a c print type - ------ - see engineering for rev a-f g 04/03/2008 sk see co 200152 for changes tolerances unless noted .xx=.010 .xxx=.005 frac.=1/64 ang.=1 h 01/12/2010 dz see co 200485 for changes i 04/06/10 sk see co 200516 for changes "e" 7/32 5.6 engr. date rev. part # chkd: app: dwn: dt: sheet size: sheet: file #: 1 of 1 a 04/01/2008 s.j. s.k. n-series final dwg in in [mm] richco, inc. r.g. eng@richco-inc.com re: description richco, inc. (773) 539-4060 solidworks title: cable clamp, n series created using see table 11/64 [4.4] dia. (1/8 [3.2] for n1 only) some parts may have slight chamfer on hole 3/8" 9.5 notes: 1. material: nylon 6/6 ul 94 v-2 (rms-01). *nylon 6/6 ul 94 v-0 (rms-19) available by special order only. *nylon 6/6 ul 94 v-2, uv stabilized (rms-46), color black, available by special order only. 2. recommended screw size is #8 [m4], (#4 [m2.5] for n-1). 3. alternate units are for reference only shown as molded part no. "d" holding diameter "e" ref. nylon 6/6 ul 94 v-2 natural nylon 6/6 ul 94 v-2 black *nylon 6/6 ul 94 v-0 black *nylon 6/6 ul 94 v-0 natural *uv stabilized nylon 6/6 ul 94 v-2 black n-1 n-1-bk n-1-19-bk n-1-19 n-1-uvb 1/16 [1.6] .27 [6.7] n-2 N-2-BK n-2-19-bk n-2-19 n-2-uvb 1/8 [3.2] 21/64 [8.3] n-3 n-3-bk n-3-19-bk n-3-19 n-3-uvb 3/16 [4.8] 25/64 [9.9] n-4 n-4-bk n-4-19-bk n-4-19 n-4-uvb 1/4 [6.4] 27/64 [10.7] n-5 n-5-bk n-5-19-bk n-5-19 n-5-uvb 5/16 [7.9] 29/64 [11.5] n-6 n-6-bk n-6-19-bk n-6-19 n-6-uvb 3/8 [9.5] 31/64 [12.3] n-7 n-7-bk n-7-19-bk n-7-19 n-7-uvb 7/16 [11.1] 17/32 [13.5] n-8 n-8-bk n-8-19-bk n-8-19 n-8-uvb 1/2 [12.7] 9/16 [14.3] "d" 1/16" 1.5
|