saw components saw rf filter radiolink series/type: ordering code: b5169 B39112B5169B510 date: version: october 15, 2012 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 october 15, 2012 b5169 1080.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet application n rf filter for radiolink system n usable band width 7 mhz n no matching required for operation at 50 w features n package size 3.0 x3.0 x 1.1 mm 3 n package code qcc8f n rohs compatible n approximate weight 0.037 g n ceramic package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n filter surface passivated n moisture sensitivity level 1 side view 1.1 bottom view 0.6 3 7 5 3 . 0 top view 3.0 1 1.5 1.8 1.5 pin configuration n 2 input n 6 output n 4,8 case ground n 1, 3, 5, 7 to be grounded
3 october 15, 2012 b5169 1080.00 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +70 ?c terminating source impedance: z s =50 w terminating load impedance: z l =50 w min. typ. @ 25 ?c max. nominal frequency f n 1080 mhz maximum insertion attenuation a max 1076.5 ... 1083.5 mhz 2.5 3.5 db amplitude ripple (p-p) da 1076.5 ... 1083.5 mhz 1.0 1.6 db return loss (input / output) 1076.5 ... 1083.5 mhz 9.0 13 db group delay ripple (p-p) dt 1076.5 ... 1083.5 mhz 25 50 ns 1077.5 ... 1082.5 mhz 15 35 ns 1078.25 ... 1081.75 mhz 10 25 ns absolute attenuation a 10 .0 ... 1050.0 mhz 40 45 db 1050.0 ... 1062.5 mhz 35 40 db 1062.5 ... 1067.5 mhz 5 24 db 1097.5 ... 1100.0 mhz 30 38 db 1100.0 ... 1110.0 mhz 35 50 db 1110.0 ... 1500.0 mhz 40 50 db 1500.0 ... 2500.0 mhz 30 34 db
4 october 15, 2012 b5169 1080.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet characteristics temperature range for specification: t = C30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l =50 w min. typ. @ 25 ?c max. nominal frequency f n 1080 mhz maximum insertion attenuation a max 1076.5 ... 1083.5 mhz 2.5 3.5 db amplitude ripple (p-p) da 1076.5 ... 1083.5 mhz 1.0 1.8 db return loss (input / output) 1076.5 ... 1083.5 mhz 9.0 13 db group delay ripple (p-p) dt 1076.5 ... 1083.5 mhz 25 50 ns 1077.5 ... 1082.5 mhz 15 35 ns 1078.25 ... 1081.75 mhz 10 25 ns absolute attenuation a 10 .0 ... 1050.0 mhz 40 45 db 1050.0 ... 1062.5 mhz 35 40 db 1062.5 ... 1067.5 mhz 5 24 db 1097.5 ... 1100.0 mhz 26 38 db 1100.0 ... 1110.0 mhz 35 50 db 1110.0 ... 1500.0 mhz 40 50 db 1500.0 ... 2500.0 mhz 30 34 db maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C55/+85 ?c dc voltage v dc 0 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulses. v machine model, 1 pulse input power at 1076.5 - 1083.5 p in 10 dbm cw
5 october 15, 2012 b5169 1080.00 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. transfert function (s21 narrow band) transfert function (s21 wide band)
6 october 15, 2012 b5169 1080.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet references type b5169 ordering code B39112B5169B510 marking and package c61157-a7-a165 packaging f61074-v8228-z000 date codes l_1126 s-parameters b5169_nb.s2p,b5169_wb.s2p see file header for port/in assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2012. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
7 october 15, 2012 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
