et-8ins ethertrak ? ethernet i/o module sixnet automation series ethernet i/o module C instrumentation input sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm instrumentation input select the et-8ins when you need to read thermocouples, or you need isolated 16 bit inputs for high accuracy, or to connect to floating 4-20 ma inputs. et-8ins product highlights ? advanced 16 bit a/d for extreme accuracy ? differential inputs minimize noise and ground loops ? software selectable ranges - mix inputs on module ? linearizes and compensates thermocouple readings ? upscale/downscale thermocouple burnout detection performance specifications ? 8 channels ? lowest voltage range +/- 0.062 volts ? maximum voltage range +/- 10 volts ? auto-polarity current range 4-20 ma, 0-20 ma ? thermocouple types j,k,e,r,t,b,c,n,s 1 ? a/d resolution 16 bits (0.003%) ? full scale accuracy (@20c) +/- 0.02% ? input span and offset adjustability +/- 25% ? span and offset temp. coef ? cient +/- 30 ppm per c typical ? voltage range input impedance 200k ohms ? current range input impedance 100 ohms ? cmrr (@ 50/60 hz) 140 db ? dmrr (@ 50/60 hz) 66 db ? common mode input voltage: between two input terminals +/- 25vdc between inputs and ground 1200 volts ? no damage input voltage +/- 50 vdc ? fastest scan rate (all 8 channels) 100 ms 2 ? required supply voltage 10-30 vdc (1.6 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% notes: 1 thermocouple inputs are cold-junction compensated and reported as f,c, 0.1f or 0.1c. 2 this scan rate applies to modules built after 30-july-04. earlier models may differ. contact us for details. rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information ET-8INS-U instrumentation module with base et-8ins-m replacement module only product datasheet datasheet et-8ins 2-mar-09 all speci ? cations are subject to change. consult factory for latest info. as the global experts in communication, monitoring and control for industrial automation and networking, red lion has been delivering innovative solutions for over forty years. our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. product brands include red lion, n-tron and sixnet. with headquarters in york, pennsylvania, the company has offces across the americas, asia-pacifc and europe. for more information, please visit www.redlion.net. red lion is a spectris company. www.redlion.net connect. monitor. control. adld0174 090913 ?2013 red lion controls americas sales@redlion.net asia-pacifc asia@redlion.net europe middle east africa europe@redlion.net +1 (717) 767-6511 sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm instrumentation input select the et-8ins when you need to read thermocouples, or you need isolated 16 bit inputs for high accuracy, or to connect to floating 4-20 ma inputs. et-8ins product highlights ? advanced 16 bit a/d for extreme accuracy ? differential inputs minimize noise and ground loops ? software selectable ranges - mix inputs on module ? linearizes and compensates thermocouple readings ? upscale/downscale thermocouple burnout detection performance specifications ? 8 channels ? lowest voltage range +/- 0.062 volts ? maximum voltage range +/- 10 volts ? auto-polarity current range 4-20 ma, 0-20 ma ? thermocouple types j,k,e,r,t,b,c,n,s 1 ? a/d resolution 16 bits (0.003%) ? full scale accuracy (@20c) +/- 0.02% ? input span and offset adjustability +/- 25% ? span and offset temp. coef ? cient +/- 30 ppm per c typical ? voltage range input impedance 200k ohms ? current range input impedance 100 ohms ? cmrr (@ 50/60 hz) 140 db ? dmrr (@ 50/60 hz) 66 db ? common mode input voltage: between two input terminals +/- 25vdc between inputs and ground 1200 volts ? no damage input voltage +/- 50 vdc ? fastest scan rate (all 8 channels) 100 ms 2 ? required supply voltage 10-30 vdc (1.6 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% notes: 1 thermocouple inputs are cold-junction compensated and reported as f,c, 0.1f or 0.1c. 2 this scan rate applies to modules built after 30-july-04. earlier models may differ. contact us for details. rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information ET-8INS-U instrumentation module with base et-8ins-m replacement module only product datasheet datasheet et-8ins 2-mar-09 all speci ? cations are subject to change. consult factory for latest info. sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm instrumentation input select the et-8ins when you need to read thermocouples, or you need isolated 16 bit inputs for high accuracy, or to connect to floating 4-20 ma inputs. et-8ins product highlights ? advanced 16 bit a/d for extreme accuracy ? differential inputs minimize noise and ground loops ? software selectable ranges - mix inputs on module ? linearizes and compensates thermocouple readings ? upscale/downscale thermocouple burnout detection performance specifications ? 8 channels ? lowest voltage range +/- 0.062 volts ? maximum voltage range +/- 10 volts ? auto-polarity current range 4-20 ma, 0-20 ma ? thermocouple types j,k,e,r,t,b,c,n,s 1 ? a/d resolution 16 bits (0.003%) ? full scale accuracy (@20c) +/- 0.02% ? input span and offset adjustability +/- 25% ? span and offset temp. coef ? cient +/- 30 ppm per c typical ? voltage range input impedance 200k ohms ? current range input impedance 100 ohms ? cmrr (@ 50/60 hz) 140 db ? dmrr (@ 50/60 hz) 66 db ? common mode input voltage: between two input terminals +/- 25vdc between inputs and ground 1200 volts ? no damage input voltage +/- 50 vdc ? fastest scan rate (all 8 channels) 100 ms 2 ? required supply voltage 10-30 vdc (1.6 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% notes: 1 thermocouple inputs are cold-junction compensated and reported as f,c, 0.1f or 0.1c. 2 this scan rate applies to modules built after 30-july-04. earlier models may differ. contact us for details. rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information ET-8INS-U instrumentation module with base et-8ins-m replacement module only product datasheet datasheet et-8ins 2-mar-09 all speci ? cations are subject to change. consult factory for latest info.
|
