplitude ripple da 824.0 ... 849.0 mhz 0.6 1.4 db error vector magnitude @f carrier 826.4... 846.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.1 4.0 % input vswr (tx port) 824.0 ... 849.0 mhz 1.5 2.0 output vswr (ant port) 824.0 ... 849.0 mhz 1.4 2.0
4 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to + 90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. absolute attenuation a 10.0 ... 420.0 mhz 40 45 db 420.0 ... 494.0 mhz 38 42 db 494.0 ... 701.0 mhz 35 39 db 701.0 ... 728.0 mhz 35 40 db 728.0 ... 764.0 mhz 35 41 db 764.0 ... 804.0 mhz 30 37 db 860.0 ... 869.0 mhz 3 10 db 869.0 ... 894.0 mhz 45 52 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 48 53 db 1236.0 ... 1341.0 mhz 40 47 db 1574.0 ... 1577.0 mhz 35 39 db 1638.0 ... 1708.0 mhz 33 36 db 1844.9 ... 1879.9 mhz 30 34 db 1884.5 ... 1919.6 mhz 30 34 db 1930.0 ... 1990.0 mhz 30 33 db 2110.0 ... 2170.0 mhz 28 31 db 2400.0 ... 2557.0 mhz 25 28 db 3286.0 ... 3406.0 mhz 20 25 db 4110.0 ... 4255.0 mhz 20 24 db 4934.0 ... 5350.0 mhz 10 14 db 5725.0 ... 5953.0 mhz 5 10 db
5 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to + 90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. center frequency f c 881.5 mhz maximum insertion attenuation a max 869.0 ... 894.0 mhz 1.7 2.4 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 1.5 2.2 db amplitude ripple (p-p) da 869.0 ... 894.0 mhz 0.5 1.2 db error vector magnitude @f carrier 871.4 ... 891.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.7 3.5 % input vswr (ant port) 869.0 ... 894.0 mhz 1.7 2.0 output vswr (rx port) 869.0 ... 894.0 mhz 1.6 2.0 common mode rejection ratio 869.0 ... 894.0 mhz cmrr 23 3) 3) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 27 db
6 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to + 90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 447.0 mhz 45 75 db 447.0 ... 824.0 mhz 45 61 db 824.0 ... 849.0 mhz 50 60 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 55 61 db 849.0 ... 854.0 mhz 10 56 db 854.0 ... 871.5 mhz 0.9 1.3 db 909.0 ... 914.0 mhz 10 20 db 914.0 ... 940.0 mhz 20 27 db 940.0 ... 1000.0 mhz 40 49 db 1000.0 ... 1693.0 mhz 40 53 db 1693.0 ... 1850.0 mhz 45 54 db 1850.0 ... 1920.0 mhz 40 54 db 1920.0 ... 5000.0 mhz 40 46 db 5000.0 ... 6000.0 mhz 30 41 db imd product level limits 2) at f tx = 836.5 mhz f rx = 881.5 mhz 2) power levels: 21.5 dbm tx signal, -15dbm blocker at antenna port. blocker 1 45.0 mhz -125 -109 dbm blocker 2 791.5 mhz -106 -96 dbm blocker 3 1718.0 mhz -106 -96 dbm blocker 4 2554.5 mhz -115 -105 dbm
7 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to + 90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characterisitcs tx - rx min. typ. @ 25 ?c max. differential mode isolation a 824.0 ... 849.0 mhz 54 63 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 57 63 db 869.0 ... 894.0 mhz 50 55 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 52 56 db 1574.0 ... 1577.0 mhz 40 64 db 1638.0 ... 1708.0 mhz 40 62 db 2462.0 ... 2557.0 mhz 40 56 db common mode isolation 824.0 ... 849.0 mhz 42 47 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 42 48 db
8 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 5-passband, f carrier ranges from 826.4 mhz (lowest tx channel) to 846.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state acc. to iec 60068-2-67 cy v esd voltage v esd 100 2) 2) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model input power p in source and load impedance 50 w 824.0 ... 849.0 mhzelsewhere 2910 dbmdbm continuous wave t = 50?c, 5000 h s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd h rrc f ( ) 2 f 1 = d }
9 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (power transfer function) frequency response ant-rx (power transfer function)
10 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant (power transfer function) frequency response tx-ant (wideband)
11 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response ant-rx (power transfer function) frequency response ant-rx (wideband)
12 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet differential mode isolation tx-rx (power transfer function) differential mode isolation tx-rx (wideband)
13 february 9, 2015 b8576 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswr s 11 tx- port s 22 ant-port s 33 rx-port
14 february 9, 2015 b8576 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8576 ordering code B39881B8576P810 marking and package c61157-a8-a68 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8576_nb_un.s4p, b8576_wb_un.s4psee file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2015. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
15 february 9, 2015 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39881B8576P810

	To Download B39881B8576P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .