isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 3004p5r2blkm1qe 1.5:1 2/5/2007 T346019 b tn 1 1 a 16948 released for production 2/1/07 tn note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 2a @250vac, 5a @120vac or 28vdc 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating te mp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. package: bag/25 pieces per 4pdt 3 way circuit note: jumper pin 3 to 5, 9 to 11 12 11 10 9 8 7 6 5 4 3 2 1 pos. 1 pos. 2 pos. 3 9 8 7 3 2 1 12 11 10 6 5 4 (in) (in) (in) (in) (out) (out) (out) (out) open 23.80 [.937 in] 29.36 [1.156 in] 6.99 [.275 in] 9.27 [.365 in] 22.22 [.875 in] 18.80 [.740 in] 3.50 [.138 in] 4.13 [.163 in] 2.13 [.084 in] r8.43 [.332 in] .50 [.020 in] 11.21 [.441 in] 3.96 [.156 in] 4.70 [.185 in] .76 [.030 in] 2.03 [.080 in] 21.59 [.850 in] 10 11 12 12 9 6 3 12.70 [.500 in] e-switch logo opposite side pos. 1pos. 2pos. 3 switch function off on (on) 2-3, 5-6, 8-9, 11-12 open 2-1, 5-4, 8-7, 11-10 1.98 [.078 in] 1.19 [.047 in] n 2.39 [.094 in] epoxy seal 25 ~ pos. 1 pos. 2 pos. 3 b 16960 added switch pos. to drawing 2/5/07 tn
|