universal ac input built-in active pfc function, pf >0.95 protections: short circuit / overload / over voltage fixed switching frequency at pfc: 67khz pwm: 134khz cooling by free air convection led indicator for power on low profle: 33mm thickness model number output volts output amps ripple & noise load reg volt tolerance min load triple output TP75-a 5 volts(dc) 7.0 amps 100mvpk-pk 3.0% 3.0% 1.5~10amps 12 volts(dc) 3.0 amps 120mvpk-pk 4.0% 4.0% 0.2~4.0amps -5 volts(dc) 0.6 amps 100mvpk-pk 8.0% 8.0% 0~0.6amps TP75-b 5 volts(dc) 7.0 amps 100mvpk-pk 3.0% 3.0% 1.5~10amps 12 volts(dc) 3.0 amps 120mvpk-pk 4.0% 4.0% 0.2~4.0amps -12 volts(dc) 0.4 amps 120mvpk-pk 8.0% 8.0% 0~0.6amps TP75-c 5 volts(dc) 6.0 amps 100mvpk-pk 3.0% 3.0% 1.5~10amps 15 volts(dc) 2.5 amps 120mvpk-pk 4.0% 4.0% 0.2~3.0amps -15 volts(dc) 0.5 amps 120mvpk-pk 8.0% 8.0% 0~0.6amps 75w triple output with pfc function TP75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range (note 3) 90-264vac / 127-370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 20 amps @ 230vac input current 1.5 amps max @ 115vac 0.8 amps max @ 230vac leakage current < 2ma / 240 vac power factor @ fl pf > 0.95/230vac >0.98/115vac output specifications voltage and current see selection chart line regulation 1.0% load regulation see selection chart voltage tolerance (note 2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 36ms setup, rise time @ fl 800ms, 60ms over voltage protection 5volts(dc) only: 5.75~6.75volts(dc) shutdown o/p voltage, re-power over current protection 105~150% rated ourtput power hiccup mode, auto-recover dc voltage adjust 5volts(dc) : 4.5~5.5volts(dc) general specifications safety ul60950-1 tuv en60950-1 approved insulation resistance 100m? / 500 volts(dc) emi compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 effciency 70% typ. isolation 3000vac input - output 1500vac input - ground 500vac output - ground 1min ems compliance to en61000-4-2,3,4,5,6,8,11; env50204, en55024 light industry level, criteria a environmental specifications oper. temperature -10c to +60c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20 to +90% rh non cond temperature coeffcient 0.03% / c (0-50c) mtbf 198.4khrs min, mil-hdbk-217f (25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 179 x 99 x 33 inches 7.05 x 3.90 x 1.30 weight 22.93 oz (650g) note 1. ripple and noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor . 2. tolerance: includes set up tolerance, line regulation and load regula - tion. 3. derating may be needed under low input voltages. please check the derating curve for more details. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 75w triple output with pfc function TP75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
75w triple output with pfc function TP75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
75w triple output with pfc function TP75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|