design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. electric double la yer capacitors (g old capacitor)/ se ? eec-6 ? p 0 d 0 p 1 f p 2 p 5.4 0.8 d h 1 13.4 max. h 0 w w 1 w 2 w 0 o h + + o h 1 10.5 max. features endurance : 70 c 1000 h automatic insertion available rohs directiv e compliant stacked coin type series: se speci? cations category temp. range ?5 ? to +70 ? maximum operating voltage 5.5 v.dc nominal cap.range 0.022 f to 0.22 f characteristics at low t emperature capacitance change ?0 % of initial measured value at +20 ? (at ?5 ?) internal resistance < 5 times of initial measured value at +20 ? (at ?5 ?) endurance after 1000 hours application of 5.5 v. dc at +70 ?, the capacitor shall meet the following limits. capacitance change ?0 % of initial measured value internal resistance < 4 times of initial speci? ed value shelf life after 1000 hours storage at +70? without load, the capacitor shall meet the speci? ed limits for endurance. di men sions in mm(not to scale) recommended applications memory back -up fo r video and audio equipment, cameras, tele phones, printers, data terminals, rice cookers and intelligent remote controls. standard products maximum op er at ing volt age capacitance capacitance tolerance internal resistance (initial speci? ed value) part number min. packaging q ty (v.dc) (f) (f) ( ) at 1khz (pcs) 5.5 0.022 0.0176 to 0.0396 < 150 eecse0h223 1000 0.047 0.0376 to 0.0846 < 120 eecse0h473 1000 0.10 0.080 to 0.180 < 75 eecse0h104 1000 0.22 0.176 to 0.396 < 75 eecse0h224 1000 +0.8 ?.2 dimensions nominal tolerance d 0.55 ?.05 p0 12.7 ?.2 f 5.0 w 18.0 ?.5 w 0 5.5 < w 1 9.0 ?.5 w 2 0 to 3.0 h 0 16.4 ?.5 d 0 4.0 ?.2 p 12.7 ?.0 p 1 3.85 ?.50 p 2 6.35 ?.00 h, h 1 0 ?.0 h 1 30.3 > note: 1. when ordering please observe the minimum packaging quantity. 2. when the surface mount component goes through uv or a heat oven to af? x the adhesive glue, the capacitor s surface temperature should not exceed 100 ? for more than 60 seconds (maximum tem per a ture should not exceed 105 ?) 3. do not use re? ow soldering. (ir, atmosphere heating methods, etc.) please refer to the page of ?pplication guidelines? (unit : mm) 01 feb. 2013
|
