? semiconductor components industries, llc, 2007 december, 2007 - rev. 1 1 publication order number: NRVBB1060/d NRVBB1060 switchmode power rectifier this switchmode power rectifier uses the schottky barrier principle with a platinum barrier metal. this state-of-the-art device has the following features: features ? low forward voltage ? 175 c operating junction temperature ? low power loss/high efficiency ? high surge capacity ? this is a pb-free device applications ? power supply - output rectification ? power management mechanical characteristics ? case: epoxy, molded ? epoxy meets ul 94 v-0 @ 0.125 in ? weight: 1.7 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds schottky barrier rectifier 10 amperes, 60 volts device package shipping ? ordering information NRVBB1060t4g d 2 pak (pb-free) 800/tape & reel http://onsemi.com 1 3 4 d 2 pak case 418b style 3 3 4 1 marking diagram b1060g a k a a = assembly location y = year ww = work week b1060 = device code g = pb-free package aka = diode polarity ay ww ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d.
NRVBB1060 http://onsemi.com 2 maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 60 v average rectified forward current (rated v r ) t c = 133 c i f(av) 10 a peak repetitive forward current (rated v r , square wave, 20 khz) t c = 133 c i frm 20 a nonrepetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 150 a peak repetitive reverse surge current (2.0 s, 1.0 khz) i rrm 0.5 a operating junction temperature (note 1) t j 65 to +175 c storage temperature t stg 65 to +175 c voltage rate of change (rated v r ) dv/dt 10,000 v/ s stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. 1. the heat generated must be less than the thermal conductivity from junction-to-ambient: dp d /dt j < 1/r ja . thermal characteristics maximum thermal resistance, junction-to-case r jc 2.0 c/w maximum thermal resistance, junction-to-ambient r ja 60 c/w electrical characteristics maximum instantaneous forward voltage (note 2) (i f = 10 amps, t c = 125 c) (i f = 10 amps, t c = 25 c) (i f = 20 amps, t c = 125 c) (i f = 20 amps, t c = 25 c) v f 0.7 0.8 0.85 0.95 v maximum instantaneous reverse current (note 2) (rated dc voltage, t c = 125 c) (rated dc voltage, t c = 25 c) i r 25 0.10 ma 2. pulse test: pulse width = 300 s, duty cycle 2.0%.
NRVBB1060 http://onsemi.com 3 figure 1. typical forward voltage figure 2. typical reverse current figure 3. current derating, case figure 4. typical capacitance figure 5. typical forward power dissipation 0.6 0 v f , instantaneous voltage (volts) 100 10 v r , reverse voltage (volts) 0 110 t c , case temperature ( c) 14 6.0 8.0 0 v r , reverse voltage (v) 5 0 1000 800 600 300 0 10 2.0 4.0 0 i f(av) , average current (amps) 10 4.0 3.0 2.0 1.0 0 3.0 i f , instantaneous forward current (amps) i i 0.2 0.4 0.8 10 20 30 40 0.1 1.0 120 130 140 150 15 20 40 p 5.0 15 6.0 7.0 1.0 0.1 1.0 , reverse current (ma) r 10 , average forward current (amps) f(av) 1.0 7.0 8.0 9.0 5.0 6.0 square wave t j = 25 c 150 c t j = 150 c 125 c 85 c 0.01 25 c 12 10 16 20 18 900 700 500 400 25 30 35 , average power dissipation (watts) f(av) r jc = 2 c/w t j = 25 c f = 1 mhz square wave dc t j = 85 c 125 c 85 c 0.5 0.1 0.3 0.7 0.9 50 60 180 2.0 4.0 100 200 45 50 9.0 8.0 i pk /i av = i pk /i av = 5.0 i pk /i av = 10 i pk /i av = 20 1.1 1.2 0.001 100 160 170 dc c, capacitance (pf) 10 11 12 13 14 figure 6. typical forward power dissipation 2.0 4.0 0 i f(av) , average current (amps) 10 4.0 3.0 2.0 1.0 0 3.0 p 5.0 15 6.0 7.0 1.0 7.0 8.0 9.0 5.0 6.0 , average power dissipation (watts) f(av) square wave dc t j = 150 c 9.0 8.0 i pk /i av = i pk /i av = 5.0 i pk /i av = 10 i pk /i av = 20 10 11 12 13 14
NRVBB1060 http://onsemi.com 4 r(t), ( c/w) heating time (s) figure 7. single-pulse transient response curves, various mounting conditions 0.01 1 10 100 0.000001 0.01 1 100 heatsink 0.1 10 1000 0.1 socket min pad 1 pad 0.001
NRVBB1060 http://onsemi.com 5 package dimensions d 2 pak 3 case 418b-04 issue j seating plane s g d -t- m 0.13 (0.005) t 23 1 4 3 pl k j h v e c a dim min max min max millimeters inches a 0.340 0.380 8.64 9.65 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.83 d 0.020 0.035 0.51 0.89 e 0.045 0.055 1.14 1.40 g 0.100 bsc 2.54 bsc h 0.080 0.110 2.03 2.79 j 0.018 0.025 0.46 0.64 k 0.090 0.110 2.29 2.79 s 0.575 0.625 14.60 15.88 v 0.045 0.055 1.14 1.40 -b- m b w w notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 418b-01 thru 418b-03 obsolete, new standard 418b-04. f 0.310 0.350 7.87 8.89 l 0.052 0.072 1.32 1.83 m 0.280 0.320 7.11 8.13 n 0.197 ref 5.00 ref p 0.079 ref 2.00 ref r 0.039 ref 0.99 ref m l f m l f m l f variable configuration zone r n p u view w-w view w-w view w-w 123 style 3: pin 1. anode 2. cathode 3. anode 4. cathode *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 8.38 0.33 1.016 0.04 17.02 0.67 10.66 0.42 3.05 0.12 5.08 0.20 mm inches scale 3:1
NRVBB1060 http://onsemi.com 6 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. typical parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800-282-9855 toll free ?usa/canada europe, middle east and africa technical support: ?phone: 421 33 790 2910 japan customer focus center ?phone: 81-3-5773-3850 NRVBB1060/d switchmode is a trademark of semiconductor components industries, llc. literature fulfillment : ?literature distribution center for on semiconductor ?p.o. box 5163, denver, colorado 80217 usa ? phone : 303-675-2175 or 800-344-3860 toll free usa/canada ? fax : 303-675-2176 or 800-344-3867 toll free usa/canada ? email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
