emi: meets ce / meets fcc comply with indoor/outdoor waterproof (ip 67) warranty: 3 years (refer to linkcom warranty policy) 0-10v dimming 0.8 a / 110 vac; 0.4 a / 230 vac withstand voltage (6) 100% production tested. please contact sales@linkcom.com.tw , sales@linkcomusa.com for more information relative humidity safety 10% to +90%, non-cond. over voltage protection i/p-o/p, i/p-fg,o/p-fg : >10m / 500 vdc / 25 / 70% rh < 0.75 ma at 277 vac meets fcc part15 / meets en 55015 emi operating temp. over temp. protection ac current 158 * 58 * 39.4 mm 6.22 * 2.28 * 1.55 inch (4) specified for free-air convection cooling. (5) minimum load is not required for proper operation . (2) all specifications typical at 25 , unless otherwise noted, at normal line and load. (3) ripple and noise measured directly at pins/terminals at nom. load, pk-pk at 20mhz bandwidth. reference: www.linkcom.com.tw dimension (l*w*h) i/p-o/p 4242 vdc, i/p-fg 2500 vdc,i/p-case : 2500 vdc -40 ~ +80 ul 8750 (1) all parameters specified at 230 vac input unless otherwise noted. storage temp. 0-10v dimmable constant current mode 33-42v 42-48v 86% dc output power(w) 62.4 short circuit protection thd 60-dbfe series leakage current dbfe0060u252 active power factor input voltage range input frequency inrush current (typ) 90-305 vac, 127-431 vdc, normal: 100-277 vac automatically after the fault condition is removed dbfe0060u142 86% 2.7v 5% < 20% at full load 100-277 vac > 0.95 @ 110 vac; > 0.9 @ 230 vac 2v product specification dbfe0060u132 dbfe0060u152 isolation resistance o/p noise (pk-pk,v) 63.0 5% 58.8 5% 60.0 30-40v -20 ~ +60 @ full load 110-277 vac dbfe0060u212 5% 3.6v 2.1 24-30v 60.0 1.5 3000 ms at full load 115 vac / 230 vac electrical specification turn on delay time 5% dbfe0050u432 4.3 cold start 50 a @ 230 vac output current tolerance 5% 82% 61.2 30-36v 2.5 86% range: 47-63hz, normal: 50-60hz model 3.6v 51.6 9-12v dbfe0060u172 4.6v 5% output current(a) 86% 86% efficiency 1.4 86% 19-24v 1.7 dc output voltage(v) 1.3 features: rohs compliant ac input 90~305 vac nominal built-in active power factor correction high operating ambient temp.: -20~+60 thd: <20% @ 277vac full load surge protection: l-n 1 kv, l/n-fg 2 kv protection: scp / ovp / otp safety: ul 4.2v 4v www.linkcom.com.tw for more information, please contact with: sales@linkcom.com.tw linkcom manufacturing co., ltd. 5f., no. 127, ln. 235, baoqiao rd., xindian dist., new taipei city 231-45, taiwan ? t: +886-2-8919-1380 ? f: +886-2-8919-1370 ? www.linkcom.com.tw
0-10v dimmable constant current mode 60-dbfe series www.linkcom.com.tw for more information, please contact with: sales@linkcom.com.tw dimensions reference: www.linkcom.com.tw tc max. dbfe0060u252 as tc max. reference linkcom manufacturing co., ltd. 5f., no. 127, ln. 235, baoqiao rd., xindian dist., new taipei city 231-45, taiwan ? t: +886-2-8919-1380 ? f: +886-2-8919-1370 ? www.linkcom.com.tw
0-10v dimmable constant current mode 60-dbfe series www.linkcom.com.tw for more information, please contact with: sales@linkcom.com.tw dimming operation (typical) maximum 10v 1v parameters minimum typical absolute maximum voltageon on the 0-10(+) purple wire source current on the 0-10v(+) purple wire notes: 0ma 1. 0-10v dimmable must be connect to extra two wires +purple/-gray on the output side. 1ma 3. if output side wires +purple/-gray are open, the output current io will be 100%. 2. recommended dimmers are leviton ip710,lutron ntstv-dv or equivalent. 0 - 10v analog dimming typical circuit 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 0 1 2 3 4 5 6 7 8 9 10 output current (%) dimming input(vdc) dimming performance linkcom manufacturing co., ltd. 5f., no. 127, ln. 235, baoqiao rd., xindian dist., new taipei city 231-45, taiwan ? t: +886-2-8919-1380 ? f: +886-2-8919-1370 ? www.linkcom.com.tw pdbfe0 06 0 xxxx - 00 g v (levit on) ip710 dimmer (lutron) ntstv - dv dimmer gray ( - ) red (+) black ( - ) purple (+)
0-10v dimmable constant current mode 60-dbfe series www.linkcom.com.tw for more information, please contact with: sales@linkcom.com.tw output current vs. load (dbfe-060u132-00) efficiency vs. load (dbfe-060u132-00) power factor vs. load (dbfe-060u132-00) 0.80 0.85 0.90 0.95 1.00 86% 88% 90% 92% 94% 96% 98% 100% 102% power factor load (%) pf vs. load vin=100 vin=120 vin=200 vin=230 vin=277 80.0% 82.0% 84.0% 86.0% 88.0% 90.0% 86% 88% 90% 92% 94% 96% 98% 100% 102% efficiency (%) load (%) efficiency vs. load vin=100 vin=120 vin=200 vin=230 vin=277 1.280 1.290 1.300 1.310 1.320 84% 86% 88% 90% 92% 94% 96% 98% 100% 102% output current (a) load (%) output current vs. load vin=100 vin=120 vin=200 vin=230 vin=277 linkcom manufacturing co., ltd. 5f., no. 127, ln. 235, baoqiao rd., xindian dist., new taipei city 231-45, taiwan ? t: +886-2-8919-1380 ? f: +886-2-8919-1370 ? www.linkcom.com.tw
0-10v dimmable constant current mode 60-dbfe series www.linkcom.com.tw for more information, please contact with: sales@linkcom.com.tw thd vs. load (dbfe-060u132-00) 0% 5% 10% 15% 20% 86% 88% 90% 92% 94% 96% 98% 100% 102% thd (%) load (%) thd vs. load vin=100 vin=120 vin=200 vin=230 vin=277 linkcom manufacturing co., ltd. 5f., no. 127, ln. 235, baoqiao rd., xindian dist., new taipei city 231-45, taiwan ? t: +886-2-8919-1380 ? f: +886-2-8919-1370 ? www.linkcom.com.tw
|
