visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j 5050 s 2 hf rev a ultra low profile 0805 power divider 50 to 50 description the PD1722J5050S2HF is a low profile, subminiatur e wilkinson power divider in an easy to use surface mount package. the pd1722j5 050s2hf is ideal for high volume manufacturing and delivers higher performanc es than traditional printed and lumped element solutions. the PD1722J5050S2HF is m atched to 50 and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: wcdma, and gsm, the PD1722J5050S2HF does not include the resistive element and therefore, requires an extern al resistor for operation. the PD1722J5050S2HF is available on tape and reel for h igh volume manufacturing pick and place. detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 1700 2200 mhz input port impedance 50 output port impedance 50 return loss 10 13 db insertion loss* 0.6 0.8 db amplitude balance 0.1 0.3 db phase balance 1 3 degrees isolation (output ports) 15 18 db power handling 2 watts features: ? 17002200 mhz ? 15 db isolation (output ports) ? 0.5mm height profile ? 50 input / 50 outputs ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? external resistor required ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing mechanical outline dimensions are in millimeters 2.040.10 1.290.10 0.540.05 1 2 3 6 5 6x 0.30 gnd designation 2x 0.15 4x 0.37 6x 0.22 4x 0.65 6x 0.98 orientation marker denotes pin location 4 orientation marker denotes pin location top view (near side) side view bottom view (far side) 5 4 2 16 3 pin gnd gnd output 2 output 1 input
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j 5050 s 2 hf rev a typical broadband performance: 500 mhz. to 6.0 ghz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] insertion loss 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j 5050 s 2 hf rev a typical performance: 1700 mhz. to 2200 mhz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 1700 1800 1900 2000 2100 2200 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 1700 1800 1900 2000 2100 2200 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 1700 1800 1900 2000 2100 2200 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 1700 1800 1900 2000 2100 2200 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 1700 1800 1900 2000 2100 2200 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j 5050 s 2 hf rev a mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the PD1722J5050S2HF is a wilkinson power divid er, an external 0603 100 resistor must be mounted in locations r1 as sh own in the figure below. all of the xinger components are constructed from c eramic filled ptfe composites which possess excelle nt electrical and mechanical stability having x and y thermal coe fficient of expansion (cte) of 17 ppm/ o c. pad footprint w/ 0603 resistor locations circuit pattern footprint pad (s) solder resist mounting footprint dimensions are in millimeters 6x .41 6x .33 .04 4x .25 .66 3x plated thru holes to ground 3x transmission lines r1
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j 5050 s 2 hf rev a packaging and ordering information parts are available in reels and are packaged per e ia 4812. parts are oriented in tape and reel as s hown below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . 8.00 4.00 2.00 .25 2.41 1.75 3.50 4.00 1.60 .81
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? PD1722J5050S2HF
|
