hs501dr series assemblies ? 10 amp ac output @ 40c ? single channel output ? 3 to 32 vdc input control voltage ? din rail mounted ? ul, csa, vde, ce approved ssrs product selection description 10 a 10 a 3-32 vdc control hs501dr-d2425 HS501DR-HD6025 output specifications (1) description hs501dr-d2425 HS501DR-HD6025 operating voltage (47-63hz) [vrms] 24-280 48-660 transient overvoltage [vpk] 600 1200 maximum off-state leakage current @ rated voltage [marms] 10 10 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 maximum load current [arms] 10 10 minimum load current [arms] 0.04 0.04 maximum surge current (16.6ms) [apk] 250 250 maximum on-state voltage drop @ rated current [vpk] 1.6 1.7 maximum i2t for fusing (8.3 msec) [a2 sec] 260 260 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description hs501dr-d2425 HS501DR-HD6025 control voltage range 3-32 vdc 3-32 vdc minimum turn-on voltage 3.0 vdc 3.0 vdc minimum turn-off voltage 1.0 vdc 1.0 vdc maximum reverse voltage 32 vdc 32 vdc typical input current 3.4 ma @ 5 vdc 2.0 ma (3) nominal input impeadance 1500 ohms (3) maximum turn-on time [msec] 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohms maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80 ? c ambient storage temperature range -40 to 125 ? c status indicator display none weight (typical) 0.31 lb. (141g) encapsulation themally conductive epoxy recommended terminal screw torque range: 6-32 screws - 10 in/lbs. 8-32 screws - 20 in/lbs. (screws dry without grease) thermal pad installed yes general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) input circuitry for dc control version incorporates active current limiter (hd model only)
mechanical specifications thermal derate information agency approvals a gency approvals are for relay only. e116949 (d2425) e116950 (hd6025) lr81689 vde 10143 ug rev. 110211
annex - enviromental information
|