1.544 mhz to 200 mhz 25ppm, 50ppm, 100ppm 0c to 70c -20c to 70c -40c to 85c -45c to 90c 3.3v 0.3v 45ma max hcmos 40/60% max @ 50% vdd 10ns max @ 20/% to 80% vdd "0" = 80% vdd max "1" = 90% vdd min 15pf 150ps pk-pk max <3ppm 1 st /yr, <1ppm every year thereafter frequency range: frequency stability: temperature range: operating: (option m) (option x) storage: input voltage: input current: output: symmetry: rise/fall time: logic: load: jitter: aging: td-040405 rev.g 57 mm smd, 3.3v, hcmos cpll-018 model all dimensions are max unl ess otherwise specified. dimensions inches (mm) suggested pad layout 0.071 sq (1.80) 0.165 (4.19) 0.200 (5.08) 0.01uf bypass capacitor recommended 0.071 (1.80) 0.045 0.008 (1.14 0.20) 0.055 typ. (1.40 typ.) 0.200 0.005 (5.08 0.13) #1 #3 #2 #4 0.283 (7.20) 0.204 (5.02) p/n frequency xxxx xx denotes pad 1 xxxx=date code xx=lot code 12730 commonwealth drive ? fort myers, florida 33913 phone: 239-561-3311 ? 800-237-3061 fax: 239-561-1025 ? www.crystek.com crystek corporation designed to meet today's requirements for economical 3.3v applications. available on 16mm tape and reel in quantities of 1k. recommended reflow soldering profile 217c 200c 260c 150c 90 secs. max. temperature ramp-up 3c/sec max. preheat 180 secs. max. 8 minutes max. 260c for 10 secs. max. critical temperature zone ramp-down 6c/sec. note: reflow profile with 240c peak also acceptable. specifications subject to change without notice. pwr supply ma m vm osc. pin 1 pin 4 pin 2 pin 3 bypass cap. o/p load incl probe cl out high impedance gnd or "low" oscillation open or "high" gnd out vdd e/d test circuit function pin 1 output pin active active high z tri-state function cpll-018 x - 25 - 200.000 crystek part number guide #1 crystek clock pll osc. #2 model #3 temp. range: blank= 0/70c, m= -20/70c, x= -40/85c #4 stability: (see table 1) #5 frequency in mhz: 3 or 6 decimal places #1 #2 #3 #5 example: cpll-018x-25-200.000 = 3.3v tristate, -40/85c, 25ppm, 200.000 mhz cpll-018-50-19.660800 = 3.3v tristate, 0/70, 50ppm, 19.660800 mhz #4 blank (std) 100ppm 50 50ppm 25 25ppm stability indicator table 1 open "1" level 2.4v min "0" level 0.4v max
|
