mtg 10 watt dc/dc converter mtg 10 watt dc-dc converter rated 10w output dip24 package single/dual output all speci cations tested typically @ 25 ? c, humidity<7%, nominal input and rated output unless otherwise noted items: operating temperature storage temperature humidity e ciency switching frequency test conditions items: output voltage accuracy output power line regulation load regulation ripple and noise minimum load at nominal load and nominal voltage from 20% to full load 20 mhz bw wide input 2:1 & 4:1 electrical specifications output specifications input specifications other specifications product list min -40oc -55oc 72% min typ. 82% 400 khz typ. max +85oc +125oc 90% max items: input voltage range items: case material mtbf value non-conductive metal casing >1,000,000 hrs 2:1 - 12v 2:1 - 24v 4:1 - 24v 12 24 24 18 36 36 9 18 9 min typ. max 5% 10w 0.5% 2% 10% 100 mv p-p part number output selection - replace ?x? with - ?e? for single output, ?p? for dual output. input voltage range (vdc) output voltage (vdc) max current (ma) e ciency (%typ.) capacitor load max (uf) 9-18 18-36 9-36 9-18 18-36 9-36 9-18 18-36 9-36 5 5 5 9 9 9 12 12 12 75 81 72 78 72 74 75 83 84 2200 2200 1000 6800 2200 2200 6800 6800 2200 2060 2040 1950 1120 1100 1205 820 840 860 mtgx10n-1205 mtgx10n-2405 mtgx10w-2405 mtgx10n-1209 mtgx10n-2409 mtgx10w-2409 mtgx10n-1212 mtgx10n-2412 mtgx10w-2412
mtg 10 watt dc/dc converter 0.7+0.15/ -0 2.54 2.54 0.51 1.93 2.28 4.48 23 15.24 top view bottom view 13 14 15 16 17 12 11 10 9 8 7 5 4 3 2 1 20 21 22 23 24 33 12 package and pinning the product information and speci cations are subject to change without prior notice. pin # single dual 1 n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c n.c 2 3 4 5 7 8 9 10 11 12 13 14 16 17 20 21 22 23 24 15 -vin -vin -vin +vin +vin +vout -vout en en com com -vout +vout +vin +vin -vin
mtg 10 watt dc/dc converter cin load 1 load 2 load cout com cin cout 1 cout 2 +vin +vin +vout -vin -vin +vin -vin -vout +vin +vout -vin -vout single output dc-dc converter en dc-dc converter en typical connection dual output typical component selection: cin >5uf, cout > 10uf. connect ?en? pin to gnd to disable the output. connect ?en? pin to +vin ot leave unconnected to enable the output.
|
