revision 11/17/2011 www.phihong.com 8 port gigabit power over ethernet midspan poe125u for 10/100/1000 base-t networks features ? ieee802.3at pre-standard ? full power of 125w ? 15.4w per port ? low cost ? no power management required ? gigabit compatible ? full protection otp, ocp, ovp ? optional mounting kit for 19? rack ? 1 year warranty ? optional snmpv3 with tls/ssl ? optional cisco legacy detection applications ? voip phones ? security systems ? access points ? ip cameras safety approvals ? cul/ul ? ce mechanical characteristics ? length: 224.9mm (8.85in) ? height: 48.5 mm (1.91in) ? width: 200mm (7.87in) ? weight: 1.4kg (3.0lbs) output specifications optional 19? rack mounting adapter to mount 1 poe125u or 2 side by side; order p/n poe125u-accy01 phihong is not responsible for any error, and reserves the right to make changes without notice. please visit our website at ww w.phihong.com for the most up-to-date specifications and contact information. model number of ports cisco legacy support snmp poe125u-8-r 8 no no poe125u-8-c-r 8 yes no poe125u-8-n-r 8 yes yes
poe125u characteristics www.phihong.com input: ac input voltage range 90 to 264v ac input voltage rating 100 to 240v ac input frequency 47 to 63hz input current 2.5a (rms) maximum for 90v ac 1.3a (rms) maximum for 230v ac leakage current <3.5ma maximum at 254v ac, 60hz ac inrush current 30a (rms) maximum for 115v ac 60a (rms) maximum for 230v ac output: total output power 15.4w per port, 125w total power ripple and regulation 100mv maximum efficiency 75% (typical at maximum load, and 120v ac 60hz hold-up time 10ms minimum 120v ac and maximum load transient o/p voltage protection 60v maximum at switch on and off at any ac line phase turn-on delay time 3 sec maximum at maximum load, and 120v ac 60hz, 25hz immunity esd: en61000-4-2 level 3 rs: en61000-4-3 level 2 eft: en61000-4-4 level 2 surge: en61000-4-5 level 3 cs: en61000-4-6 level 2 voltage dips: en61000-4-11 harmonic: en61000-3-2 class a ieee802.3af interoperability unh interoperability report available upon request feature: cisco legacy detection (option) no extern parts required for legacy devices: voip phones: 7910,7912,7940,7960 access points: 350,1100,1200 over voltage/current, short circuit protection outputs equipped with short circuit protection and overload protection as per 802.3af specification the output can be shorted permanently without damage over temperature protection automat shutdown without damage indicators green led: power detected ?on? yellow led: fault detected input connector ac input iec320 3 pin warranty 1 year poe125u dimension diagram (mm)
|
