View SZM-5066Z_8337414.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 14 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . bifet hbt ldmos vbias1 rfout gnd rfin nc rfout rfout rfout rfout rfout vpc1 nc nc nc gnd gnd vpc2 vdet vbias2 gnd gnd gnd rfout rfout vc1b vc1b c1b vc1a vc1a c1a c2b vb2b vb2b c2a vb2a vb2b gnd gnd gnd gnd 11 10 40 30 20 1 31 21 SZM-5066Z 5.0v, 5ghz high power linear power amplifier rfmd?s SZM-5066Z is a high-linearity class ab heterojunction bipolar transistor (hbt) amplifier housed in a low-cost, su rface-mountable, plastic qfn multi-chip module package. the SZM-5066Z is made with ingap-on-gaas device technology and fabricated with mocvd for an ideal comb ination of low cost and high reliability. this product is specifically designed for 802.11a/n and 802.16e applications in the 4.9ghz to 5.85ghz bands and can operate from a single voltage supply. the exter- nal output match and bias adjustability allo ws load line optimization for other appli- cations covering 4.9ghz to 5.85ghz. it features an output power detector and high rf overdrive robustness. the rohs compliant, green package has a matte tin fin- ish, designated by the ?z? suffix. features ? single supply voltage 5.0v ? 18db typical gain across band ? p out = 25dbm <2.5% evm ? 4.9ghz to 5.9ghz frequency range applications ? ieee802.11a/n and ieee802.16e applications ? hyperlan ? wifi systems ? commercial and consumer systems ? portable battery-powered equipment ? spread-spectrum and mmds systems ds111108 ? package style: qfn, 40-pin, 6mm x 6mm
2 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . absolute maximum ratings parameter rating unit supply voltage -0.5 to 6.0 v dc power control voltage (v pc ) -0.5 to 6.0 v dc supply current 1000 ma input rf power +10 dbm operating ambient temperature -40 to +85 c storage temperature -40 to +150 c moisture sensitivity tbd parameter specification unit condition min. typ. max. typical conditions temp = 25c, v cc = v pc1 = v pc2 = 5.0v, using a standard ieee802.11a waveform at 54mbps, 64 qam, unless otherwise noted compliance ieee802.11a/n frequency 5.1 5.9 ghz output power 24 25 dbm evm 2.5 3.0 % measured at p out = 25dbm, increase in evm over evm floor. frequency = 5.1ghz to 5.85ghz, -40c to +85c, duty cycle gain 18 db frequency = 5.1ghz to 5.9ghz gain flatness 1.5 db over 5.1ghz to 5.9ghz gain variance 1.25 + db -40c to +85c; f, ? power detect +10 +29 dbm usable power detection range power detect voltage 0.1 1.7 v current operating 800 925 ma at rf p out = +25dbm, v cc = +5v (54mbps) quiescent 730 825 ma rf = off, v cc = v pc = 5.0v i vpc 510ma leakage 2 6 ? a power supply 5.0 v v pc1 and v pc2 input voltage 5.0 v dc turn-on time 1.5 1.8 ? s output stable to within 90% of final gain caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. ex tended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. rohs (restriction of hazardous subs tances): compliant per eu directive 2002/95/ec.
3 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . parameter specification unit condition min. typ. max. compliance, cont. ieee802.11a/n 2nd harmonic freq = 4.900ghz to 5.15ghz -20 dbm/mhz at rated output power using a standard ieee802.11a waveform at 6mbps freq = 5.15ghz to 5.85ghz -20 dbm/mhz at rated output power using a standard ieee802.11a waveform at 6mbps 3rd harmonic -29 dbm/mhz at rated output power across full frequency range using a standard ieee802.11a waveform at 6mbps input and output return loss -15 -10 db stable into output vswr 4:1 no spurs above -47dbm; at p out = 0dbm to 30dbm no damage into output vswr 10:1 at rated p out SZM-5066Zwd410 frequency 5.1 5.90 ghz output power 24 25 dbm evm 2.5 3.0 % measured at p out = 25dbm, increase in evm over evm floor. frequency = 5.1ghz to 5.85ghz, -40c to +85c, duty cycle stability 0 30 dbm pa should be stable when p out is measured from 0dbm to 30dbm gain 33 db frequency = 5.10ghz to 5.90ghz gain flatness 1.5 db over 5.10ghz to 5.90ghz gain variance 1.25 db -40c to +85c; f, beta power detect 10 29 dbm usable power detection range power detect voltage 0.1 1.7 v current operating 900 1000 ma at rf p out = +25dbm, v cc = +5v (54mbps) quiescent 820 850 ma rf = off, v cc = v pc = 5.0v iv pc 510ma leakage 2 6 ua power supply 5 v vpc1 and vcp2 input voltage 5 v dc turn-on time 1.5 1.8 us output stable to within 90% of final gain 2nd harmonic freq = 4.900ghz to 5.150ghz -20 dbm/mhz at rated output power using a standard ieee802.11a waveform at 6mbps freq = 5.15ghz to 5.85ghz -20 dbm/mhz at rated output power using a standard ieee802.11a waveform at 6mbps 3rd harmonic -29 dbm/mhz at rated output power across full frequency range using a standard ieee802.11a waveform at 6mbps input and output return loss -15 -10 db stable into output vswr 4:1 no spurs above -47dbm; at p out = 0dbm to 30dbm no damage into output vswr 10:1 at rated p out
4 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . package drawing qfn, 40-pin, 6.0mm x 6.0mm x 0.5mm pin function description 2,4, 7,8 nc no connection; can be connected to gnd or open or to other pin. 1, 5,10,1 1,18, 21,30, 31,33, 40 gnd these are no connect pins and are not wired inside the package. it is recommended to connect them as shown in the application circuit to achieve the stated performance. 3vbias1 this is the supply voltage for the active bias circuit of the 1st stage. 6rfin this is the rf input pin. 9vpc1 power up/down control pin for the 1st stage. an external seri es resistor is required for proper setting of bias lev- els depending on control voltage. the voltage on this pin should never exceed the voltage on pin 3 by more than 0.5v unless the supply current from pin 3 is limited <10ma. 12,13 ,38,39 vc1a, vc1b these four pins are connected internally to the collector of the 1st stage rf device. to achieve specified perfor- mance, the layout of these pins shou ld match the recommended land pattern. 14,15, 36,37 c1a, c2a, c1b, c2b these pins have capacitors across them internally mounted to the package as shown in the block diagram. they are used as tuning and coupling elements between the 1st and 2nd stages. 16,17, 34,35 vb2a,vb2b these four pins are connected internally to the base of the 2nd stage rf device. to achieve specified perfor- mance, the layout of these pins shou ld match the recommended land pattern. 19 vpc2 power up/down control pin for the 2nd stage. an external series resistor is required for proper setting of bias lev- els depending on control voltage. the voltage on this pin should never exceed the voltage on pin 32 by more than 0.5v unless the supply current from pin 32 is limited <10ma. 20 vdet this is the output port for the power detector. it samples the power at the input of the second stage. 22,23, 24,25, 26,27, 28,29 rfout these are the rf output pins and dc connections to the 2nd stage collector. 32 vbias2 this is the supply voltage for the active bias circuit of the 2nd stage.
5 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . pcb metal land pattern pcb solder mask pattern pcb stencil pattern note: thermal vias for center slug ?c? should be incorporated into the pcb design. the number and size of thermal vias will depend on the application. example of th e number and size of vias can be foun d on the rfmd evaluation board layout.
6 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . pin out (top view) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 29 28 27 26 25 24 23 22 21 40 39 38 37 36 35 34 33 32 31 gnd vbias1 rfin vpc1 vc1a vb2b vc1a c1a c2a vb2a vpc2 vdet rfout rfout rfout rfout rfout rfout rfout rfout vbias2 vb2b c2b c1b vc1b nc nc gnd nc nc gnd gnd gnd gnd gnd gnd gnd vb2b vc1b gnd
7 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . evaluation board schematic 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 29 28 27 26 25 24 23 22 21 40 39 38 37 36 35 34 33 32 31 c7 0.1 f r2 0 ? c20 0.2 pf c22 4.7 pf l2 1.8 nh j1 rf in r11 820 ? r10 3.0 k ? r13 3.0 k ? r14 1.0 k ? c10 0.1 f r1 0 ? c8 1.8 pf l1 1.8 nh c9 1.8 pf c4 1.8 pf c21** 0.4 pf l3 5.6 nh c18 4.7 pf j2 rf_out c5 1.8 pf c6 0.1 f c3 dnp p1 1 2 p1-1 vcc gnd p2 4 3 2 1 p2-3 vpc gnd p2-1 vdet2 gnd vdet2 vpc r12 47 k ? tl1 tl2 tl3 tl4 tl5 tl6 c23 dnp z o ( ? ) e tl1 9.4 9.1 tl2 13.9 4.6 tl3 13.9 14.8 tl4 13.9 28.6 tl5 24.3 61 tl6 50 135 ** place c21 as close as practical to u1. c1 0.1 f c2 1.0 f vcc
8 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . evaluation board schematic - SZM-5066Zwdpcba-410 4 5 6 7 11 14 13 12 29 28 27 30 37 38 39 40 c20 0.2 pf j2 rfout vdet r13 3k ? vpc r2 0 ? r11 820 ? j1 rf in c9 1.8 pf l2 1.8 nh l1 1.8 nh c7 0.1 uf c1 0.1 uf vcc c21 1 pf l3 5.6 nh c10 0.1 uf c23 dnp r1 0 ? p2 1 2 3 4 vdet vpc c18 4.7 pf r7 12 ? 9 8 3 2 1 10 36 35 34 33 32 31 26 25 24 23 22 21 15 16 17 18 19 20 c8 1.8 pf r10 3k ? r14 1k ? r8 13k ? c2 1 uf sta-5063 vcc r12 47k ? c22 4.7 pf c15 4.7 pf l4 6.8 nh c16 1000 pf c25 1 uf sta-5063 vcc r4 56 ? c14 100 pf c24 100 pf 1 2 3 6 5 4 r3 3.9k ? c19 dnp c13 4.7pf l5 1.8 nh c17 4.7pf p1 1 2 vcc nc nc nc nc nc vcc rfin vpc1 nc nc vpc2 vdet vcc vcc rfout u2 sta5063 u1 szm5066 c5 1.8 pf c6 0.1 uf c3 dnp c4 1.8 pf
9 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . evaluation board layout board size 2? x 2? board thickness 0.32?, board material ro4003, multi-layer
10 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . evaluation board layout - SZM-5066Z + sta-5063 board size 2? x 2? board thickness 0.32?, board material ro4003, multi-layer
11 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10.0 15.0 20.0 25.0 evm (%) output power (dbm) evm(%) vs. pout(dbm) 25 c 5150mhz 5360mhz 5725mhz 5875mhz 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10.0 15.0 20.0 25.0 evm (%) output power (dbm) evm(%) vs. pout(dbm) 85 c 5150mhz 5360mhz 5725mhz 5875mhz 0.640 0.660 0.680 0.700 0.720 0.740 0.760 0.780 0.0 5.0 10.0 15.0 20.0 25.0 icc (a) output power (dbm) icc(a) vs. pout(dbm) 25 c 5150mhz 5360mhz 5725mhz 5875mhz 0.620 0.640 0.660 0.680 0.700 0.720 0.740 0.760 0.0 5.0 10.0 15.0 20.0 25.0 icc (a) output power (dbm) icc(a) vs. pout(dbm) 85 c 5150mhz 5360mhz 5725mhz 5875mhz 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10.0 15.0 20.0 25.0 evm (%) output power (dbm) evm (%) versus p out (dbm) -40c 5150mhz 5360mhz 5725mhz 5875mhz 0.640 0.690 0.740 0.790 0.840 0.890 0.0 5.0 10.0 15.0 20.0 25.0 i cc (a) output power (dbm) icc (a) versus p out (dbm) -40c 5150mhz 5360mhz 5725mhz 5875mhz
12 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 0.0 5.0 10.0 15.0 20.0 25.0 gain (db) output power (dbm) gain(db) vs. pout(dbm) 25 c 5150mhz 5360mhz 5725mhz 5875mhz 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 0.0 5.0 10.0 15.0 20.0 25.0 gain (db) output power (dbm) gain(db) vs. pout(dbm) 85 c 5150mhz 5360mhz 5725mhz 5875mhz 4.700 4.750 4.800 4.850 4.900 0.0 5.0 10.0 15.0 20.0 25.0 ivpc (ma) output power (dbm) ivpc(ma) vs. pout(dbm) 25 c 5150mhz 5360mhz 5725mhz 5875mhz 4.940 4.990 5.040 5.090 5.140 0.0 5.0 10.0 15.0 20.0 25.0 ivpc (ma) output power (dbm) ivpc(ma) vs. pout(dbm) 85 c 5150mhz 5360mhz 5725mhz 5875mhz 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 0.0 5.0 10.0 15.0 20.0 25.0 gain (db) output power (dbm) gain (db) versus p out (dbm) -40c 5150mhz 5360mhz 5725mhz 5875mhz 4.465 4.515 4.565 4.615 4.665 0.0 5.0 10.0 15.0 20.0 25.0 i vpc (ma) output power (dbm) i vpc (ma) versus p out (dbm) -40c 5150mhz 5360mhz 5725mhz 5875mhz
13 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0.0 5.0 10.0 15.0 20.0 25.0 pdet (v) output power (dbm) power detect (v) vs. pout(dbm) 25 c 5150mhz 5360mhz 5725mhz 5875mhz 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0.0 5.0 10.0 15.0 20.0 25.0 pdet (v) output power (dbm) power detect (v) vs. pout(dbm) 85 c 5150mhz 5360mhz 5725mhz 5875mhz 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0.0 5.0 10.0 15.0 20.0 25.0 p det (v) output power (dbm) power detect (v) versus p out (dbm) -40c 5150mhz 5360mhz 5725mhz 5875mhz
14 of 14 SZM-5066Z ds111108 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or customerservice@rfmd.com . ordering information ordering code description szm5066z standard 25 piece bag szm5066zsr standard 100 piece reel szm5066ztr13 standard 2500 piece reel szm5066zwdpck-410 fully assembled szm5066z pcba with sta5063 driver and 5 loose sample pieces szm5066zpck-410 fully assembled szm5066zpcba410 and 5 loose sample pieces

▲Up To Search▲

Price & Availability of SZM-5066Z

	To Download SZM-5066Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .