low profile small, compact pcb format isolated auxiliary outputs low noise 85-264 vac universal input optional covers & looms international safety approvals input input voltage 85-264 vac (110-370 vdc) input frequency 47-440 hz inrush current 60 a max at 200 v input & full load (cold start) output hold-up time 10 ms min at 85 v input & full load (100 ms typical at 200 v input) output voltage see table, 5 v adjustable, v1 is isolated from v2 & v3 output voltage 5 v ?% adjustment output voltage 6% max set point line regulation 0.4% max over specified input range load regulation 2% 5 v output, 1% auxiliary outputs ripple & noise 40 mv pk-pk typical (180 mv pk-pk max) minimum load no minimum load - see note 3 short circuit & operates >105% of rating overload protection auto recovery overvoltage operates >115% of rating +5 v output protection general switching frequency variable frequency 40-400 khz dependant on line & load efficiency 70-72% typical isolation input to output 3000 vac for 1 min, 500 vdc, 50 mohm input to earth 2000 vac for 1 min, 500 vdc, 50 mohm output to earth 500 vac for 1 min, 500 vdc, 50 mohm leakage current 0.75 ma max. mating connectors available as an option cable looms available as an option covers available as an option environmental operating -10? to +70?, derate above +50 ? temperature consult sales office storage -20 ? to +75 ? temperature relative humidity 20-90% non-condensing vibration 10-55 hz at 2 g, 3 mins period for 60 mins along x, y & z axis shock 20 g for 11 ms, once on x, y & z axis emc & safety emc fcc curve b, en55022b safety approvals approved to ul1950, iec950, csa22.2 no.234, en60950 15-60 watts cpc series triple output switchers specification t he xp erts i n p ower www.xpplc.com sales@xpplc.com
operating characteristics www.xpplc.com sales@xpplc.com ac-dc power supplies triple output switchers 15-60 watts cpc series 1. isolated from 2 & 3. 2. linear regulated.. 3. the specified output currents are available for a maximum duration of 10 s if the average current level is below rating and the total power is below rating for the unit. outputs 2 & 3 may be loaded to 80% of their rated current when +5 v is not loaded. ?g terminal should be used as ac input earth. it is isolated from the dc output. 4. mating input & output connectors are available. example: order as cpc30 con kit for 30 watt models. 5. loom kit option: comprising of 2 x 300 mm length cable looms, one terminated with a mating connector for input and the other for output terminals. 6. cover option: wrap around chassis & safety cover supplied as a kit or fitted. notes output voltage & current ratings cpc output output ratings model power output 1 (1) output 2 (2) output 3 (2) number 15 w +5 v @ 2.0 a (3.0 a pk) +12 v @ 0.3 a (0.6 a pk) -12 v @ 0.2 a (0.30 a pk) CPC15UT1 15 w +5 v @ 2.0 a (3.0 a pk) +15 v @ 0.3 a (0.6 a pk) -15 v @ 0.2 a (0.30 a pk) cpc15ut2 30 w +5 v @ 3.0 a (4.5 a pk) +12 v @ 1.2 a (2.0 a pk) -12 v @ 0.3 a (0.45 a pk) cpc30ut1 30 w +5 v @ 3.0 a (4.5 a pk) +15 v @ 1.0 a (2.0 a pk) -15 v @ 0.3 a (0.45 a pk) cpc30ut2 60 w +5 v @ 5.0 a (7.0 a pk) +12 v @ 2.5 a (3.5 a pk) -12 v @ 0.5 a (0.70 a pk) cpc60ut1 60 w +5 v @ 5.0 a (7.0 a pk) +15 v @ 2.0 a (3.5 a pk) -15 v @ 0.5 a (0.70 a pk) cpc60ut2 pin assignment cn1 cn2 i/o connector mating connector (terminal) cn1 b3p5-vh vhr-5n (svh-21t-1.1 or svh-21-p1.1) cn2 b8b-xh-a xhp-8 (bxh-001t-p0.6 or sxh-001t-p0.6) pin no. input 1 ac(l) 2 3 ac(n) 4 5fg pin no. input 1v 1 2v 1 3g 1 4g 1 5v 2 6g 2 7g 2 8v 3 mfr: jst notes: 2 a per pin maximum for cn2 weight: 150g or less tolerance: + 1 dimensions in mm pwb material: glass composite (cem3) mechanical details - 15 watt models fuse rating 250 v t2 a supplied as cover kit (not fitted). order as cpc15/cover kit supplied fitted use suffix c e.g. CPC15UT1-c covered version pcb version
www.xpplc.com sales@xpplc.com supplied as cover kit (not fitted). order as cpc30/cover kit supplied fitted use suffix c e.g. cpc30ut1-c covered version pin assignment cn1 cn2 i/o connector mating connector (terminal) cn1 b3p5-vh vhr-5n (svh-21t-1.1 or svh-21-p1.1) cn2 b6p-vh vhr-6n (svh-21t-1.1 or svh-21t-p1.1)) pin no. input 1 ac(l) 2 3 ac(n) 4 5fg pin no. input 1v 3 2g 2 3g 2 4v 2 5g 1 6v 1 fuse rating 250 v t3 a mfr: jst pcb version mechanical details - 30 watt models mechanical details - 60 watt models notes: 2 a per pin maximum for cn2 weight: 220g or less tolerance: + 1 dimensions in mm pwb material: glass composite (cem3) pin assignment cn1 cn2 pin no. input 1 ac(l) 2 3 ac(n) 4 5fg pin no. input 1v 3 2g 2 3g 2 4v 2 5g 1 6g 1 7v 1 8v 1 fuse rating 250 v t3 a pcb version covered version supplied as cover kit (not fitted). order as cpc60/cover kit supplied fitted use suffix c e.g. cpc60ut1-c i/o connector mating connector (terminal) cn1 b3p5-vh vhr-5n (svh-21t-1.1 or svh-21-t-p1.1) cn2 b8p-vh vhr-8n(svh-21t-1.1 or svh-21t-p1.1) mfr: jst notes: 5 a per pin maximum for cn2 weight: 300g or less tolerance: + 1 dimensions in mm pwb material: glass composite (cem3)
www.xpplc.com sales@xpplc.com ac-dc power supplies triple output switchers 15-60 watts cpc series loom kit - 15 watt models loom kit - 30 watt models loom kit - 60 watt models loom kits cpc pin no. wire gauge colour input 1 0.5 mm brown l 2--- 3 0.5 mm blue n 4--- 5 0.5 mm grn/yel e pin no. wire gauge colour output 1 & 2 22 awg red v 1 3 & 4 22 awg black g 1 5 22 awg yellow v 2 6 & 7 22 awg black g 2 8 22 awg grey v 3 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 6 7 8 11.81?(300 mm) input connector output connector 11.81?(300 mm) 11.81?(300 mm) input connector input connector output connector output connector 11.81?(300 mm) 11.81?(300mm) 11.81?(300 mm) order as cpc 15 loom kt order as cpc 30 loom kt order as cpc 60 loom kt pin no. wire gauge colour input 1 0.5 mm brown l 2--- 3 0.5 mm blue n 4--- 5 0.5 mm grn/yel e pin no. wire gauge colour output 1 0.5 mm grey v 3 2 & 3 0.5 mm black g 2 4 0.5 mm yellow v 2 5 0.5 mm black g 1 6 0.5 mm red v 1 pin no. wire gauge colour output 1 & 2 0.5 mm grey v 3 2 & 3 0.5 mm black g 2 4 0.5 mm yellow v 2 5 & 6 0.5 mm black g 1 7 & 8 0.5 mm red v 1 pin no. wire gauge colour input 1 0.5 mm brown l 2--- 3 0.5 mm blue n 4--- 5 0.5 mm grn/yel e rev 2.0
|
