| filename: tfs 192a.doc  version 1.5  06.03.2008    vi  telefilter   filter specification  tfs 192a  1/5      tele filter gmbh    potsdamer stra?e 18    d 14 513 teltow / germany    tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30    e-mail:  tft@vectron.com   vi telefilter reserves the right to make changes to  the product(s) and/or information contained herein  without notice.  no liability is  assumed as a result of their use or application.  n o rights under any patent accompany the sale of any  such product(s) or information.  measurement condition          ambient temperature:  23  c  input power level:  0  dbm  terminating impedance: *    input:  428    || -7 pf       output:  224    || -8,7 pf        characteristics    remark:  the reference level for the relative attenuation a rel  of the tfs 192a is the minimum of the pass band at tenuation. this value is defined as the insertion l oss  a e .  the  nominal  frequency  f n   is  fixed  at  192,0  mhz  without  any  tolerance.  the  v alues  of  relative  attenuation  a rel   are  guaranteed  for  the  whole  operating  temperature range. the frequency shift of the filte r in the operating temperature range is included in  the production tolerance scheme.        d a t a    typ. value    tolerance / limit  insertion loss  a e   14,8  db    max.  17,0  db  (reference level)                nominal frequency  f n    -        192,0  mhz  passband    pb  -      f n                 30           mhz  pass band ripple  p-p                          0,9  db    max.  1,5  db  bandwidth  bw              1  db          64  mhz    min.  60  mhz  40  db          87  mhz    max.  93  mhz  relative attenuation  a rel               f n         ?   f n     30  mhz     0,9  db    max.  1,5  db  f n   -  182  mhz   ?   f n   -  55  mhz     46  db    min.  40  db  f n   -  55  mhz   ?   f n   -  46,5  mhz     40  db    min.  37  db  f n   +  46,5  mhz   ?   f n   +  55  mhz     40  db    min.  37  db  f n   +  55  mhz   ?   f n   +  258  mhz     46  db    min.  40  db  f n   +  258  mhz   ?   f n   +  578  mhz     45  db    min.  20  db  group delay ripple within pb  p-p                           30  ns    max.  50  ns  return loss  ***                            4  db    min.  3  db  input power level            max.  10  dbm  operating temperature range    otr        - 40 c ... + 85 c  storage temperature range            - 40 c ... + 85 c  temperature coefficient of frequency    tc f    **  -78  ppm/k      -                      *) the terminating impedances depend on parasitics  and q-values of matching elements and the board use d, and are to be understood as  reference values  only. should there be additional questions do not h esitate to ask for an application note or contact o ur design team.   **)   ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f cat (mhz).       generated:        checked / approved: filename: tfs 192a.doc  version 1.5  06.03.2008    vi  telefilter   filter specification  tfs 192a  2/5      tele filter gmbh    potsdamer stra?e 18    d 14 513 teltow / germany    tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30    e-mail:  tft@telefilter.com   vi telefilter reserves the right to make changes to  the product(s) and/or information contained herein  without notice.  no liability is  assumed as a result of their use or application.  n o rights under any patent accompany the sale of any  such product(s) or information.  filter characteristic                                       construction and pin connection    (all dimensions in mm)    1,8 +/-0,2 1 7 ,0 +/-0,2 5 ,0 +/-0,2 2,54 2,54 0,6 1 1 3 7 9 4 6 12 10 date code        50 ohm test circuit           s 192a         v4 1   date code:    year + week  v        2007  w        2008  x        2009  ...    s 192a         w10   1        ground  2        ground  3        ground  4        output  5        ground  6        output rf return   7        ground  8        ground  9        ground  10        input  11        ground  12        input rf return    date code:    year + week  w        2008  x        2009  a        2010  ...    72 102 132 162 192 222 252 282 312 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 162 168 174 180 186 192 198 204 210 216 222 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db 162 168 174 180 186 192 198 204 210 216 222 0.364 0.4 0.436 0.472 0.508 0.544 0.58 0.616 0.652 0.688 0.724 frequency in mhz delay in s l1 l2 saw c2 l2  10   4   1, 2, 3, 5, 7, 8, 9, 11  6   12
 filename: tfs 192a.doc  version 1.5  06.03.2008    vi  telefilter   filter specification  tfs 192a  3/5      tele filter gmbh    potsdamer stra?e 18    d 14 513 teltow / germany    tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30    e-mail:  tft@telefilter.com   vi telefilter reserves the right to make changes to  the product(s) and/or information contained herein  without notice.  no liability is  assumed as a result of their use or application.  n o rights under any patent accompany the sale of any  such product(s) or information.  stability characteristics, reliability    after the following tests the filter shall meet the  whole specification:    1. shock:  500g, 1 ms, half sine wave, 3 shocks each  plane;    din iec 68 t2 - 27    2. vibration:  10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plan, 3 pl ans;    din iec 68 t2 - 6    3. change of      temperature:  -55 c to 125c / 30 min. each / 1 0 cycles       din iec 68  part 2 ? 14 test n    4. resistance to      solder heat (reflow):  reflow possible: three ti mes max.;    for temperature conditions refer to the attached " air reflow temperature conditions" on page 4;    this filter is rohs compliant (2002/95/eg, 2005/618 /eg)           packing    tape & reel:  iec 286 ? 3, with exception of value f or n and minimum bending radius;    tape type ii, embossed carrier tape with top cover  tape on the upper side;      max. pieces of filters per reel:  3000    reel of empty components at start:  min. 300 mm    reel of empty components at start including leader :  min. 500 mm    trailer:  min. 300 mm                  g do w ct f e g d1 p2 p1 po bo ao pull off direction  pin marker typ date code ko t     a c n w 1 w 2     the minimum bending radius is 45 mm.  tape (all dimensions in mm)  w  :  16,00   0,3  po  :  4,00   0,1  do  :  1,50  +0,1/-0  e  :  1,75   0,1  f  :  7,50   0,1  g(min)  :  0,60    p2  :  2,00   0,1  p1  :  8,00   0,1  d1(min)  :  1,50    ao   :  5,50   0,1  bo  :  7,50   0,1  ct  :  13,5   0,1    reel (all dimensions in mm)  a   : 330    w1  :  16,4  +2/-0  w2(max)  :  22,4    n(min)  :  50    c  :  13,0  +0,5/-0,2
 filename: tfs 192a.doc  version 1.5  06.03.2008    vi  telefilter   filter specification  tfs 192a  4/5      tele filter gmbh    potsdamer stra?e 18    d 14 513 teltow / germany    tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30    e-mail:  tft@telefilter.com   vi telefilter reserves the right to make changes to  the product(s) and/or information contained herein  without notice.  no liability is  assumed as a result of their use or application.  n o rights under any patent accompany the sale of any  such product(s) or information.  air reflow temperature conditions     conditions   exposure   average ramp-up rate (30c to 217c)  less than 3c/ second  > 100c  between 300 and 600 seconds  > 150c  between 240 and 500 seconds  > 217c  between   30 and 150 seconds  peak temperature  max. 260c  time within 5c of actual peak temperature  between  10 and 30 seconds  cool-down rate (peak to 50c)  less than 6c/second  time from 30c to peak temperature  no greater than  300 seconds                                                 temperature / c    time / s    max.  260c  217c     10 ... 30 s  30 ... 150 s  max. 300 s  chip-mount air reflow profile
 filename: tfs 192a.doc  version 1.5  06.03.2008    vi  telefilter   filter specification  tfs 192a  5/5      tele filter gmbh    potsdamer stra?e 18    d 14 513 teltow / germany    tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30    e-mail:  tft@telefilter.com   vi telefilter reserves the right to make changes to  the product(s) and/or information contained herein  without notice.  no liability is  assumed as a result of their use or application.  n o rights under any patent accompany the sale of any  such product(s) or information.  history      version  reason of changes    name  date                1.0  - generation of development specification  strehl  21.06.2007                  1.1  - change relative attenuation and pin connectio n / test circuit  strehl  02.07.2007     - change characteristics, f c  deleted                                 1.2  - correct construction  strehl  05.07.2007                         1.3  - change construction  strehl  03.08.2007       1.4  - correct construction  strehl  11.10.2007                     1.5  - created filter specification  chilla  06.03.2008    - added terminating impedances                         - added typical values    - added temperature coefficient of frequency    - added filter characteristic    - added test circuit    - changed passband ripple and relative attenuation
 
 |