|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
page 1 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com + 100% pin - to - pin drop - in replacement to quartz and mems based xo + differential oscillator for low cost + lvcmos, lvpecl, lvds and cml output signal possible + low power consumption + excellent low rms phase jitter + excellent long time reliability + very tight frequency stability as low as 10 ppm + outstanding long term aging + standard housings: 5.0x3.2; 7.0x5.0 mm + pb - free, rohs and reach compliant / msl1@260c applications features + server, router, raid controller + gigabit ethernet, 10 gigabit ethernet, fiber channel + sata / sas,pci - express, fully buffered dimm + system clock, networking and computing, + etc. high performance dif ferential oscillator series ?dlpo - 2 220.0 800.0 mh z pin symbol functionality 1 oe/st input standby or output enable pin for out+ and out - . oe: when high or open : out+ and out - = active when low : out+ and out - = high impedance state st: when high or open : out+ and out - = active when low : out+ and out - = high impedance state 2 nc na do not connect pin, leave it floating. 3 gnd power v dd power supply ground. connect to ground 4 out+ output 220 to 800 mhz programmable clock output. 5 out - output 6 v dd power power supply voltage p in description top view 1 oe/st v dd 6 gnd 3 out+ 4 nc 2 5 out -
page 2 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com dc electrical specif ications lvcmos input, oe or st pin, 3.3v 10% or 2.5v 10% or 1.8v 5%, - 40 to 85c parameter symbol min . typ. max . unit condition input high voltage v ih 70 C C % v dd input low voltage v il C C 30 % v dd input high current i ih C C 10 a oe or st pin input low current i il - 10 C C a oe or st pin power up time t pu C C 10 ms time from minimum power supply voltage to the first cycle (guaranteed no runt pulses) lvpecl output, 3.3v 10% or 2.5v 10%, - 40 to 85c parameter symbol min . typ . max . unit condition supply voltage v dd 2.97 3.3 3.63 v 2.25 2.5 2.75 v supply current i dd C 68 74 ma v dd = 3.3, excluding load termination current C 65 71 ma v dd = 2.5, excluding load termination current output high voltage v oh v dd - 1.1 C v dd - 0.7 v 50 ohm termination to vdd - 2.0v see figure 1, 2. output low voltage v ol v dd - 2.0 C v dd - 1.4 v pk - pk output voltage swing v swing 600 800 1000 mv lvds output, 3.3v 10% or 2.5v 10%, - 40 to 85c parameter symbol min. typ . max . unit condition supply voltage v dd 2.97 3.3 3.63 v 2.25 2.5 2.75 v supply current i dd C 73 79 ma v dd = 3.3, excluding load termination current C 70 76 ma v dd = 2.5, excluding load termination current differential output voltage v od1 250 350 450 mv swing mode = normal single load termination. see figure 4. vod magnitude change v od1 C C 50 mv offset voltage vos1 C 1.2 C v vos magnitude change v os1 C C 50 mv differential output voltage v od2 500 700 900 mv swing mode = high single load termination. see figure 4. vod magnitude change v od2 C C 50 mv offset voltage v os2 C 1.2 C v vos magnitude change v os2 C C 50 mv differential output voltage v od3 250 350 450 mv swing mode = high double load termination. see figure 5. vod magnitude change v od3 C C 50 mv offset voltage v os3 C 1.2 C v vos magnitude change v os3 C C 50 mv page 3 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com dc electrical specif ications cml output, 3.3v 10% or 2.5v 10% or 1.8v 5%, - 40 to 85c parameter symbol min . typ . max . unit condition supply voltage v dd 2.97 3.3 3.63 v 2.25 2.5 2.75 v 1.71 1.8 1.89 v i dd C 48 51 ma v dd = 3.3v excluding load termination current supply current C 47 50 ma v dd = 2.5v C 38 41 ma v dd = 1.8v output high voltage v oh1 v dd - 0.1 C v dd v swing mode = normal single load termination see figure 6. output low voltage v ol1 v dd - 0.55 v dd - 0.425 v dd - 0.3 v pk - pk output voltage swing v swing1 300 425 550 mv output high voltage v oh2 v dd - 0.1 C v dd v swing mode = high single load termination see figure 6. output low voltage v ol2 v dd - 1.1 v dd - 0.85 v dd - 0.6 v pk - pk output voltage swing v swing2 600 850 1100 mv output high voltage v oh3 v dd - 0.1 C v dd v swing mode = high double load termination see figure 7. output low voltage v ol3 v dd - 0.55 v dd - 0.425 v dd - 0.3 v pk - pk output voltage swing v swing3 300 425 550 mv page 4 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com lvpecl output, 3.3v 10%, - 40 to 85c parameter symbol min . typ . max . unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 160 260 350 ps 20% to 80% rms phase jitter (random) ph j C 0.3 0.44 ps f out = 212.5mhz @ bw: 1.875m hz to10 mhz C 0.3 0.33 ps f out = 312.5 mhz @ bw: 1.875m hz to10 mhz C 0.3 0.34 ps f out = 600 mhz @ bw: 1.875m hz to10 mhz rms period jitter p j C 1.4 1.8 ps f out = 212.5 mhz C 1.4 1.8 ps f out = 312.5 mhz C 1.5 2.2 ps f out = 600 mhz C 1.2 1.6 ps f out = 800 mhz lvpecl output, 2.5v 10%, - 40 to 85c parameter symbol min . typ . max . unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 160 260 350 ps 20% to 80% rms phase jitter (random) ph j C 0.3 0.44 ps f out = 212.5mhz @ bw: 1.875mhz to10 mhz C 0.3 0.33 ps f out = 312.5 mhz @ bw: 1.875mhz to10 mhz C 0.3 0.34 ps f out = 600 mhz @ bw: 1.875mhz to10 mhz rms period jitter p j C 1.4 1.8 ps f out = 212.5 mhz C 1.4 1.8 ps f out = 312.5 mhz C 1.5 2.2 ps f out = 600 mhz C 1.2 1.6 ps f out = 800 mhz ac electrical specif ications page 5 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com lvds output, 3.3v 10%, - 40 to 85c parameter symbol min . typ. max . unit co n dition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 C +25 ppm - 50 C +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 240 310 420 ps 20% to 80% rms phase jitter (random) ph j C 0.4 0.8 ps f out = 212.5mhz @ bw: 1.875m hz to10 mhz C 0.3 0.6 ps f out = 312.5 mhz @ bw: 1.875m hz to10 mhz C 0.2 0.4 ps f out = 600 mhz @ bw: 1.875m hz to10 mhz rms period jitter p j C 1.8 2.5 ps f out = 212.5 mhz C 1.7 2.4 ps f out = 312.5 mhz C 1.7 2.5 ps f out = 600 mhz C 1.5 2.2 ps f out = 800 mhz lvds output, 2.5v 10%, - 40 to 85c parameter symbol min. typ. max . unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 240 310 420 ps 20% to 80% rms phase jitter (random) ph j C 0.4 0.8 ps f out = 212.5mhz @ bw: 1.875mhz to10 mhz C 0.3 0.6 ps f out = 312.5 mhz @ bw: 1.875mhz to10 mhz C 0.2 0.4 ps f out = 600 mhz @ bw: 1.875mhz to10 mhz rms period jitter p j C 1.7 2.4 ps f out = 212.5 mhz C 1.7 2.5 ps f out = 312.5 mhz C 1.6 2.1 ps f out = 600 mhz C 1.4 1.8 ps f out = 800 mhz ac electrical specif ications page 6 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com cml output, 3.3v 10%, - 40 to 85c parameter symbol min. typ . max . unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 270 350 470 ps 20% to 80% rms phase jitter (random) ph j C 0.47 0.53 ps f out = 212.5mhz @ bw: 1.875m hz to10 mhz C 0.32 0.42 ps f out = 312.5 mhz @ bw: 1.875m hz to10 mhz C 0.26 0.34 ps f out = 600 mhz @ bw: 1.875m hz to10 mhz rms period jitter p j C 1.7 2.1 ps f out = 212.5 mhz C 1.7 2.1 ps f out = 312.5 mhz C 1.7 2.2 ps f out = 600 mhz C 1.4 1.8 ps f out = 800 mhz cml, 2.5v 10%, - 40 to 85c parameter symbol min. typ. max. unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 10 C +10 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 15 C +15 ppm - 20 to 70c - 40 to 85c - 20 C +20 ppm - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 270 350 470 ps 20% to 80% rms phase jitter (random) ph j C 0.47 0.53 ps f out = 212.5mhz @ bw: 1.875mhz to10 mhz C 0.32 0.38 ps f out = 312.5 mhz @ bw: 1.875mhz to10 mhz C 0.26 0.34 ps f out = 600 mhz @ bw: 1.875mhz to10 mhz rms period jitter p j C 1.7 2.1 ps f out = 212.5 mhz C 1.7 2.1 ps f out = 312.5 mhz C 1.7 2.2 ps f out = 600 mhz C 1.4 1.8 ps f out = 800 mhz ac electrical specif ications page 7 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com cml, 1.8v 5%, - 40 to 85c parameter symbol min. typ . max . unit condition output frequency f out 220 C 800 mhz frequency stability f stab - 15 C +15 ppm inclusive of initial stability, operating temp., rated power supply voltage change, load change 0 to 70c - 20 C +20 ppm - 20 to 70c - 40 to 85c - 25 +25 ppm - 50 +50 ppm aging f age C C 1 ppm first year @ 25c duty cycle dc 45 C 55 % f out = 220 - 460 mhz, 490 - 610 mhz or 750 - 800 mhz 35 C 65 % f out = 460.1 - 489.9 mhz or 610.1 - 749.9 mhz output rise/fall time t r /t f 270 350 470 ps 20% to 80% rms phase jitter (random) ph j C 0.47 0.53 ps f out = 212.5mhz @ bw: 1.875mhz to10 mhz C 0.32 0.42 ps f out = 312.5 mhz @ bw: 1.875mhz to10 mhz C 0.26 0.34 ps f out = 600 mhz @ bw: 1.875mhz to10 mhz rms period jitter p j C 1.9 2.3 ps f out = 212.5 mhz C 1.8 2.2 ps f out = 312.5 mhz C 1.7 2.3 ps f out = 600 mhz C 1.6 1.9 ps f out = 800 mhz ac electrical specif ications page 8 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com termination diagrams figure 3. lvpecl dc coupled typical term ination without termination voltage (lvpecl - 1) out - out+ drive device d - z0 = 50 ? d+ z0 = 50 ? v dd r4 receiver device r3 v dd r2 r1 v dd = 3.3v => r1 = r3 = 133 ? and r2 = r4 = 82 ? v dd = 2.5v => r1 = r3 = 250 ? and r2 = r4 = 62.5 ? out - out+ d - z0 = 50 ? d+ z0 = 50 ? v dd v tt r1 v dd = 3.3v => r1 = 150 ? v dd = 2.5v => r1 = 120 ? drive device receiver device r1 50 ? 50 ? 100nf 100nf figure 1. lvpecl ac coupled typical term ination (lvpecl - 0) figure 2. lvpecl dc coupled typical term ination with termination voltage (lvpecl - 1) out - out+ d - z0 = 50 ? d+ z0 = 50 ? v dd 50 ? 50 ? v tt = v dd - 2.0 drive device receiver device page 9 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com termination diagrams figure 4. lvds singl e termination (load terminated) figure 5. lvds doubl e termination (source + load terminated) figure 6. cml single load termination out - out+ d - z0 = 50 ? d+ z0 = 50 ? v dd 50 ? 50 ? v dd vt 3.63v drive device receiver device out - out+ d - z0 = 50 ? d+ z0 = 50 ? 100 ? 100 ? drive device receiver device a a b b out - out+ d - d+ 100 ? drive device receiver device z0 = 50 ? z0 = 50 ? note: for ac coupled operation, include/insert decoupling caps at points a or b page 10 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com termination diagrams figure 7. cml double load termination out - out+ d - d+ driver device receiver device z0 = 50 ? z0 = 50 ? 50 ? 50 ? v dd vt1 3.63v v dd vt2 3.63v 50 ? 50 ? a a b b notes: 1. for dc - coupled operation, vt1 = vt2 2. for ac coupled operation, include/insert decoupling caps at points a o r b 3. for ac - coupled operation with capacitors p laced at point a, vt2 sets the input common m ode of receiver device and need not to be related to vt1 page 11 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com dimensions and patte rns package size C dimen sions (unit:mm) 5.0x 3.2 x 0.75 mm recommended land pat tern (unit:mm) #6 #5 #4 #1 #2 #3 0.750.05 3.20.10 5.00.10 #1 #3 #2 #6 #4 #5 0.64 0.9 0.8 2.54 1.20 2.20 2.54 0.90 note: 1. a capacitor value of 0.1 f between v dd and gnd is recommended. package size C dimen sions (unit:mm) 7.0x 5.0 x 0.90 mm recommended land pat tern (unit:mm) #6 #5 #4 #1 #2 #3 0.900.10 5.00.10 7.00.10 1.40 1.10 1.47 5.08 #1 #3 #2 #6 #4 #5 1.60 3.80 5.08 1.60 1.47 2.30 2.60 no connect or connect to gnd (recommended) page 12 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com ordering information dlpo2 33 - 5032 - e - 15 - w - 220.000mhz - t - 1 - n package size 5032 for 5.0 x 3.2 mm 7051 for 7.0 x 5.0 mm (with center - pad) e xample : dlpo233 - 5032 - e - 15 - w - 220.000mhz - t - 1 - n please indicate your required parameters packing method b for bulks or tubes t for tape & reel frequency stability 10 for 10 ppm 15 for 15 ppm 20 for 20 ppm 25 for 25 ppm 50 for 50 ppm feature pin 1 e for output enable s for standby oscillator family dlpo2 supply voltage 18 for 1.8v (cml only( 25 for 2.5v 33 for 3.3v temperature range c for 0 +70c m for - 20 +70c w for - 40 +85c frequency 220.000000 mhz to 800.000000 mhz signaling type 0 = lvpecl - 0 (figure 1) 1 = lvpecl - 1 figure 2, 3) 2 = lvds 3 = cml 4 = lvcmos frequency stability vs. temperature range options frequency stability (ppm) temperature range supply voltage 1.8 v 2.5 v 3.3 v 10 c (0 to +70c) C ? ? m ( - 20 to +70c) C C C w ( - 40 to +85c) C C C 15 c (0 to +70c) ? ? ? m ( - 20 to +70c) C ? ? w ( - 40 to +85c) C ? ? 20 c (0 to +70c) ? ? ? m ( - 20 to +70c) ? ? ? w ( - 40 to +85c) ? ? ? 25 c (0 to +70c) ? ? ? m ( - 20 to +70c) ? ? ? w ( - 40 to +85c) ? ? ? 50 c (0 to +70c) ? ? ? m ( - 20 to +70c) ? ? ? w ( - 40 to +85c) ? ? ? signaling type swing select supply voltage 1.8 v 2.5 v 3.3 v lvpecl - 0 normal C ? ? high C C C lvpecl - 1 normal C ? ? high C C C lvds normal C ? ? high C ? ? cml normal ? ? ? high ? ? ? signaling type vs. s wing select options swing select n = normal h = high (lvds & cml only) samples are available within a short delivery period! page 13 of 13 i spec 01 i rev.00 i november 2014 crystals ? oscillators ? ceramic resonators ? ceramic filters ? saw components petermann - technik gmbh lechwiesenstr. 13 ? d - 86899 ? landsberg am lech tel: +49/8191/305395 ? fax: +49/8191/305397 info@petermann - technik.com ? www.petermann - technik.com premium quality by petermann - technik our company is certi fied according to is o 9001:2008 in o c- tober 2013 by the dm sz certifikation gmbh. this is for you to e nsure that the principles of quality management are fully implemented in our quality ma- nagement system and quality control meth ods also do- minate our quality standards. reflow solder profi le ? petermann - technik gmbh 2014. the information contained herein is subject to change at any time without notice. petermann - techn ik owns all rights, title and interest to the intellectual property related to petermann - technik's products, including any software, fir mware, copyright, pa- tent, or trademark. the sale of petermann - technik products does not convey or imply any license under patent or other rights. pe termann - technik retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by petermann - technik. unless otherwise agreed to in writing by petermann - technik, any reproduction, modification, trans lation, com- pilation, or representation of this material shall be strictly prohibited. |
Price & Availability of DLPO-2-15 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |