isometric isometric detail a title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200awmdp1t1a4m2re special 2:1 12/11/2008 T201117 c blr 1 1 circuit: dpdt p.c. mounting panel mounting a 8.81 [.347 in] 25 ~ pos.1 pos. 3 pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 open 2-1, 5-4 2 1 3 5 4 6 2.54 [.100 in] 5.08 [.200 in] note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 0.4va @ 20vac or vdc max. 6. electric life: 50,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. seal rated: ip 67 a 18169 released for production 7/10/08 blr 8.13 [.320 in] 9.14 [.360 in] 8.81 [.347 in] 2.54 [.100 in] 5.08 [.200 in] 3.30 [.130 in] .51 [.020 in] 2.54 [.100 in] ? .76 [.030 in] n 1.09 [.043 in] 4 5 6 epoxy seal 6 3 10-48 uns 2a full length (less chamfer and flange) 5.90 [.232 in] rating, e-switch logo flat (location is critical) 2.09 [.082 in] 4.57 [.180 in] 1 2 3 4 5 6 flat (ref) b 18181 actuator / bushing heights finalized 7/18/08 blr b b c 18347 add flange, chamfer to bushing 12/11/08 blr .40 [.016 in] x 45 chamfer 4.85 [.191 in] 4.60 [.181 in] n (ref) .80 [.031 in] 2.36 [.093 in] c c
|