d, g www.vishay.com vishay dale revision: 22-oct-12 1 document number: 31040 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 carbon film resistors, sp ecial purpose, high voltage features ? ratings to 100 w, 125 kv ? available with either radial bands or ferrule terminals ? standard models epoxy/enamel coated, additional vinyl heat shrink sleeve ava ilable for added protection ? model g is non-inductive ? 20 % tolerance standard, to lerances of 15 %, 10 % and 5 % available ? see models b and t for ge neral purpose high voltage carbon film resistors notes (1) continuous working voltage shall be or maximum working voltage, whichever is less. (2) all resistance values are calibrated at 100 v dc -calibration at other voltages available on request. (3) 20 % standard, 5 %, 10 %, and 15 % are available. note ? for additional information on packaging, refer to the through-hole resistor packaging document ( www.vishay. com/doc?31544 ). standard electrical specifications global ? model historical model power rating p 70 c w maximum working voltage (1) v resistance range (2) ? tolerance (3) % style dju dju 10 25k 50k to 500m 5, 10, 15, 20 3 dpw dpw 20 35k 100k to 500m 5, 10, 15, 20 3 dpw..1 dpw-1 20 35k 100k to 500m 5, 10, 15, 20 4 dpx dpx 30 65k 100k to 500m 5, 10, 15, 20 3 dpx..1 dpx-1 30 65k 100k to 500m 5, 10, 15, 20 4 dvy dvy 60 90k 400k to 500m 5, 10, 15, 20 3 dvy..1 dvy-1 60 90k 400k to 500m 5, 10, 15, 20 4 dzw dzw 35 40k 300k to 500m 5, 10, 15, 20 3 dzw..1 dzw-1 35 40k 300k to 500m 5, 10, 15, 20 4 dzz dzz 100 125k 700k to 500m 5, 10, 15, 20 3 dzz..1 dzz-1 100 125k 700k to 500m 5, 10, 15, 20 4 gju gju 10 16k 1k to 1m 5, 10, 15, 20 3 non-inductive gpw gpw 20 18k 1k to 1m 5, 10, 15, 20 3 gpw..1 gpw-1 20 18k 1k to 1m 5, 10, 15, 20 4 gpx gpx 30 25k 1k to 1m 5, 10, 15, 20 3 gpx..1 gpx-1 30 25k 1k to 1m 5, 10, 15, 20 4 gvy gvy 60 30k 1k to 5m 5, 10, 15, 20 3 gvy..1 gvy-1 60 30k 1k to 5m 5, 10, 15, 20 4 gzw gzw 35 20k 1k to 1m 5, 10, 15, 20 3 gzw..1 gzw-1 35 20k 1k to 1m 5, 10, 15, 20 4 gzz gzz 100 32k 1k to 10m 5, 10, 15, 20 3 gzz..1 gzz-1 100 32k 1k to 10m 5, 10, 15, 20 4 global part number information p x r new global part numbering: dpw2m50lb191 (preferred part numbering format) historical part number example: dpw-12m50l (will continue to be accepted) dpw-1 2m50 l b19 historical model resistance value tolerance code packaging global model resistance value t olerance packaging special code (see standard electrical r = j = 5 % e19 = lead (pb)-free, bulk (all, except dju, gju) e03 = lead (pb)-free, skin (dju, gju only) b19 = tin/lead, bulk (all, except dju, gju) j03 = tin/lead, skin (dju, gju only) specifications table) k = k k = 10 % m = m l = 15 % 100r = 100 m = 20 % 13k0 = 13 k 1 = ferrule terminals 500m = 500 m dpw2m 5 0 lb 1 9 1 blank = standard (dash number) (up to 3 digits) from 1 to 999 as applicable
d, g www.vishay.com vishay dale revision: 22-oct-12 2 document number: 31040 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches (millimeters) note (1) dimensional tolera nces are 0.016" (0.406 mm) or 1 %, whichever is greater. derating global ? model style a b (1) cd dju 3 4.50 (114.30) 0.750 (19.05) 0.50 (12.70) n/a dpw 3 6.50 (165.10) 1.13 (28.70) 0.75 (19.05) n/a dpw..1 4 7.69 (195.33) 1.13 (28.70) n/a 0.812 (20.62) dpx 3 10.50 (266.70) 1.13 (28.70) 0.75 (19.05) n/a dpx..1 4 11.69 (296.93) 1.13 (28.70) n/a 0.812 (20.62) dvy 3 14.50 (368.30) 1.50 (38.10) 1.13 (28.70) n/a dvy..1 4 15.69 (398.53) 1.50 (38.10) n/a 1.14 (28.96) dzw 3 6.50 (165.10) 2.0 (50.80) 1.56 (39.62) n/a dzw..1 4 7.69 (195.33) 2.0 (50.80) n/a 1.14 (28.96) dzz 3 18.50 (469.90) 2.0 (50.80) 1.56 (39.62) n/a dzz..1 4 19.69 (500.13) 2.0 (50.80) n/a 1.14 (28.96) gju 3 4.50 (114.30) 0.750 (19.05) 0.50 (12.70) n/a gpw 3 6.50 (165.10) 1.13 (28.70) 0.75 (19.05) n/a gpw..1 4 7.69 (195.33) 1.13 (28.70) n/a 0.812 (20.62) gpx 3 10.50 (266.70) 1.13 (28.70) 0.75 (19.05) n/a gpx..1 4 11.69 (296.93) 1.13 (28.70) n/a 0.812 (20.62) gvy 3 14.50 (368.30) 1.50 (38.10) 1.13 (28.70) n/a gvy..1 4 15.69 (398.53) 1.50 (38.10) n/a 1.14 (28.96) gzw 3 6.50 (165.10) 2.0 (50.80) 1.56 (39.62) n/a gzw..1 4 7.69 (195.33) 2.0 (50.80) n/a 1.14 (28.96) gzz 3 18.50 (469.90) 2.0 (50.80) 1.56 (39.62) n/a gzz..1 4 19.69 (500.13) 2.0 (50.80) n/a 1.14 (28.96) style 3 style 4 0.781 (19.84) c b 0.172 (4.37) dia. 0.313 (7.95) a 0.516 (13.11) a d b marking - dale ? - model ? - value ? - tolerance ? - date code 0 20 40 60 80 100 120 140 160 180 25 ambient temperature in c 120 100 80 rated power in % 60 40 20 0
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
